Effective and Low-Cost Saccharification of Pineapple Peel by Trichoderma viride Crude Extract with Enhanced β-Glucosidase Activity

2016 ◽  
Vol 9 (3) ◽  
pp. 701-710 ◽  
Author(s):  
Janaína Marques de Almeida ◽  
Vanderlei Aparecido de Lima ◽  
Patrícia Carla Giloni de Lima ◽  
Adriana Knob
Keyword(s):  
Crude Extract ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Glucosidase Activity ◽  
Pineapple Peel

scholarly journals Extraction of short chain chitooligosaccharides from fungal biomass and their use as promoters of arbuscular mycorrhizal symbiosis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Andrea Crosino ◽  
Elisa Moscato ◽  
Marco Blangetti ◽  
Gennaro Carotenuto ◽  
Federica Spina ◽  
...  
Keyword(s):  
Fungal Biomass ◽  
Large Scale ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Arbuscular Mycorrhizal ◽  
Am Fungi ◽  
Production Costs ◽  
Short Chain ◽  
Mycorrhizal Symbiosis ◽  
Major Interest

AbstractShort chain chitooligosaccharides (COs) are chitin derivative molecules involved in plant-fungus signaling during arbuscular mycorrhizal (AM) interactions. In host plants, COs activate a symbiotic signalling pathway that regulates AM-related gene expression. Furthermore, exogenous CO application was shown to promote AM establishment, with a major interest for agricultural applications of AM fungi as biofertilizers. Currently, the main source of commercial COs is from the shrimp processing industry, but purification costs and environmental concerns limit the convenience of this approach. In an attempt to find a low cost and low impact alternative, this work aimed to isolate, characterize and test the bioactivity of COs from selected strains of phylogenetically distant filamentous fungi: Pleurotus ostreatus, Cunninghamella bertholletiae and Trichoderma viride. Our optimized protocol successfully isolated short chain COs from lyophilized fungal biomass. Fungal COs were more acetylated and displayed a higher biological activity compared to shrimp-derived COs, a feature that—alongside low production costs—opens promising perspectives for the large scale use of COs in agriculture.

Homogenate Extraction of Dihydroartemisinin from Artemisia Hedinii and Its Antifungal Activity

2021 ◽  
Author(s):  
Cong You ◽  
Jun Yu ◽  
Guangjiong Qin ◽  
JinPeng Yang ◽  
Chunlei Yang ◽  
...  
Keyword(s):  
Antifungal Activity ◽  
Crude Extract ◽  
Spore Germination ◽  
Alternaria Alternata ◽  
Low Cost ◽  
Pathogenic Fungi ◽  
Extraction Yield ◽  
Optimal Conditions ◽  
Extraction Technology ◽  
Homogenate Extraction

Abstract Background Artemisia hedinii is a well-known traditional Chinese medicine. It can be used to extract dihydroartemisinin (DHA). Objective The purpose of this study was to explore the optimal conditions for the homogenate extraction of DHA from A. hedinii and the antifungal activity of DHA. Methods In this study, single factor experiments and response surface method were used to determine the optimal extraction conditions of crude extract and DHA, the method of spore germination was used to study the antifungal activity of DHA to Alternaria alternata. Result The optimal conditions were found as fellow: ratio of liquid to material 22 mL/g; Extraction time 60 s; soaking time 34 min. Under these conditions, extraction yield of DHA was (1.76 ± 0.04%). When the concentration of crude extract were 0.5 and 8 mg/mL, the spore germination inhibition rates of Alternaria alternata were (17.00 ± 2.05%) and (92.56 ± 2.01%), which were 3.34 and 1.15 times that of DHA standard, respectively. Conclusion Homogenate extraction technology is a fast and efficient method to extract DHA from A. hedinii. The crude extract has significant antifungal activity against A. alternata with low cost, which provides a possibility for the use of DHA in the prevention and treatment of plant pathogenic fungi. Highlights The optimum conditions of the extraction of DHA from A. hedinii by homogenate extraction were obtained. DHA has antifungal activity against A. alternata. Compared with pure DHA, the crude extract has stronger antifungal activity against A. alternata.

scholarly journals Longevity of Raw and Lyophilized Crude Urease Extracts

2021 ◽  
Vol 2 (2) ◽  
pp. 325-334
Author(s):  
Neda Javadi ◽  
Hamed Khodadadi Tirkolaei ◽  
Nasser Hamdan ◽  
Edward Kavazanjian
Keyword(s):  
Crude Extract ◽  
Room Temperature ◽  
Low Cost ◽  
Extraction Process ◽  
Crude Extracts ◽  
Simple Extraction ◽  
Commercial Applications ◽  
Stable Source ◽  
The Stability ◽  
The Cost

The stability (longevity of activity) of three crude urease extracts was evaluated in a laboratory study as part of an effort to reduce the cost of urease for applications that do not require high purity enzyme. A low-cost, stable source of urease will greatly facilitate engineering applications of urease such as biocementation of soil. Inexpensive crude extracts of urease have been shown to be effective at hydrolyzing urea for carbonate precipitation. However, some studies have suggested that the activity of a crude extract may decrease with time, limiting the potential for its mass production for commercial applications. The stability of crude urease extracts shown to be effective for biocementation was studied. The crude extracts were obtained from jack beans via a simple extraction process, stored at room temperature and at 4 ℃, and periodically tested to evaluate their stability. To facilitate storage and transportation of the extracted enzyme, the longevity of the enzyme following freeze drying (lyophilization) to reduce the crude extract to a powder and subsequent re-hydration into an aqueous solution was evaluated. In an attempt to improve the shelf life of the lyophilized extract, dextran and sucrose were added during lyophilization. The stability of purified commercial urease following rehydration was also investigated. Results of the laboratory tests showed that the lyophilized crude extract maintained its activity during storage more effectively than either the crude extract solution or the rehydrated commercial urease. While incorporating 2% dextran (w/v) prior to lyophilization of the crude extract increased the overall enzymatic activity, it did not enhance the stability of the urease during storage.

scholarly journals ​Antagonistic Activity of Panchagavya and Trichoderma spp. against Wilt Complex causing Pathogens of Chickpea (Cicer arietinum L.)

2022 ◽  
Author(s):  
H.V. Parmar ◽  
N.M. Gohel
Keyword(s):  
Low Cost ◽  
Trichoderma Viride ◽  
Macrophomina Phaseolina ◽  
Antagonistic Activity ◽  
Culture Technique ◽  
Plant Diseases ◽  
Dual Culture ◽  
Trichoderma Spp ◽  
Soil Borne Pathogens ◽  
Chickpea Wilt

Background: Chickpea wilt complex caused by several soil-borne pathogens is the major yield-reducing malady worldwide. Biological control is one of the best, low-cost and ecologically sustainable method for managing plant diseases caused by soil-borne pathogens. Methods: In this present investigation Panchagavya and Trichoderma spp. were evaluated by following poisoned food technique and dual culture technique against wilt complex causing pathogens i.e. Fusarium oxysporum f. sp. ciceri, Fusarium solani and Macrophomina phaseolina. Result: Among the different isolates of Trichoderma spp. evaluated, Trichoderma viride (AAU isolate) was highly antagonistic to F. oxysporum f. sp. ciceri (52.78%) and F. solani (65.37%) whereas, Trichoderma asperellum (AAU isolate) was highly antagonistic to M. phaseolina (65.93%). Panchagavya at the highest concentration (50%) showed significantly higher efficacy (80.74, 66.62 and 49.67%) in inhibiting the mycelial growth of all three pathogens and at the lowest concentration it was moderately effective.

Potential of Agricultural Waste Material (Ananas cosmos) as Biosorbent for Heavy Metal Removal in Polluted Water

2020 ◽  
Vol 1010 ◽  
pp. 489-494
Author(s):  
Abdul Hafidz Yusoff ◽  
Rosmawani Mohammad ◽  
Mardawani Mohamad ◽  
Ahmad Ziad Sulaiman ◽  
Nurul Akmar Che Zaudin ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Adsorption Capacity ◽  
Metal Removal ◽  
Low Cost ◽  
Agricultural Waste ◽  
Heavy Metal Removal ◽  
Polluted Water ◽  
Maximum Adsorption Capacity ◽  
Pineapple Peel

Conventional methods to remove heavy metals from polluted water are expensive and not environmentally friendly. Therefore, this study was carried out to investigate the potential of agricultural waste such as pineapple peel (Ananas Cosmos) as low-cost absorbent to remove heavy metals from synthetic polluted water. The results showed that Cd, Cr and Pb were effectively removed by the biosorbent at 12g of pineapple peels in 100 mL solution. The optimum contact time for maximum adsorption was found to be 90 minutes, while the optimum pH for the heavy metal’s adsorption was 9. It was demonstrated that with the increase of adsorbent dosage, the percent of heavy metals removal was also increased due to the increasing adsorption capacity of the adsorbent. In addition, Langmuir model show maximum adsorption capacity of Cd is 1.91 mg/g. As conclusions, our findings show that pineapple peel has potential to remove heavy metal from polluted water.

scholarly journals Effective Biosorption of Nickel(II) from Aqueous Solutions UsingTrichoderma viride

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
P. Sujatha ◽  
V. Kalarani ◽  
B. Naresh Kumar
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Trichoderma Viride ◽  
Toxic Metal ◽  
Freundlich Isotherm ◽  
Recovery Process ◽  
Primary Objective ◽  
Ion Concentration ◽  
Isotherm Models

The primary objective of the present study is to evaluate the optimization conditions such as kinetic and equilibrium isotherm models involved in the removal of Ni(II) from the aqueous solutions byTrichoderma viride. The biosorbent was characterized by FTIR and SEM. The optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, initial metal ion concentration, and temperature. The maximum Ni(II) biosorption was obtained at pH 4.5. The equilibrium data were better fit by the Langmuir isotherm model than by the Freundlich isotherm. The kinetic studies indicate that the biosorption process of the metal ion Ni(II) has followed well the pseudo-second-order model. The sum of the square errors (SSE) and chi-square (χ2) tests were also carried out to find the best fit kinetic model and adsorption isotherm. The maximum biosorption capacity (qm) ofT.viridebiomass was found to be 47.6 mg/g for Ni(II) ion. Therefore, it can be concluded thatT.viridebiomass was effective and low-cost potential adsorbent to remove the toxic metal Ni(II) from aqueous solutions. The recovery process of Ni(II) fromT.viridebiomass was found to be higher than 98% by using 0.25 M HNO3. Besides the application of removal of toxic metal Ni(II) from aqueous solutions, the biosorbentT.viridecan be reused for five consecutive sorption-desorption cycles was determined.

Bioethanol production from pineapple peels waste by heat treatment and enzyme hydrolysis: An eco-friendly and economical method

2021 ◽  
Vol 16 (12) ◽  
pp. 64-71
Author(s):  
Jambulingam Kiruthika ◽  
A. Sathya ◽  
T. Sharvika
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Fossil Fuels ◽  
Bacterial Isolate ◽  
Potassium Dichromate ◽  
Low Cost ◽  
Enzymatic Saccharification ◽  
Enzyme Hydrolysis ◽  
Rdna Sequencing ◽  
Coimbatore District ◽  
Pineapple Peel

Bioethanol is a renewable energy source with reduced CO2 emission and a better alternate for fossil fuels. The production of bioethanol using low cost agricultural wastes such as fruits waste always remains a better solution for the present environmental and energy problems. The present study focusses on the production of bioethanol from pineapple peel wastes by simultaneous scarification and fermentation process in a completely eco-friendly manner and economical manner. The fruit wastes are rich sources of sugars and can be utilized for the production of second generation fuel. Initially, cellulase producing potent bacterial isolate was isolated from soil sample collected from fruit market (Uzhavar Santhai), R.S. Puram, Coimbatore district, Tamilnadu, India. Further, the bacterial isolate was identified by 16S rDNA sequencing and the sequence was submitted in GenBank with the accession number MW227436. The phylogenetic tree was constructed and the bacterial isolate was identified as Bacillus cereus strain JK79. Pineapple peel waste was processed, heat pretreated and was utilized for enzymatic saccharification with crude cellulase enzyme to hydrolyze cellulose into simple sugars. The enzyme hydrolyzed content was allowed to undergo fermentation simultaneously (Simultaneous saccharification and fermentation) utilizing Saccharomyces cerevisiae to produce bioethanol. The yield of bioethanol was determined by potassium dichromate method. About 10.07 g/l of bioethanol was obtained by fermenting the enzymatically hydrolyzed pineapple peel waste using Saccharomyces cerevisiae. The production of bioethanol was confirmed by GC-MS.

Comparison between Brazilian agro-wastes and activated carbon as adsorbents to remove Ni(II) from aqueous solutions

2016 ◽  
Vol 73 (11) ◽  
pp. 2713-2721 ◽  
Author(s):  
Guilherme Luiz Dotto ◽  
Lucas Meili ◽  
Ana Karla de Souza Abud ◽  
Eduardo Hiromitsu Tanabe ◽  
Daniel Assumpção Bertuol ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Low Cost ◽  
Orange Peel ◽  
Point Of Zero Charge ◽  
Equilibrium Studies ◽  
Factors Affecting ◽  
Op Amp ◽  
Batch Tests ◽  
Pineapple Peel ◽  
Equilibrium Data

This research was performed to find an alternative, low-cost, competitive, locally available and efficient adsorbent to treat nickel (Ni) containing effluents. For this purpose, several Brazilian agro-wastes like sugarcane bagasse (SCB), passion fruit wastes (PFW), orange peel (OP) and pineapple peel (PP) were compared with an activated carbon (AC). The adsorbents were characterized. Effects of fundamental factors affecting the adsorption were investigated using batch tests. Kinetic and equilibrium studies were performed using conventional models. It was verified that the adsorption was favored at pH of 6.0 for all agro-wastes, being dependent of the Ni speciation, point of zero charge and surface area of the adsorbents. The Ni removal percentage was in the following order: SCB > OP > AC > PFW > PP. From the kinetic viewpoint, the Elovich model was appropriate to fit the Ni adsorption onto SCB, while for the other adsorbents, the pseudo-first-order model was the most suitable. For all adsorbents, the Langmuir model was the more adequate to represent the equilibrium data, being the maximum adsorption capacities of 64.1 mg g−1, 60.7 mg g−1, 63.1 mg g−1, 48.1 mg g−1 and 64.3 mg g−1 for SCB, PFW, OP, PP and AC, respectively. These results indicated that mainly SCB and OP can be used as alternative adsorbents to treat Ni containing effluents.

Sign in / Sign up

Export Citation Format

Share Document