Economic assessment of circular patterns and business models for reuse and recycling of construction and demolition waste

2020 ◽  
pp. 31-50 ◽  
Author(s):  
Patrizia Ghisellini ◽  
Sergio Ulgiati
Keyword(s):  
Business Models ◽  
Economic Assessment ◽  
Construction And Demolition Waste ◽  
Demolition Waste

scholarly journals Circular Economy on Construction and Demolition Waste: A Literature Review on Material Recovery and Production

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2970 ◽  
Author(s):  
Clarence P. Ginga ◽  
Jason Maximino C. Ongpeng ◽  
Ma. Klarissa M. Daly
Keyword(s):  
Literature Review ◽  
Circular Economy ◽  
Business Models ◽  
Latent Dirichlet Allocation ◽  
Traditional Approach ◽  
Construction And Demolition Waste ◽  
The European Union ◽  
Demolition Waste ◽  
Material Recovery ◽  
New Construction

Construction and demolition waste (CDW) accounts for at least 30% of the total solid waste produced around the world. At around 924 million tons in the European Union in 2016 and 2.36 billion tons in China in 2018, the amount is expected to increase over the next few years. Dumping these wastes in sanitary landfills has always been the traditional approach to waste management but this will not be feasible in the years to come. To significantly reduce or eliminate the amount of CDW being dumped, circular economy is a possible solution to the increasing amounts of CDW. Circular economy is an economic system based on business models which replaces the end-of-life concept with reducing, reusing, recycling, and recovering materials. This paper discusses circular economy (CE) frameworks—specifically material recovery and production highlighting the reuse and recycling of CDW and reprocessing into new construction applications. Likewise, a literature review into recent studies of reuse and recycling of CDW and its feasibility is also discussed to possibly prove the effectivity of CE in reducing CDW. Findings such as effectivity of recycling CDW into new construction applications and its limitations in effective usage are discussed and research gaps such as reuse of construction materials are also undertaken. CE and recycling were also found to be emerging topics. Observed trends in published articles as well as the use of latent Dirichlet allocation in creating topic models have shown a rising awareness and increasing research in CE which focuses on recycling and reusing CDW.

Environmental and economic advantages of adopting reverse logistics for recycling construction and demolition waste: A case study of Brazilian construction and recycling companies

2019 ◽  
Vol 37 (2) ◽  
pp. 176-185 ◽  
Author(s):  
Geraldo C Oliveira Neto ◽  
José MF Correia
Keyword(s):  
Environmental Impact ◽  
Solid Waste ◽  
Reverse Logistics ◽  
Waste Treatment ◽  
Economic Assessment ◽  
Construction And Demolition Waste ◽  
Demolition Waste ◽  
Construction Companies ◽  
Solid Waste Treatment

The aim of this study was to assess the economic and environmental advantages of implementing reverse logistics to recycle solid waste from construction companies. The adopted research method was based on a systematic literature review and two case studies. For the economic assessment, the return on investment, the internal rate of return, and the discounted payback factors were considered, while the material intensity factor was used for the environmental impact assessment. This study shows that there are economic and environmental advantages associated with the use of reverse logistics for solid waste treatment and recycling. In 2016, the purchase of recycled blocks resulted in a profit of over US$45,000 for one company, and another company earned almost US$250,000 in the same year by recycling solid waste from manufacturing blocks and selling iron, wood, paper, and plastics. Furthermore, the environmental impact was reduced. This paper contributes to the dissemination of knowledge regarding the advantages of adopting reverse logistics for recycling construction and demolition waste, and creates new opportunities for companies.

scholarly journals BIM for Deconstruction: An Interpretive Structural Model of Factors Influencing Implementation

Buildings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 227
Author(s):  
Lovelin Obi ◽  
Bankole Awuzie ◽  
Chukwudi Obi ◽  
Temitope S. Omotayo ◽  
Adekunle Oke ◽  
...  
Keyword(s):  
Construction Industry ◽  
Business Models ◽  
Structural Model ◽  
Factor Model ◽  
Construction And Demolition Waste ◽  
Successful Implementation ◽  
Demolition Waste ◽  
Factors Influencing ◽  
The Uk ◽  
Interpretive Structural Model

Transitioning from demolition to deconstruction practices for end-of-life performances is gaining increasing attention following the need for the construction industry to minimise construction and demolition waste. Building information modelling (BIM) presents an opportunity for sustainable deconstruction. However, the notion of BIM for deconstruction (BIMfD) is still in its infancy in the United Kingdom. Although a few studies on BIMfD are evident, a focus on identifying the underlying factors necessary for successful implementation of BIMfD is lacking. The purpose of this study was to identify and analyse the underlying factors necessary for BIMfD implementation in the UK construction industry. It employed a four-stage research design. The reviewed literature explored extant views on BIM implementation factors to identify an initial list of possible factors influencing BIMfD implementation. Subsequently, a mix of questionnaire, focus group discussions and structured interviews were employed at various stages to refine and contextualise 15 factors necessary for BIMfD implementation in the UK construction industry. The contextual interrelationships among the factors were evaluated using interpretive structured modelling (ISM). This evaluation culminated in a BIMfD implementation factor model. The findings identified BIMfD experts, responsiveness of business models to innovative practices and industry’s acceptance to embrace change as the principal factors influencing BIMfD implementation in the UK. The implications of the findings attest that BIMfD experts and advisors must champion the adoption and implementation of BIMfD in the UK and business models need to become more responsive to accommodate BIMfD innovative practices. A BIMfD framework was conceptualised. Even though the BIMfD framework was designed from the UK perspective, the global construction industry can leverage the outcomes of this study. This paper, therefore, brings to the fore, a hierarchical BIMfD implementation factor model to support improved deconstruction practices in the construction industry.

Implementation of Circular Business Models in Construction and Demolition Waste Management of India

2021 ◽  
Vol 11 (2) ◽  
pp. 87-93
Author(s):  
Jaya Surya R ◽  
Dr. Kranti Kumar M
Keyword(s):  
Sustainable Development ◽  
Waste Management ◽  
Circular Economy ◽  
Business Models ◽  
Total Solid ◽  
Environmental Benefits ◽  
Construction And Demolition Waste ◽  
Environmental Harm ◽  
New Delhi ◽  
Demolition Waste

In the world, around 30% of the total solid waste is construction and demolition waste. In India, as per the building material promotion council, 150 million tonnes of C&D waste is generated every year. In the total C&D waste, only one percent which is 6500 tonnes per day is recycled, mentioned in the report released by the Centre for science and environment, New Delhi. There is a rising gap between increasing demand and limited sources in the construction sector of India. It leads to market instability and environmental harm. Linear business model is most commonly used in present times. It is one of the main reasons for the increase of C&D wastes. This linear approach (source-commodity-waste) encourages the one-use of products. It leads to excessive dumping of C&D wastes in landfills, which is not a sustainable practice. Circular business models leads to closed-loop approach (source-commodity-waste-new source). The adoption of circular business models in C&D waste management is the possible solution for the decreasing resources. This study aims to discuss the implementation of various approaches including conceptual models, methods, and tools of circular business models in the C&D waste management in India, which leads to the circular economy and sustainable development. Through the study of recent literature sources, various data related to circular business models, circular economy are collected. Data analysis will be done using the literature review. This research will highlight the socio-economic, environmental benefits, improvements, and the applicability of circular business models in the C&D waste management of India. This paper is concluded that framing strict circular economy policies for India would encourage the implementation of CBM in C&D waste management which reduces the need for fresh resources and ensures sustainable development.

A culture-based solution for construction and demolition waste management in Sri Lanka: a literature review

2019 ◽  
Author(s):  
A.P.K.D. Mendis ◽  
◽  
A. Samaraweera ◽  
D.M.G.B.T. Kumarasiri ◽  
D. Rajini ◽  
...  
Keyword(s):  
Sri Lanka ◽  
Literature Review ◽  
Waste Management ◽  
Construction And Demolition Waste ◽  
Demolition Waste

CONCRETO PERMEÁVEL COM AGREGADO DA RECICLAGEM DE RESÍDUOS DA CONSTRUÇÃO E DEMOLIÇÃO: REVISÃO BIBLIOGRÁFICA / PERMEABLE CONCRETE WITH AGGREGATE FROM CONSTRUCTION AND DEMOLITION WASTE RECYCLING: LITERATURE REVIEW

2020 ◽  
Vol 6 (9) ◽  
pp. 73169-73180
Author(s):  
Kelly Patrícia Torres Vieira Brasileiro ◽  
Bacus de Oliveira Nahime ◽  
Michell Macedo Alves ◽  
Pâmela Millena Kunan ◽  
Vitor Alvares ◽  
...  
Keyword(s):  
Literature Review ◽  
Waste Recycling ◽  
Construction And Demolition Waste ◽  
Demolition Waste

scholarly journals Application of Construction and Demolition Waste in Civil Construction in the Brazilian Amazon—Case Study of the City of Rio Branco

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2247
Author(s):  
Fernando da Silva Souza ◽  
José Maria Franco de Carvalho ◽  
Gabriela Grotti Silveira ◽  
Vitória Cordeiro Araújo ◽  
Ricardo André Fiorotti Peixoto
Keyword(s):  
Mechanical Strength ◽  
Raw Materials ◽  
Amazon Region ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Federal State ◽  
Construction Sites ◽  
Demolition Waste ◽  
Conventional Concrete ◽  
Initial Adhesion

The lack of usable aggregates for civil construction in Rio Branco (capital of Acre, a Federal State in the Amazon region) makes the production and use of recycled aggregates from construction and demolition waste (CDW) an alternative of great interest. In this study, a comprehensive characterization of CDW collected from 24 construction sites of six building types and three different construction phases (structures, masonry, and finishing) was carried out. The fine and coarse recycled aggregates were produced and evaluated in 10 different compositions. The aggregates’ performance was evaluated in four mixtures designed for laying and coating mortars with a total replacement of conventional aggregates and a mixture designed for a C25 concrete with 50% and 100% replacement of conventional aggregates. CDW mortars showed lower densities and greater water retention, initial adhesion, and mechanical strength than conventional mortars. CDW concretes presented lower densities and greater resistance to chloride penetration than conventional concrete, with a small mechanical strength reduction. The recycled CDW aggregates proved to be technologically feasible for safe application in mortars and concrete; for this reason, it is believed that the alternative and proposed methodology is of great interest to the Amazonian construction industry, considering the high costs of raw materials and the need for defining and consolidating a sustainable development model for the Amazon region.

scholarly journals BIM-Based Tools for Managing Construction and Demolition Waste (CDW): A Scoping Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8427
Author(s):  
Bahareh Nikmehr ◽  
M. Reza Hosseini ◽  
Jun Wang ◽  
Nicholas Chileshe ◽  
Raufdeen Rameezdeen
Keyword(s):  
Life Cycle ◽  
Scoping Review ◽  
Construction And Demolition Waste ◽  
Future Research ◽  
Demolition Waste ◽  
Scant Attention ◽  
Intellectual Deficiencies ◽  
Whole Life Cycle ◽  
Point Of Reference ◽  
Design And Construction

This article provides a picture of the latest developments in providing BIM-based tools for construction and demolition waste (CDW) management. The coverage and breadth of the literature on offering BIM-based tools and technologies for dealing with CDW throughout the whole life cycle of construction are investigated, and gaps are identified. Findings reveal that, although various BIM-based technologies are closely associated with CDW, much of the existing research on this area has focused on the design and construction phase; indeed, the problem of CDW in post-construction stages has received scant attention. Besides, the now available tools and technologies are lacking in cross-phase insights into project waste aspects and are weak in theoretical rigor. This article contributes to the field by identifying the intellectual deficiencies in offering BIM-based tools and technologies when dealing with CDW. So, too, it points to major priorities for future research on the topic. For practitioners, the study provides a point of reference and raises awareness in the field about the most advanced available BIM-based technologies for dealing with CDW problems.

Sign in / Sign up

Export Citation Format

Share Document