scholarly journals Computation of Rayleigh damping coefficient of a rectangular submerged floating tunnel (SFT)

2020 ◽  
Vol 2 (5) ◽  
Author(s):  
Md. Hafizur Rahman ◽  
Chhavi Gupta
Keyword(s):  
Dynamic Analysis ◽  
Modal Analysis ◽  
Fundamental Frequency ◽  
Significant Role ◽  
Analytical Study ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Damping Coefficients ◽  
Rayleigh Damping ◽  
Submerged Floating Tunnel

Abstract The dynamic behaviors of the submerged floating tunnel, a buoyant structure of high slenderness, are a matter of concern since it is surrounded by the huge hazardous effects called hydrodynamic, seismic and functional action. Modal analysis and Rayleigh damping coefficients play a significant role in dynamic analysis, but it is not sufficiently simple to predict the reasonable damping coefficients named α and β. The present paper outlines the modal analysis and the calculation of Rayleigh damping coefficients that provide the natural frequencies, mode shapes, mode’s motion as well as coefficients α and β. To compute the Rayleigh damping coefficients, 2–10% damping to the critical damping has been assumed for this analytical study. For the analysis, an FEA-based software ANSYS is utilized successfully. It has been seen that the fundamental frequency and Rayleigh damping coefficients (α = 0.946 and β = 0.00022) of the SFT are reasonably high and it is under noticeable damping.

scholarly journals Rayleigh Damping Coefficients of Laminated Rubber Bearing

2019 ◽  
Vol 8 (4) ◽  
pp. 12294-12300
Keyword(s):  
Finite Element ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Experimental Modal Analysis ◽  
Mode Shapes ◽  
Ground Structure ◽  
Damping Coefficients ◽  
Rubber Bearing ◽  
Stability And Instability ◽  
Laminated Rubber Bearing

In isolating the ground structure and the above ground structure from seismic loads, a significant device called laminated rubber bearing is usually found in structure. The complexity of the material which is made up from a combination of rubber and steel shim plates in alternate layer, has made it difficult to measure damping value. Damping is a dissipation of energy or energy losses in the vibration of the structure. Measuring the accurate amount of damping is fundamental as damping plays a crucial role in fixing the borderline between stability and instability in structural systems. Therefore, to determine the damping value including dynamic properties in any materials, modal analysis can be used. Hence, the main objective of this research is to determine the Rayleigh’s damping coefficients α and β and to evaluate the performance of the laminated rubber bearing using finite element and experimental modal analysis. Finding shows that, the finite element modal analysis with the addition of Rayleigh’s damping coefficients α and β, shows a good agreement with the experimental modal analysis in term of natural frequencies and mode shapes. Findings show that, the values of natural frequencies reduced when precise Rayleigh’s damping coefficient added in the finite element modal analysis. It can be concluded that both finite element and experimental modal analysis method can be used to estimate the accurate values of damping ratio and to determine the Rayleigh’s damping coefficients α and β as well.

Dynamic Properties of a Heliostat Structure Determined by Numerical and Experimental Modal Analysis

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
J. Felipe Vásquez-Arango ◽  
Reiner Buck ◽  
Robert Pitz-Paal
Keyword(s):  
Modal Analysis ◽  
Vortex Shedding ◽  
Natural Frequencies ◽  
Dynamic Properties ◽  
Simple Approach ◽  
Operating Conditions ◽  
Mode Shapes ◽  
Fe Model ◽  
Damping Coefficients ◽  
Operating Points

An experimental and numerical modal analysis was performed on an 8 m2 T-shaped heliostat structure at different elevation angles. The experimental results were used to validate a finite element (FE) model by comparing natural frequencies and mode shapes. The agreement between experiments and simulations is good in all operating points investigated. In addition, damping coefficients were determined experimentally for each mode, in order to provide all necessary information for the development of a dynamic model. Furthermore, potentially critical operating conditions caused by vortex shedding were identified using a simple approach.

Dynamic Characteristics Analysis of the Mud Transfer Pump Rotor

2013 ◽  
Vol 455 ◽  
pp. 248-252
Author(s):  
Jun Yuan Sun ◽  
Ji Ming Xiao
Keyword(s):  
Dynamic Analysis ◽  
Modal Analysis ◽  
Dynamic Characteristics ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Dam Construction ◽  
Pump Rotor ◽  
Characteristics Analysis ◽  
Rotor Dynamic ◽  
Dynamic Characteristics Analysis

The mud pump damming technology is a new idea put forward for realization of mechanization and automation of warping dam construction. A mud pump damming machine is studied, the FEM of the mud transfer pump rotor is built, modal analysis and rotor-dynamic analysis are carried out, natural frequencies and mode shapes under different constraints are obtained and the critical speeds of the pump rotor are determined, which will provide reference to improve the running reliability of the mud transfer pump rotor.

Modal Analysis as the Base of Dynamic Analysis

2015 ◽  
Vol 798 ◽  
pp. 148-152
Author(s):  
Katarina Monkova ◽  
Peter Monka ◽  
Andrea Cizikova ◽  
Filip Murgas ◽  
Jan Rehor ◽  
...  
Keyword(s):  
Dynamic Analysis ◽  
Modal Analysis ◽  
Numerical Method ◽  
Tool Life ◽  
Cutting Tool ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Experimental Measurements ◽  
Life Analysis ◽  
Fixed Beam

The article deals with the modal analysis as a tool for specification of natural frequencies and the mode shapes of the turning tool. This type of analysis is the first step that is necessary to do at the dynamic analysis of technical components. At the beginning, the verification of numerical method was realized in laboratory conditions, where the fixed beam substituted the turning tool. Vibrodiagnostics of the real cutting tool in the workshop and the modal analysis using FEM in the software PTC Creo followed. It can be said that the results of the numerical method based on FEM were comparable with the data achieved by means of experimental measurements. The work described in this paper can be considered as a foundation for the dynamic tool life analysis.

scholarly journals Modal analysis of an iced offshore composite wind turbine blade

2021 ◽  
pp. 0309524X2110116
Author(s):  
Oumnia Lagdani ◽  
Mostapha Tarfaoui ◽  
Mourad Nachtane ◽  
Mourad Trihi ◽  
Houda Laaouidi
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Turbine Blade ◽  
Natural Frequencies ◽  
Wind Turbine Blade ◽  
Resonance Phenomenon ◽  
Mode Shapes ◽  
The Finite Element Method ◽  
Numerical Work ◽  
Composite Blades

In the far north, low temperatures and atmospheric icing are a major danger for the safe operation of wind turbines. It can cause several problems in fatigue loads, the balance of the rotor and aerodynamics. With the aim of improving the rigidity of the wind turbine blade, composite materials are currently being used. A numerical work aims to evaluate the effect of ice on composite blades and to determine the most adequate material under icing conditions. Different ice thicknesses are considered in the lower part of the blade. In this paper, modal analysis is performed to obtain the natural frequencies and corresponding mode shapes of the structure. This analysis is elaborated using the finite element method (FEM) computer program through ABAQUS software. The results have laid that the natural frequencies of the blade varied according to the material and thickness of ice and that there is no resonance phenomenon.

scholarly journals Dynamics Characteristics of Blast Furnace Shell

2011 ◽  
Vol 2-3 ◽  
pp. 1018-1020
Author(s):  
De Chen Zhang ◽  
Yan Ping Sun
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Blast Furnace ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Theoretical Foundation ◽  
Structural Mechanics ◽  
Mode Shapes ◽  
The Future ◽  
Element Method

Finite element method and structural mechanics method are used to study the blast furnace shell modal analysis and the natural frequencies and mode shapes have been calculated. The two methods were compared and validated , and the results provide a theoretical foundation for the anti-vibration capabilities design of blast furnace shell in the future .

scholarly journals Modelling of the Coupled Beam-Piezoelectric Material With Hysteresis Non-Linerity Effect

2018 ◽  
Vol 217 ◽  
pp. 02001
Author(s):  
Mohd Hafiz Abdul Satar ◽  
Ahmad Zhafran Ahmad Mazlan
Keyword(s):  
Modal Analysis ◽  
Piezoelectric Material ◽  
Piezoelectric Actuator ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Stress And Strain ◽  
Sinusoidal Voltage ◽  
Correction Algorithm ◽  
Beam Structure ◽  
Piezoelectric Patch

Hysteresis is one of the non-linearity characteristics of the piezoelectric material. This characteristic is important to be characterized since it can affect the performance of the piezoelectric material as sensor or actuator in many applications. In this study, the model of the coupled aluminium beam with single piezoelectric patch material is constructed to investigate the hysteresis effect of the piezoelectric material to the whole beam structure. A P-876 DuraActTM type piezoelectric patch material is used in modelling of the piezoelectric actuator. Firstly, the modal analysis of the coupled beam-piezoelectric actuator is determined to get the natural frequencies and mode shapes. Then, the piezoelectric patch material is investigated in terms of actuator by given a sinusoidal voltage excitation and output in terms of deflection, stress and strain of the piezoelectric actuator are investigated. From the results, it is clear that, the coupled beam-piezoelectric material is affected by the hysteresis of the piezoelectric material and the natural frequencies of the beam structure. This characteristic is important for the piezoelectric actuator manufacturer and by providing the correction algorithm, it can improve the performance of the piezoelectric actuator for many applications.

scholarly journals Aerodynamics and Modal Analysis for the Combined Vane type Vertical Axis Wind Turbine

2018 ◽  
Vol 7 (4.38) ◽  
pp. 1395 ◽  
Author(s):  
Kadhim H. Suffer ◽  
Yassr Y. Kahtan ◽  
Zuradzman M. Razlan
Keyword(s):  
Wind Turbine ◽  
Modal Analysis ◽  
Natural Frequencies ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Mode Shapes ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Starting Torque

The present global energy economy suggests the use of renewable sources such as solar, wind, and biomass to produce the required power. The vertical axis wind turbine is one of wind power applications. Usually, when the vertical axis wind turbine blades are designed from the airfoil, the starting torque problem begins. The main objective of this research is to numerically simulate the combination of movable vanes of a flat plate with the airfoil in a single blade configuration to solve the starting torque problem. CFD analysis in ANSYS-FLUENT and structural analysis in ANSYS of combined blade vertical axis wind turbine rotor has been undertaken. The first simulation is carried out to investigations the aerodynamic characteristic of the turbine by using the finite volume method. While the second simulation is carried out with finite element method for the modal analysis to find the natural frequencies and the mode shape in order to avoid extreme vibration and turbine failure, the natural frequencies, and their corresponding mode shapes are studied and the results were presented with damping and without damping for four selected cases. The predicted results show that the static pressure drop across the blade increase in the active blade side because of the vanes are fully closed and decrease in the negative side because of the all the vanes are fully open. The combined blade helps to increase turbine rotation and so, thus, the power of the turbine increases. While the modal results show that until the 5th natural frequency the effect of damping can be neglected. The predicted results show agreement with those reported in the literature for VAWT with different blade designs.   

Modal Analysis of Magnetic Resonance Imaging (MRI) Scanner Support Structure

2018 ◽  
Author(s):  
Geneviève Rodrigue ◽  
Chris K. Mechefske
Keyword(s):  
Modal Analysis ◽  
Vibration Isolation ◽  
Natural Frequencies ◽  
Design Tool ◽  
Mode Shapes ◽  
Resonance Imaging ◽  
Support Structure ◽  
Analysis And Design ◽  
Passive Vibration Isolation ◽  
Magnetic Resonance Imaging Mri

Experimental and computational modal analysis has been completed as part of a larger project with the ultimate goal of understanding MRI vibration and implementing passive vibration isolation in the MRI machine support structure. The specific purpose of the modal analysis is to extract natural frequencies (eigenvalues) and mode shapes (eigenvectors) of the MRI support structure in order to validate the computational model of the base against the experimental results so that the former may be used as an analysis and design tool. From the model, the resonance points of the MRI support structure are determined within the expected frequency ranges of excitation.

Sign in / Sign up

Export Citation Format

Share Document