Meta-stable changes in the output characteristics of high-voltage amorphous silicon thin-film transistors

1989 ◽  
Vol 115 (1-3) ◽  
pp. 141-143 ◽  
Author(s):  
John G. Shaw ◽  
Mike Hack ◽  
Russel A. Martin
1991 ◽  
Vol 69 (4) ◽  
pp. 2667-2672 ◽  
Author(s):  
John G. Shaw ◽  
Michael G. Hack ◽  
Russel A. Martin

1993 ◽  
Vol 40 (3) ◽  
pp. 634-644 ◽  
Author(s):  
R.A. Martin ◽  
V.M. Da Costa ◽  
M. Hack ◽  
J.G. Shaw

1996 ◽  
Vol 424 ◽  
Author(s):  
A. M. Miri ◽  
P. S. Gudem ◽  
S. G. Chamberlain ◽  
A. Nathan

AbstractConventional high voltage thin-film transistors (HVTFTs) suffer from performance limitations such as low on-current, Vx, shift and large curvature in the linear region of the output characteristics. These limitations are associated with the highly resistive dead region in conventional HVTFT structures. In this paper, we present a novel TFT structure which has a high on-current, improved output characteristics in the linear region, and no Vx shift. The higher on-current and significant improvement in output characteristics allows faster switching. Elimination of the Vx shift leads to more reliable circuit operation. The new structure is based on the conventional low voltage TFT (LVTFT) structure except that it does not suffer from low-voltage breakdown. The low-voltage breakdown of the gate nitride in conventional LVTFTs is perceived to be due to spiking of the drain metallization into the underlying layers which creates regions of very high electric field. In our novel structure, a higher breakdown is achieved by locating the metal contacts away from the gate edge while keeping the necessary drain to gate overlap through a heavily doped microcrystalline layer. Therefore, the new TFT extends the same performance as LVTFTs to high voltage operation. Furthermore, this structure also enhances the yield and reliability by minimizing the common faults in TFTs such as short circuits between gate, source and drain.


1996 ◽  
Vol 420 ◽  
Author(s):  
A. M. Miri ◽  
P. S. Gudem ◽  
S. G. Chamberlain ◽  
A. Nathan

AbstractConventional high voltage thin-film transistors (HVTFTs) suffer from performance limitations such as low on-current, Vx. shift and large curvature in the linear region of the output characteristics. These limitations are associated with the highly resistive dead region in conventional HVTFT structures. In this paper, we present a novel TFT structure which has a high on-current, improved output characteristics in the linear region, and no Vx, shift. The higher on-current and significant improvement in output characteristics allows faster switching. Elimination of the Vx shift leads to more reliable circuit operation. The new structure is based on the conventional low voltage TFT (LVTFT) structure except that it does not suffer from low-voltage breakdown. The low-voltage breakdown of the gate nitride in conventional LVTFTs is perceived to be due to spiking of the drain metallization into the underlying layers which creates regions of very high electric field. In our novel structure, a higher breakdown is achieved by locating the metal contacts away from the gate edge while keeping the necessary drain to gate overlap through a heavily doped microcrystalline layer. Therefore, the new TFT extends the same performance as LVTFTs to high voltage operation. Furthermore, this structure also enhances the yield and reliability by minimizing the common faults in TFTs such as short circuits between gate, source and drain.


1990 ◽  
Vol 192 ◽  
Author(s):  
M. Hack ◽  
W. B. Jackson ◽  
R. Lujan

ABSTRACTWe have developed a means to speed up the recovery of both the threshold voltage shift of hydrogenated amorphous silicon (a-Si:H) transistors and the Vx shift of high voltage a-Si devices. This is accomplished by placing a lightly doped compensated layer adjacent to the active layer in these transistors. This proximity recovery layer does not alter the initial characteristics of a-Si:H transistors and is completely process compatible with standard fabrication procedures.


2000 ◽  
Vol 621 ◽  
Author(s):  
N. Tosic ◽  
F. G. Kuper ◽  
T. Mouthaan

ABSTRACTIn this paper, an analysis of the high voltage induced degradation in top gate amorphous silicon Thin Film Transistors (TFT) will be shown, including the aspect of self-heating. It will be shown through experimental results that the degradation level under high voltages on drain and gate is different for TFT's with different channel lengths. In addition, the temperature distribution over the TFT area for devices with different channel length is simulated. Simulation shows that the peak of temperature distribution is located at the drain/channel edge and that level of thermal heating depends on the channel length.


1997 ◽  
Vol 36 (Part 1, No. 10) ◽  
pp. 6226-6229 ◽  
Author(s):  
Huang-Chung Cheng ◽  
Jun-Wei Tsai ◽  
Chun-Yao Huang ◽  
Fang-Chen Luo ◽  
Hsing-Chien Tuan

1996 ◽  
Vol 424 ◽  
Author(s):  
R. E. I. Schropp ◽  
K. F. Feenstra ◽  
C. H. M. Van Der Werf ◽  
J. Holleman ◽  
H. Meiling

AbstractWe present the first thin film transistors (TFTs) incorporating a low hydrogen content (5 - 9 at.-%) amorphous silicon (a-Si:H) layer deposited by the Hot-Wire Chemical Vapor Deposition (HWCVD) technique. This demonstrates the possibility of utilizing this material in devices. The deposition rate by Hot-Wire CVD is an order of magnitude higher than by Plasma Enhanced CVD. The switching ratio for TFTs based on HWCVD a-Si:H is better than 5 orders of magnitude. The field-effect mobility as determined from the saturation regime of the transfer characteristics is still quite poor. The interface with the gate dielectric needs further optimization. Current crowding effects, however, could be completely eliminated by a H2 plasma treatment of the HW-deposited intrinsic layer. In contrast to the PECVD reference device, the HWCVD device appears to be almost unsensitive to bias voltage stressing. This shows that HW-deposited material might be an approach to much more stable devices.


2009 ◽  
Vol 105 (12) ◽  
pp. 124504 ◽  
Author(s):  
S. L. Rumyantsev ◽  
Sung Hun Jin ◽  
M. S. Shur ◽  
Mun-Soo Park

Sign in / Sign up

Export Citation Format

Share Document