scholarly journals Consolidation of volcanic tuffs with TEOS and TMOS: a systematic study

2021 ◽  
Vol 81 (1) ◽  
Author(s):  
Christopher Pötzl ◽  
Stine Rucker ◽  
Eberhard Wendler ◽  
Siegfried Siegesmund
Keyword(s):  
Tartaric Acid ◽  
Clay Mineral ◽  
Silicic Acid ◽  
Systematic Study ◽  
Acid Ester ◽  
Mineral Content ◽  
Petrophysical Properties ◽  
Swelling Agent ◽  
Different Types ◽  
Before And After

AbstractIn this study, nine volcanic tuffs from Armenia, Germany and Mexico were treated with two commercially available consolidants on base of silicic acid ester, as well as different pretreatments with an anti-swelling agent and/or primer components. Prior to the treatment, the tuffs were analyzed regarding their petrography and mineralogy, with a greater focus on their clay mineral content. The effect of the consolidation was evaluated by comparative analyses of petrophysical properties and weathering behavior before and after the treatments. The main goals of this study were to identify a general suitability of different consolidating treatments for different types of tuff, evaluating tartaric acid as a primer component for tuff consolidation and to pursue the approach of finding a molecular answer for apparent tuff consolidation problematics, by testing a consolidation agent with smaller molecule sizes than current products on the market: tetramethoxysilane (TMOS).

Depositional Environment Drive as Overpressure Generation: Study Case in “Gap” Field, North West Java Basin

2020 ◽  
Author(s):  
A., C. Prasetyo
Keyword(s):  
Clay Mineral ◽  
Depositional Environment ◽  
Mineral Content ◽  
Hydrocarbon Generation ◽  
Well Test ◽  
Burial History ◽  
The South ◽  
North West ◽  
The North ◽  
Geological Processes

Overpressure existence represents a geological hazard; therefore, an accurate pore pressure prediction is critical for well planning and drilling procedures, etc. Overpressure is a geological phenomenon usually generated by two mechanisms, loading (disequilibrium compaction) and unloading mechanisms (diagenesis and hydrocarbon generation) and they are all geological processes. This research was conducted based on analytical and descriptive methods integrated with well data including wireline log, laboratory test and well test data. This research was conducted based on quantitative estimate of pore pressures using the Eaton Method. The stages are determining shale intervals with GR logs, calculating vertical stress/overburden stress values, determining normal compaction trends, making cross plots of sonic logs against density logs, calculating geothermal gradients, analyzing hydrocarbon maturity, and calculating sedimentation rates with burial history. The research conducted an analysis method on the distribution of clay mineral composition to determine depositional environment and its relationship to overpressure. The wells include GAP-01, GAP-02, GAP-03, and GAP-04 which has an overpressure zone range at depth 8501-10988 ft. The pressure value within the 4 wells has a range between 4358-7451 Psi. Overpressure mechanism in the GAP field is caused by non-loading mechanism (clay mineral diagenesis and hydrocarbon maturation). Overpressure distribution is controlled by its stratigraphy. Therefore, it is possible overpressure is spread quite broadly, especially in the low morphology of the “GAP” Field. This relates to the delta depositional environment with thick shale. Based on clay minerals distribution, the northern part (GAP 02 & 03) has more clay mineral content compared to the south and this can be interpreted increasingly towards sea (low energy regime) and facies turned into pro-delta. Overpressure might be found shallower in the north than the south due to higher clay mineral content present to the north.

scholarly journals Quality assessment of gas produced from different types of biomass pellets in gasification process

2019 ◽  
Vol 38 (2) ◽  
pp. 406-416 ◽  
Author(s):  
Marcel Mikeska ◽  
Jan Najser ◽  
Václav Peer ◽  
Jaroslav Frantík ◽  
Jan Kielar
Keyword(s):  
Gas Turbines ◽  
Combustion Engine ◽  
Calorific Value ◽  
Internal Combustion ◽  
Combustion Gas ◽  
Gas Cleaning ◽  
Gasification Process ◽  
Different Types ◽  
Before And After ◽  
Cleaning Technology

Gas from the gasification of pellets made from renewable sources of energy or from lower-quality fuels often contains a number of pollutants. This may cause technical difficulties during the gas use in internal combustion gas engines used for energy and heat cogeneration. Therefore, an adequate system of gas cleaning must be selected. In line with such requirements, this paper focuses on the characterization and comparison of gases produced from different types of biomass during gasification. The biomass tested was wood, straw, and hay pellets. The paper gives a detailed description and evaluation of the measurements from a fix-bed gasifier for the properties of the produced gases, raw fuels, tar composition, and its particle content before and after the cleaning process. The results of elemental composition, net calorific value, moisture, and ash content show that the cleaned gases are suitable for internal combustion engine-based cogeneration systems, but unsuitable for gas turbines, where a different cleaning technology would be needed.

scholarly journals Are the Acute Effects of THC Different in Aging Adults?

2021 ◽  
Vol 11 (5) ◽  
pp. 590
Author(s):  
Raeghan L. Mueller ◽  
Jarrod M. Ellingson ◽  
L. Cinnamon Bidwell ◽  
Angela D. Bryan ◽  
Kent E. Hutchison
Keyword(s):  
Older Adults ◽  
Young Adults ◽  
Age Groups ◽  
Young Group ◽  
Self Administration ◽  
Behavioral Measures ◽  
Younger Adults ◽  
Different Types ◽  
Before And After ◽  
Aging Adults

In recent years of expanding legalization, older adults have reported the largest increase in cannabis use of any age group. While its use has been studied extensively in young adults, little is known about the effects of THC in older adults and whether the risks of cannabis might be different, particularly concerning intoxication and cognition. The current study investigated whether age is associated with the deleterious effects of THC on cognitive performance and other behavioral measures before and after ad libitum self-administration of three different types of cannabis flower (THC dominant, THC + CBD, and CBD dominant). Age groups consisted of young adults (ages 21–25) and older adults (ages 55–70). Controlling for pre-use scores on all measures, the THC dominant chemovar produced a greater deleterious effect in younger adults compared with older adults in tests of learning and processing speed, whereas there were no differences between old and young in the effects of the other chemovars. In addition, the young group reported greater cannabis craving than the older group after using the THC chemovar. Consistent with some reports in the preclinical literature, the findings suggest that older adults may be less sensitive to the effects of THC on cognitive and affective measures.

Human mobility models reveal the underlying mechanism of seasonal movements across China

2021 ◽  
Author(s):  
Bing Song ◽  
Xiao-Yong Yan ◽  
Suoyi Tan ◽  
Bin Sai ◽  
Shengjie Lai ◽  
...  
Keyword(s):  
Traffic Engineering ◽  
Human Mobility ◽  
Underlying Mechanism ◽  
Gravity Models ◽  
Mobility Models ◽  
Temporal And Spatial Distribution ◽  
Population Movements ◽  
Different Types ◽  
Before And After ◽  
Time Periods

Understanding the spatial interactions of human mobility is crucial for urban planning, traffic engineering, as well as for the prevention and control of infectious diseases. Although many models have been developed to model human mobility, it is not clear whether such models could also capture the traveling mechanisms across different time periods (e.g. workdays, weekends or holidays). With one-year long nationwide location-based service (LBS) data in China, we investigate the spatiotemporal characteristics of population movements during different time periods, and make thorough comparisons for the applicability of five state-of-the-art human mobility models. We find that population flows show significant periodicity and strong inequality across temporal and spatial distribution. A strong “backflow” effect is found for cross-city movements before and after holidays. Parameter fitting of gravity models reveals that travels in different type of days consider the attractiveness of destinations and cost of distance differently. Surprisingly, the comparison indicates that the parameter-free opportunity priority selection (OPS) model outperforms other models and is the best to characterize human mobility in China across all six different types of days. However, there is still an urgent need for development of more dedicated models for human mobility on weekends and different types of holidays.

scholarly journals Comparative Analysis of Capabilities of Different Types of Cone-Beam Tomography in an Experimental Study of Root Canals of Teeth Filled with High-Density Materials (part 2)

2021 ◽  
pp. 51-61
Author(s):  
A. Yu. Vasil'ev ◽  
V. V. Petrovskaya ◽  
E. A. Nichipor ◽  
V. G. Alpatova ◽  
N. N. Potrakhov ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Experimental Study ◽  
Cone Beam Computed Tomography ◽  
Comparative Assessment ◽  
High Density ◽  
Cone Beam ◽  
Root Canals ◽  
Different Types ◽  
Before And After ◽  
Cone Beam Tomography

During the course of this experimental study tomograms of extracted teeth were analyzed before and after filling the root canals with an endodontic material and fragments of broken metal instruments for root canal treatment. During the first stage of the experiment, untreated extracted teeth were scanned using conebeam computed tomography and microfocus cone-beam computed tomography. A comparative assessment of capabilities of the two methods of cone-beam computed tomography based on examination of untreated root canals was carried out. The second part of the study is dedicated to visualization of root canals that contain foreign high-density materials.

scholarly journals Do NiTi Instruments show Defects before Separation? Defects caused by Torsional Fatigue in Hand and Rotary Nickel-Titanium (NiTi) Instruments which Lead to Failure during Clinical Use

2012 ◽  
Vol 13 (6) ◽  
pp. 867-872 ◽  
Author(s):  
Sudhir Kumar ◽  
P Ratnakar ◽  
NV Murali Krishna Chakka ◽  
Sanjib Das ◽  
Anandamy Bagchi ◽  
...  
Keyword(s):  
Nickel Titanium ◽  
Clinical Use ◽  
New Classification ◽  
Torsional Fatigue ◽  
Anterior Teeth ◽  
Microscopic Evaluation ◽  
Different Types ◽  
Before And After ◽  
The Difference ◽  
Niti Instruments

ABSTRACT Aims Visual and microscopic evaluation of defects caused by torsional fatigue in hand and rotary nickel titanium (NiTi) instruments. Materials and methods Ninety-six NiTi greater taper instruments which were routinely used for root canal treatment only in anterior teeth were selected for the study. The files taken include ProTaper for hand use, ProTaper Rotary files and Endowave rotary files. After every use, the files were observed visually and microscopically (Stereomicroscope at 10×) to evaluate the defects caused by torsional fatigue. Scoring was given according to a new classification formulated which gives an indication of the severity of the defect or damage. Statistical analysis Data was statistically analyzed using KruskallWallis and Mann-Whitney U test. Results Number of files showing defects were more under stereomicroscope than visual examination. But, the difference in the evaluation methods was not statistically significant. The different types of defects observed were bent instrument, straightening/stretching of twist contour and partial reverse twisting. Endowave files showed maximum number of defects followed by ProTaper for hand use and least in ProTaper Rotary. Conclusion Visible defects due to torsional fatigue do occur in NiTi instruments after clinical use. Both visual and microscopic examinations were efficient in detecting defects caused due to torsional fatigue. This study emphasizes that all files should be observed for any visible defects before and after every instrumentation cycle to minimize the risk of instrument separation and failure of endodontic therapy. How to cite this article Chakka NVMK, Ratnakar P, Das S, Bagchi A, Kumar S, Anumula L. Do NiTi Instruments show Defects before Separation? Defects caused by Torsional Fatigue in Hand and Rotary Nickel-Titanium (NiTi) Instruments which Lead to Failure during Clinical Use. J Contemp Dent Pract 2012;13(6):867-872.

scholarly journals Performance of Flexible Chemoresistive Gas Sensors after Having Undergone Automated Bending Tests

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5190 ◽  
Author(s):  
Miriam Alvarado ◽  
Silvia De La Flor ◽  
Eduard Llobet ◽  
Alfonso Romero ◽  
José Luis Ramírez
Keyword(s):  
Metal Oxide ◽  
Gas Sensing ◽  
Flexible Substrate ◽  
Test Procedure ◽  
Chemical Vapor ◽  
Bending Test ◽  
Bending Tests ◽  
Ag Electrodes ◽  
Different Types ◽  
Before And After

Many sensors are developed over flexible substrates to be used as wearables, which does not guarantee that they will actually withstand being bent. This work evaluates the gas sensing performance of metal oxide devices of three different types, before and after having undergone automated, repetitive bending tests. These tests were aimed at demonstrating that the fabricated sensors were actually flexible, which cannot be taken for granted beforehand. The active layer in these sensors consisted of WO3 nanowires (NWs) grown directly over a Kapton foil by means of the aerosol-assisted chemical vapor deposition. Their response to different H2 concentrations was measured at first. Then, they were cyclically bent, and finally, their response to H2 was measured again. Sensors based on pristine WO3-NWs over Ag electrodes and on Pd-decorated NWs over Au electrodes maintained their performance after having been bent. Ag electrodes covered with Pd-decorated NWs became fragile and lost their usefulness. To summarize, two different types of truly flexible metal oxide gas sensor were fabricated, whereas a third one was not flexible, despite being grown over a flexible substrate following the same method. Finally, we recommend that one standard bending test procedure should be established to clearly determine the flexibility of a sensor considering its intended application.

Sign in / Sign up

Export Citation Format

Share Document