scholarly journals Physicochemical properties of potential low-temperature drilling fluids for deep ice core drilling

2016 ◽  
Vol 129 ◽  
pp. 45-50 ◽  
Author(s):  
Ning Liu ◽  
Huiwen Xu ◽  
Yang Yang ◽  
Lili Han ◽  
Lili Wang ◽  
...  
2014 ◽  
Vol 55 (68) ◽  
pp. 339-350 ◽  
Author(s):  
P.G. Talalay

AbstractMore than 170 years ago, Louis Agassiz, one of the creators of glacial theory, made his first attempt to drill into the bed of Unteraargletscher, Swiss Alps. Since that time, various systems for thermal and mechanical drilling have been designed especially for boring into ice, and some conventional drill rigs been adopted for ice coring. Although contemporary ice-drilling knowledge and techniques are now familiar, there remain many problems to be solved by advanced modern technology. Specific challenges related to improving old drilling methods and developing new emerging technologies include: (1) identification of depth limitation of ‘dry’ drilling; (2) improvement of casing; (3) searching for the new environmentally friendly low-temperature drilling fluids; (4) reliable elimination of sticking drills; (5) improvement of core quality in the brittle zone; (6) additional core sampling from borehole walls after the core has been drilled; (7) obtaining oriented core; (8) designing automation drilling systems; (9) developing rapid-access drills. Possible ways of solving these problems are presented below.


2021 ◽  
Author(s):  
Giovanni Baccolo ◽  
Barbara Delmonte ◽  
Paul Niles ◽  
Giannantonio Cibin ◽  
Elena Di Stefano ◽  
...  

<p>On Earth, jarosite is a weathering product forming in acidic-oxidative environments from the alteration of iron-bearing minerals in presence of liquid water. Typical settings where this iron-potassium hydrated sulphate is found, are weathering zones of pyrite-rich deposits, evaporative basins and fumaroles. Jarosite is not only known on Earth, it also occurs on Mars, where it was firstly identified by the Opportunity rover. The mineral was in fact recognized in the finely layered formations outcropping at Meridiani Planum and that were accurately investigated by the rover (Klingelhöfer et al. 2004). Since jarosite requires liquid water to form, its occurrence on Mars has been regarded as an evidence for the presence of liquid water in the geologic past of Mars (Elwood-Madden et al., 2004). Since then, many models have been proposed to describe the environments where the precipitation of Martian jarosite took place. The most accepted ones deal with evaporative basins similar to Earth’s playas, others concern volcanic activity and hydrothermal processes. An alternative proposal predicted that jarosite may have formed as a consequence of weathering of mineral dust trapped in massive ice deposits, i.e. the ice-weathering model (Niles & Michalsky, 2009). The hypothesis that jarosite formed on Mars because of low-temperature, acidic and water limited weathering, is not new (Burns, 1987), but until now no direct evidences were available to support it.</p><p>A potential Earth analogue to investigate such processes is deep Antarctic ice. We present a first investigation of deep ice samples from the Talos Dome ice core (East Antarctica) aimed at the identification of englacial jarosite, so as to support the ice-weathering model. Evidences gathered through independent techniques showed that jarosite is actually present in deep Antarctic ice and results from the weathering of dust trapped into ice. The process is controlled by the re-crystallization of ice grains and the concurrent re-location of impurities at grain-junctions, which both depend on ice depth. This study demonstrates that the deep englacial environment is suitable for jarosite precipitation. Our findings support the hypothesis that, as originally predicted by the ice-weathering model, paleo ice-related processes have been important in the geologic and geochemical history of Mars.</p><p> </p><p><strong>References</strong></p><p>Burns, R. Ferric sulfates on Mars. <em>J. Geophys. Res.</em> <strong>92</strong>, E570-E574 (1987).</p><p>Elwood-Madden et al., 2004. Jarosite as an indicator of water-limited chemical weathering on Mars. <em>Nature</em> <strong>431</strong>, 821-823 (2004).</p><p>Klingelhöfer, G. et al. Jarosite and Hematite at Meridiani Planum from Opportunity's Mössbauer Spectrometer. <em>Science</em> <strong>306</strong>, 1740-1745 (2004).</p><p>Niles, P. B. & Michalski, J. M. Meridiani Planum sediments on Mars formed through weathering in massive ice deposits. <em>Nat. Geosci.</em> <strong>2</strong>, 215-220 (2009).</p>


2000 ◽  
Vol 46 (153) ◽  
pp. 341-345 ◽  
Author(s):  
H. Engelhardt ◽  
B. Kamb ◽  
R. Bolsey

AbstractA new method of ice-core drilling uses an annulus of hot-water jets to melt out a cylindrical ice core. This lightweight device used in combination with a fast hot-water drill can quickly obtain ice cores from any depth.


2012 ◽  
Vol 490-495 ◽  
pp. 3114-3118
Author(s):  
Xiao Ling Jiang ◽  
Zong Ming Lei ◽  
Kai Wei

With six-speed rotary viscometer measuring the rheology of drilling fluid at low temperature, during the high-speed process, the drilling fluid temperature is not constant at low temperature, which leads to the inaccuracy in rheological measurement. When R/S rheometer is used cooperating with constant low-temperature box , the temperature remains stable during the process of determining the drilling fluid rheology under low temperature. The R/S rheometer and the six-speed rotational viscometer are both coaxial rotational viscometers, but they work in different ways and the two cylindrical clearance between them are different.How to make two viscometer determination result can maintain consistent?The experimental results show that, The use of R/S rheometer, with the shear rate for 900s-1 shear stress values instead of six speed rotary viscometer shear rate for 1022s-1 shear stress values.Then use two-point formula to calculate rheological parameters.The R/S rheometer rheological parameter variation with temperature has a good linear relationship,Can better reflect the rheological properties of drilling fluids with low temperature changerule


2007 ◽  
Vol 47 ◽  
pp. 115-124 ◽  
Author(s):  
Robert Mulvaney ◽  
Olivier Alemany ◽  
Philippe Possenti

AbstractWe describe a project to retrieve a 948m deep ice core from Berkner Island, Antarctica. Using relatively lightweight logistics and a small team, the drilling operation over three austral summer seasons used electromechanical drilling technology, described in detail, from a covered shallow pit and a fluid-filled borehole. A basal temperature well below pressure-melting point meant that no drilling problems were encountered when approaching the bed and the borehole penetrated through to the base of the ice sheet, and sediment was retrieved from beneath the ice.


1998 ◽  
Vol 44 (146) ◽  
pp. 179-181 ◽  
Author(s):  
J. M. Casas ◽  
F. Sàbat ◽  
J. M. Vilaplana ◽  
J. M. Parés ◽  
D. M. Pomeroy

Abstract A new portable device for ice-core drilling, specially designed for thin tephra-layer sampling, was tested on the South Shetland glaciers during the 1994-95 Antarctic summer. The machine is based on a combination of the standard paleomagnetism drilling machine and a specially built drill-bit designed for ice-coring.


Water ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1638 ◽  
Author(s):  
Aleksandra Ciesielska ◽  
Wojciech Ciesielski ◽  
Karen Khachatryan ◽  
Henryk Koloczek ◽  
Damian Kulawik ◽  
...  

Our former studies delivered a strong evidence that water indirectly treated with low-temperature, low-pressure glow plasma of low frequency (GP) changed its structure depending on the atmosphere in which such treatment was performed (air, ammonia, and nitrogen) and on the time of the treatment (0 to 120 min). In every case, water of different physicochemical characteristics and interesting biological functions was produced. Therefore, the relevant studies were extended to treating deionized water with GP under methane. The resulting samples were characterized by means of ultraviolet/visible (UV/VIS), Fourier transformation infrared-attenuated total reflectance (FTIR-ATR), electron spin resonance (ESR) and Raman spectroscopies, differential scanning calorimetry (DSC), thermogravimetry, pH, conductivity, and refractive index. The generated samples of water had entirely different physicochemical properties from those recorded for water treated with GP in the air and under both ammonia and nitrogen. The treatment of water with GP under methane did not produce clathrates hosting methane molecules. Thermogravimetry delivered an evidence that the treatment with GP increased the aqueous solubility of methane. That solubility non-linearly changed against the treatment time.


Sign in / Sign up

Export Citation Format

Share Document