NUCLEAR POWER AND ‘UNCONVENTIONAL’ ENERGY SOURCES: CANADA, THE PAST, PRESENT AND FUTURE

Author(s):  
Derek O. Northwood
Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.


MRS Bulletin ◽  
2008 ◽  
Vol 33 (4) ◽  
pp. 340-342 ◽  
Author(s):  
Siegfried S. Hecker

Raj et al. describe the promise of nuclear energy as a sustainable, affordable, and carbon-free source available this century on a scale that can help meet the world's growing need for energy and help slow the pace of global climate change. However, the factor of millions gain in energy release from nuclear fssion compared to all conventional energy sources that tap the energy of electrons (Figure 1) has also been used to create explosives of unprecedented lethality and, hence, poses a serious challenge to the expansion of nuclear energy worldwide. Although the end of the cold war has eliminated the threat of annihilating humanity, the likelihood of a devastating nuclear attack has increased as more nations, subnational groups, and terrorists seek to acquire nuclear weapons.


Author(s):  
Kau-Fui Vincent Wong ◽  
Guillermo Amador

As society continues advancing into the future, more energy is required to supply the increasing population and energy demands. Unfortunately, traditional forms of energy production through the burning of carbon-based fuels are dumping harmful pollutants into the environment, resulting in detrimental, and possibly irreversible, effects on our planet. The burning of coal and fossil fuels provides energy at the least monetary cost for countries like the US, but the price being paid through their negative impact of our atmosphere is difficult to quantify. A rapid shift to clean, alternative energy sources is critical in order to reduce the amount of greenhouse gas emissions. For alternative energy sources to replace traditional energy sources that produce greenhouse gases, they must be capable of providing energy at equal or greater rates and efficiencies, while still functioning at competitive prices. The main factors hindering the pursuit of alternative sources are their high initial costs and, for some, intermittency. The creation of electrical energy from natural sources like wind, water, and solar is very desirable since it produces no greenhouse gases and makes use of renewable sources—unlike fossil fuels. However, the planning and technology required to tap into these sources and transfer energy at the rate and consistency needed to supply our society comes at a higher price than traditional methods. These high costs are a result of the large-scale implementation of the state-of-the-art technologies behind the devices required for energy cultivation and delivery from these unorthodox sources. On the other hand, as fossil fuel sources become scarcer, the rising fuel costs drive overall costs up and make traditional methods less cost effective. The growing scarcity of fossil fuels and resulting pollutants stimulate the necessity to transition away from traditional energy production methods. Currently, the most common alternative energy technologies are solar photovoltaics (PVs), concentrated solar power (CSP), wind, hydroelectric, geothermal, tidal, wave, and nuclear. Because of government intervention in countries like the US and the absence of the need to restructure the electricity transmission system (due to the similarity in geographical requirements and consistency in power outputs for nuclear and traditional plants), nuclear energy is the most cost competitive energy technology that does not produce greenhouse gases. Through the proper use of nuclear fission electricity at high efficiencies could be produced without polluting our atmosphere. However, the initial capital required to erect nuclear plants dictates a higher cost over traditional methods. Therefore, the government is providing help with the high initial costs through loan guarantees, in order to stimulate the growth of low-emission energy production. This paper analyzes the proposal for the use of nuclear power as an intermediate step before an eventual transition to greater dependence on energy from wind, water, and solar (WWS) sources. Complete dependence on WWS cannot be achieved in the near future, within 20 years, because of the unavoidable variability of these sources and the required overhaul of the electricity transmission system. Therefore, we look to nuclear power in the time being to help provide predictable power as a means to reduce carbon emissions, while the other technologies are refined and gradually implemented in order to meet energy demand on a consistent basis.


i-com ◽  
2015 ◽  
Vol 14 (3) ◽  
Author(s):  
Raquel Oliveira ◽  
Sophie Dupuy-Chessa ◽  
Gaëlle Calvary

AbstractInteractive systems have largely evolved over the past years. Nowadays, different users can interact with systems on different devices and in different environments. The user interfaces (UIs) are expected to cope with such variety. Plastic UIs have the capacity to adapt to changes in their context of use while preserving usability. Such capability enhances UIs, however, it adds complexity on them. We propose an approach to verifying interactive systems considering this adaptation capability of the UIs. The approach applies two formal techniques: model checking, to the verification of properties over the system model, and equivalence checking, to compare different versions of a UI, thereby identifying different levels of UI equivalence. We apply the approach to a case study in the nuclear power plant domain in which several UI are analyzed, properties are verified, and the level of equivalence between them is demonstrated.


Author(s):  
V. V. Shevchenko ◽  
A. N. Minko ◽  
M. Dimov

The paper defines the directions of improving turbogenerators as the basis for ensuring the energy independence of Ukraine. The analysis of the state, problems and prospects for the development of modern electric power industry. Goal of the work is to identify promising directions for sustainable development of the national electric power industry in order to ensure energy security of Ukraine, to conduct a comparative analysis of electricity sources, to confirm the need to improve the main sources – turbogenerators. Methodology. During the research, an analytical analysis of the electricity sources, which are installed at power plants in Ukraine and the world, was carried out, taking into account the growth of the planet's population and its energy activity. Cyclic theory was chosen as the theoretical basis for forecasting. On the basis of this theory, global development trends, advantages and disadvantages of currently used sources of electricity - thermal (including nuclear) power plants and stations that operate from renewable energy sources - have been established. A review of literary sources on the methods of the energy sector forecasting the development, including the development of the energy sector in Ukraine, has been carried out. Originality. It has been established that due to the active growth of the planet's population, with the increase in its energy activity, obtaining electricity from renewable energy sources is not enough, that for the next 20-30 years nuclear power plants will be the main sources of electricity. The internal and external threats to the energy security of Ukraine, directions of development of turbogenerator construction, ways to improve turbogenerators, to increase their energy efficiency, power per unit of performance, to increase the readiness and maneuverability factors, and overload capacity have been identified. Practical significance. The need to continue the modernization and improvement of the turbogenerators of nuclear power plant units, as the main sources of electricity, has been proved. The directions of their improvement are established: increasing the power in the established sizes, making changes to the design of the turbogenerators inactive elements, replacing the cooling agent to keep Ukrainian turbogenerators at the world level, improving auxiliary systems, improving and increasing the reliability of the excitation system, introduction of automatic systems for monitoring the state turbogenerators. Possible limits of use, advantages, disadvantages and problems of using renewable energy sources for Ukraine have been established.


2020 ◽  
Author(s):  
Evrim Oyguc ◽  
Abdul Hayır ◽  
Resat Oyguc

Increasing energy demand urge the developing countries to consider different types of energy sources. Owing the fact that the energy production capacity of renewable energy sources is lower than a nuclear power plant, developed countries like US, France, Japan, Russia and China lead to construct nuclear power plants. These countries compensate 80% of their energy need from nuclear power plants. Further, they periodically conduct tests in order to assess the safety of the existing nuclear power plants by applying impact type loads to the structures. In this study, a sample third-generation nuclear reactor building has been selected to assess its seismic behavior and to observe the crack propagations of the prestressed outer containment. First, a 3D model has been set up using ABAQUS finite element program. Afterwards, modal analysis is conducted to determine the mode shapes. Nonlinear dynamic time history analyses are then followed using an artificial strong ground motion which is compatible with the mean design spectrum of the previously selected ground motions that are scaled to Eurocode 8 Soil type B design spectrum. Results of the conducted nonlinear dynamic analyses are considered in terms of stress distributions and crack propagations.


Originally, coal was the main source of energy. It remains so throughout the 18th century during the period of the rapid industry development. Later on, oil and naphtha began to be used as energy sources and their usage expanded especially in 19th century. A special feature of the above mentioned fossil fuels is their long creation period – requiring millennia. They are a result of rotting of different plant and animal kinds. In comparison to the period of their formation, the period of their utilization is far shorter. In accordance with a number of existing statistics about 2050 year it may be talked about a depletion of the liquid fossil fuels, also, the world coal supplies are considered to last within the next 200 years. Therefore, the development of nuclear power engineering is considered to be one of the alternatives to generate energy. Recently, the nuclear power energy generation has been denied in many countries because of the risks associated with its generation and because these risks have been confirmed by serious accidents throughout the World. The storage of worked nuclear waste is also a problem and risky. The renewable energy sources are another possibility to generate energy.


Author(s):  
Robert M. MacGregor ◽  
Spencer J. Melby ◽  
Richard B. Schuessler ◽  
Ralph J. Damiano

The surgical treatment of atrial fibrillation has evolved over the past 2 decades due to the advent of ablation technology, and the introduction of less invasive surgical approaches. Current devices produce ablation lines that aim to replace the incisions of traditional surgical ablation strategies, such as the Cox-Maze procedure. This has helped to simplify and shorten surgical ablation procedures and has allowed for the development of minimally invasive surgical techniques. This review discusses surgical ablation energy sources and devices, providing background on device characteristics, mechanism of tissue injury, and success in creating transmural lesions.


Sign in / Sign up

Export Citation Format

Share Document