Effect of kneading and carbonization temperature on the structure of the carbon block for thermally conductive bulk graphites

2021 ◽  
Author(s):  
Donghae An ◽  
Kyung Hoon Kim ◽  
Chaehun Lim ◽  
Young-Seak Lee
Keyword(s):  
Carbonization Temperature ◽  
Carbon Block ◽  
Thermally Conductive

Electron behavior in the gaseous environment of the ESEM chamber

1996 ◽  
Vol 54 ◽  
pp. 838-839 ◽  
Author(s):  
S.A. Wight
Keyword(s):  
Secondary Electron ◽  
High Vacuum ◽  
Beam Current ◽  
Chamber Pressure ◽  
Environmental Scanning ◽  
Carbon Block ◽  
Faraday Cup ◽  
X Ray ◽  
Gaseous Environment ◽  
Working Distance

Measurements of electrons striking the sample in the Environmental Scanning Electron Microscope (ESEM) are needed to begin to understand the effect of the presence of the gas on analytical measurements. Accurate beam current is important to x-ray microanalysis and it is typically measured with a faraday cup. A faraday cup (Figure 1) was constructed from a carbon block embedded in non-conductive epoxy with a 45 micrometer bore platinum aperture over the hole. Currents were measured with an electrometer and recorded as instrument parameters were varied.Instrument parameters investigated included working distance, chamber pressure, condenser percentage, and accelerating voltage. The conditions studied were low vacuum with gaseous secondary electron detector (GSED) voltage on; low vacuum with GSED voltage off; and high vacuum (GSED off). The base conditions were 30 kV, 667 Pa (5 Torr) water vapor, 100,000x magnification with the beam centered inside aperture, GSED voltage at 370 VDC, condenser at 50%, and working distance at 19.5 mm. All modifications of instrument parameters were made from these conditions.

Highly thermally conductive graphene-based electrodes for supercapacitors with excellent heat dissipation ability

2017 ◽  
Vol 1 (10) ◽  
pp. 2145-2154 ◽  
Author(s):  
Bo Zhao ◽  
Xian-Zhu Fu ◽  
Rong Sun ◽  
Ching-Ping Wong
Keyword(s):  
Heat Dissipation ◽  
Cycling Performance ◽  
Thermally Conductive ◽  
Rate Capacity ◽  
Electrodes For Supercapacitors

The highly thermally conductive graphene-based electrodes for supercapacitors exhibit great heat dissipation ability as well as excellent cycling performance and rate capacity.

Highly thermally conductive UHMWPE/NG composites with the segregated structure and their application for heat spreader

2020 ◽  
pp. 089270572096564
Author(s):  
Xiao Wang ◽  
Hui Lu ◽  
Jun Chen
Keyword(s):  
Thermal Conductivity ◽  
Laser Flash ◽  
Heating Process ◽  
X Ray Diffraction ◽  
Heat Spreader ◽  
Conductive Composites ◽  
Compression Direction ◽  
Thermal Analyzer ◽  
Thermally Conductive ◽  
Plane Direction

In this work, ultra-high molecular weight polyethylene (UHMWPE)/natural flake graphite (NG) polymer composites with the extraordinary high thermal conductivity were prepared by a facile mixed-heating powder method. Morphology observation and X-ray diffraction (XRD) tests revealed that the NG flakes could be more tightly coated on the surface of UHMWPE granules by mixed-heating process and align horizontally (perpendicular to the hot compression direction of composites). Laser flash thermal analyzer (LFA) demonstrated that the thermal conductivity (TC) of composites with 21.6 vol% of NG reached 19.87 W/(m·K) and 10.67 W/(m·K) in the in-plane and through-plane direction, respectively. Application experiment further demonstrated that UHMWPE/NG composites had strong capability to dissipate the heat as heat spreader. The obtained results provided a valuable basis for fabricating high thermal conductive composites which can act as advanced thermal management materials.

Thermally conductive ultra-low-k dielectric layers based on two-dimensional covalent organic frameworks

2021 ◽  
Author(s):  
Austin M. Evans ◽  
Ashutosh Giri ◽  
Vinod K. Sangwan ◽  
Sangni Xun ◽  
Matthew Bartnof ◽  
...  
Keyword(s):  
Two Dimensional ◽  
Covalent Organic Frameworks ◽  
Dielectric Layers ◽  
Thermally Conductive ◽  
Low K

Highly thermally conductive and eco-friendly OH-h-BN/chitosan nanocomposites by constructing a honeycomb thermal network

2021 ◽  
Vol 266 ◽  
pp. 118127
Author(s):  
Qian Zou ◽  
Si-wei Xiong ◽  
Meng-ying Jiang ◽  
Li-ye Chen ◽  
Ke Zheng ◽  
...  
Keyword(s):  
Thermal Network ◽  
Thermally Conductive

scholarly journals Enhancement of the Thermal Performance of the Paraffin-Based Microcapsules Intended for Textile Applications

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1120
Author(s):  
Virginija Skurkyte-Papieviene ◽  
Ausra Abraitiene ◽  
Audrone Sankauskaite ◽  
Vitalija Rubeziene ◽  
Julija Baltusnikaite-Guzaitiene
Keyword(s):  
Thermal Conductivity ◽  
Thermal Performance ◽  
Comparative Method ◽  
Multiwall Carbon Nanotubes ◽  
Acrylic Resin ◽  
Positive Influence ◽  
Outer Shell ◽  
Ir Camera ◽  
Spacer Fabric ◽  
Thermally Conductive

Phase changing materials (PCMs) microcapsules MPCM32D, consisting of a polymeric melamine-formaldehyde (MF) resin shell surrounding a paraffin core (melting point: 30–32 °C), have been modified by introducing thermally conductive additives on their outer shell surface. As additives, multiwall carbon nanotubes (MWCNTs) and poly (3,4-ethylenedioxyoxythiophene) poly (styrene sulphonate) (PEDOT: PSS) were used in different parts by weight (1 wt.%, 5 wt.%, and 10 wt.%). The main aim of this modification—to enhance the thermal performance of the microencapsulated PCMs intended for textile applications. The morphologic analysis of the newly formed coating of MWCNTs or PEDOT: PSS microcapsules shell was observed by SEM. The heat storage and release capacity were evaluated by changing microcapsules MPCM32D shell modification. In order to evaluate the influence of the modified MF outer shell on the thermal properties of paraffin PCM, a thermal conductivity coefficient (λ) of these unmodified and shell-modified microcapsules was also measured by the comparative method. Based on the identified optimal parameters of the thermal performance of the tested PCM microcapsules, a 3D warp-knitted spacer fabric from PET was treated with a composition containing 5 wt.% MWCNTs or 5 wt.% PEDOT: PSS shell-modified microcapsules MPCM32D and acrylic resin binder. To assess the dynamic thermal behaviour of the treated fabric samples, an IR heating source and IR camera were used. The fabric with 5 wt.% MWCNTs or 5 wt.% PEDOT: PSS in shell-modified paraffin microcapsules MPCM32D revealed much faster heating and significantly slower cooling compared to the fabric treated with the unmodified ones. The thermal conductivity of the investigated fabric samples with modified microcapsules MPCM32D has been improved in comparison to the fabric samples with unmodified ones. That confirms the positive influence of using thermally conductive enhancing additives for the heat transfer rate within the textile sample containing these modified paraffin PCM microcapsules.

Sign in / Sign up

Export Citation Format

Share Document