Design and performance of a low-cost microalgae culturing system for growing Chlorella sorokiniana on cooking cocoon wastewater

2022 ◽  
Vol 62 ◽  
pp. 102607
Author(s):  
Mengting Yang ◽  
Chunye Xue ◽  
Linqing Li ◽  
Zheng Gao ◽  
Qiaoqiao Liu ◽  
...  
Keyword(s):  
Low Cost ◽  
Chlorella Sorokiniana ◽  
And Performance

Programmable Integrated Photonics

2020 ◽  
Author(s):  
José Capmany ◽  
Daniel Pérez
Keyword(s):  
Integrated Circuit ◽  
Performance Monitoring ◽  
Low Cost ◽  
Limiting Factors ◽  
External Control ◽  
Integrated Photonics ◽  
New Paradigm ◽  
Photonic Integrated Circuit ◽  
And Performance ◽  
Application Fields

Programmable Integrated Photonics (PIP) is a new paradigm that aims at designing common integrated optical hardware configurations, which by suitable programming can implement a variety of functionalities that, in turn, can be exploited as basic operations in many application fields. Programmability enables by means of external control signals both chip reconfiguration for multifunction operation as well as chip stabilization against non-ideal operation due to fluctuations in environmental conditions and fabrication errors. Programming also allows activating parts of the chip, which are not essential for the implementation of a given functionality but can be of help in reducing noise levels through the diversion of undesired reflections. After some years where the Application Specific Photonic Integrated Circuit (ASPIC) paradigm has completely dominated the field of integrated optics, there is an increasing interest in PIP justified by the surge of a number of emerging applications that are and will be calling for true flexibility, reconfigurability as well as low-cost, compact and low-power consuming devices. This book aims to provide a comprehensive introduction to this emergent field covering aspects that range from the basic aspects of technologies and building photonic component blocks to the design alternatives and principles of complex programmable photonics circuits, their limiting factors, techniques for characterization and performance monitoring/control and their salient applications both in the classical as well as in the quantum information fields. The book concentrates and focuses mainly on the distinctive features of programmable photonics as compared to more traditional ASPIC approaches.

The Use of Microcomputer Simulations in Undergraduate Neurophysiology Experiments

1987 ◽  
Vol 14 (3) ◽  
pp. 134-140 ◽  
Author(s):  
K.A. Clarke
Keyword(s):  
Low Cost ◽  
Animal Experiments ◽  
Theoretical Background ◽  
General Purpose ◽  
Microcomputer System ◽  
Laboratory Equipment ◽  
Teaching Objectives ◽  
Compound Action Potentials ◽  
Experimental Management ◽  
And Performance

Practical classes in neurophysiology reinforce and complement the theoretical background in a number of ways, including demonstration of concepts, practice in planning and performance of experiments, and the production and maintenance of viable neural preparations. The balance of teaching objectives will depend upon the particular group of students involved. A technique is described which allows the embedding of real compound action potentials from one of the most basic introductory neurophysiology experiments—frog sciatic nerve, into interactive programs for student use. These retain all the elements of the “real experiment” in terms of appearance, presentation, experimental management and measurement by the student. Laboratory reports by the students show that the experiments are carefully and enthusiastically performed and the material is well absorbed. Three groups of student derive most benefit from their use. First, students whose future careers will not involve animal experiments do not spend time developing dissecting skills they will not use, but more time fulfilling the other teaching objectives. Second, relatively inexperienced students, struggling to produce viable neural material and master complicated laboratory equipment, who are often left with little time or motivation to take accurate readings or ponder upon neurophysiological concepts. Third, students in institutions where neurophysiology is taught with difficulty because of the high cost of equipment and lack of specific expertise, may well have access to a low cost general purpose microcomputer system.

scholarly journals Experiments with Neural Networks in the Identification and Control of a Magnetic Levitation System Using a Low-Cost Platform

2021 ◽  
Vol 11 (6) ◽  
pp. 2535
Author(s):  
Bruno E. Silva ◽  
Ramiro S. Barbosa
Keyword(s):  
Neural Networks ◽  
Neural Control ◽  
Magnetic Levitation ◽  
Low Cost ◽  
Training Data ◽  
Neural Controllers ◽  
Levitation System ◽  
Internal Model Controller ◽  
Magnetic Levitation System ◽  
And Performance

In this article, we designed and implemented neural controllers to control a nonlinear and unstable magnetic levitation system composed of an electromagnet and a magnetic disk. The objective was to evaluate the implementation and performance of neural control algorithms in a low-cost hardware. In a first phase, we designed two classical controllers with the objective to provide the training data for the neural controllers. After, we identified several neural models of the levitation system using Nonlinear AutoRegressive eXogenous (NARX)-type neural networks that were used to emulate the forward dynamics of the system. Finally, we designed and implemented three neural control structures: the inverse controller, the internal model controller, and the model reference controller for the control of the levitation system. The neural controllers were tested on a low-cost Arduino control platform through MATLAB/Simulink. The experimental results proved the good performance of the neural controllers.

scholarly journals Fabrication and Compressive Behavior of a Micro-Lattice Composite by High Resolution DLP Stereolithography

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 785
Author(s):  
Chow Shing Shin ◽  
Yu Chia Chang
Keyword(s):  
High Resolution ◽  
Lattice Structure ◽  
Low Cost ◽  
Hierarchical Structures ◽  
Dip Coating ◽  
Unit Cell ◽  
Digital Light Processing ◽  
Unit Cell Size ◽  
Wide Range ◽  
And Performance

Lattice structures are superior to stochastic foams in mechanical properties and are finding increasing applications. Their properties can be tailored in a wide range through adjusting the design and dimensions of the unit cell, changing the constituent materials as well as forming into hierarchical structures. In order to achieve more levels of hierarchy, the dimensions of the fundamental lattice have to be small enough. Although lattice size of several microns can be fabricated using the two-photon polymerization technique, sophisticated and costly equipment is required. To balance cost and performance, a low-cost high resolution micro-stereolithographic system has been developed in this work based on a commercial digital light processing (DLP) projector. Unit cell lengths as small as 100 μm have been successfully fabricated. Decreasing the unit cell size from 150 to 100 μm increased the compressive stiffness by 26%. Different pretreatments to facilitate the electroless plating of nickel on the lattice structure have been attempted. A pretreatment of dip coating in a graphene suspension is the most successful and increased the strength and stiffness by 5.3 and 3.6 times, respectively. Even a very light and incomplete nickel plating in the interior has increase the structural stiffness and strength by more than twofold.

Description and performance of a highly versatile, low‐cost fiber‐optic confocal Raman microscope

1996 ◽  
Vol 67 (1) ◽  
pp. 79-84 ◽  
Author(s):  
C. M. Stellman ◽  
K. S. Booksh ◽  
J. E. Reddic ◽  
M. L. Myrick
Keyword(s):  
Fiber Optic ◽  
Low Cost ◽  
Confocal Raman ◽  
And Performance

The Design and Implementation of ECC High-Speed Encryption Engine Based on FPGA

2012 ◽  
Vol 459 ◽  
pp. 544-548 ◽  
Author(s):  
Wei Liang ◽  
Jian Bo Xu ◽  
Wei Hong Huang ◽  
Li Peng
Keyword(s):  
Data Transmission ◽  
High Speed ◽  
Lower Cost ◽  
Low Cost ◽  
Rapid Development ◽  
Security Technology ◽  
Multiplication Algorithm ◽  
Secure Data Transmission ◽  
And Performance ◽  
Computation Speed

Network security technology ensures secure data transmission in network. Meanwhile, it brings extra overhead of security system in terms of cost and performance, which seriously affects the rapid development of existing high-speed encryption systems. The existing encryption technology cannot meet the demand of high security, low cost and high real-time. For solving above problems, an ECC encryption engine architecture based on scalable public key cipher and a high-speed configurable multiplication algorithm are designed. The algorithm was tested on FPGA platform and the experiment results show that the system has better computation speed and lower cost overhead. By comparing with other systems, our system has benefits in terms of hardware overhead and encryption time ratio

scholarly journals Soft Spherical Tensegrity Robot Design Using Rod-Centered Actuation and Control

2016 ◽  
Author(s):  
Lee-Huang Chen ◽  
Kyunam Kim ◽  
Ellande Tang ◽  
Kevin Li ◽  
Richard House ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Low Cost ◽  
Space Exploration ◽  
Robot Design ◽  
The Novel ◽  
Flexible Design ◽  
Spherical Robot ◽  
Potential Benefits ◽  
And Performance ◽  
And Control

This paper presents the design, analysis and testing of a fully actuated modular spherical tensegrity robot for co-robotic and space exploration applications. Robots built from tensegrity structures (composed of pure tensile and compression elements) have many potential benefits including high robustness through redundancy, many degrees of freedom in movement and flexible design. However to fully take advantage of these properties a significant fraction of the tensile elements should be active, leading to a potential increase in complexity, messy cable and power routing systems and increased design difficulty. Here we describe an elegant solution to a fully actuated tensegrity robot: The TT-3 (version 3) tensegrity robot, developed at UC Berkeley, in collaboration with NASA Ames, is a lightweight, low cost, modular, and rapidly prototyped spherical tensegrity robot. This robot is based on a ball-shaped six-bar tensegrity structure and features a unique modular rod-centered distributed actuation and control architecture. This paper presents the novel mechanism design, architecture and simulations of TT-3, the first untethered, fully actuated cable-driven six-bar tensegrity spherical robot ever built and tested for mobility. Furthermore, this paper discusses the controls and preliminary testing performed to observe the system’s behavior and performance.

Static Electroplating of Iron Triad on Fastener Washers

2021 ◽  
Vol 879 ◽  
pp. 275-283
Author(s):  
Koay Mei Hyie ◽  
Salina Budin ◽  
Normariah Che Maideen ◽  
Yudi Rahmawan
Keyword(s):  
Carbon Steel ◽  
Low Cost ◽  
Sem Analysis ◽  
Nickel Iron ◽  
Cobalt Nickel ◽  
Protection Layer ◽  
And Performance ◽  
Resistant Layer ◽  
Corrosion Protection Coating ◽  
Protection Coating

Fasteners are commonly used in construction industry for parts joining purpose. There are many types of construction fasteners such as stud, bolt, anchor, nut, screw, and washer. The major problem of the fastener made by carbon steel is the poor resistance to corrosion. Electroplating is a simple yet low-cost tool to give a strong corrosion protection coating layer on the carbon steel. This study was performed to investigate the effect of current and deposition time on the iron triad (cobalt-nickel-iron) electroplating on the fastener washer. The experiment was conducted at 50 °C, pH 1-3 and at different electroplating time (30 minutes to 90 minutes) and current (0.2 A to 0.5 A). Burnt-out surface coating was observed on the fastener washer when the current was more than 0.4 A. A field test was carried out for 60 days to observe the corrosion behavior and performance of the products. Scanning electron microscope (SEM) analysis showed that a thin protection layer with 5.64 µm was formed at 60 minutes of electroplating time and 0.4 A of current. The surface roughness of the fastener washer was increased by increasing the electroplating time and current. The hardness was also improved with higher current and electroplating time if compared to the original fastener washer. The result of this study confirmed that a strong adhesive corrosion resistant layer to the fastener washer was using the current of 0.4 A (77 mA/cm2) and the electroplating time of 60 minutes.

Sign in / Sign up

Export Citation Format

Share Document