Comparative study on the crack growth behaviours of E690 steel and heat-affected zone microstructures under cathodic potential in artificial seawater based on mechano-electrochemical effect at crack tip

2022 ◽  
pp. 110103
Author(s):  
Yong Li ◽  
Yang You ◽  
Xuewei Lv
Keyword(s):  
Comparative Study ◽  
Crack Growth ◽  
Heat Affected Zone ◽  
Crack Tip ◽  
Artificial Seawater ◽  
Cathodic Potential ◽  
Electrochemical Effect

scholarly journals Effect of Cold Working on the Driving Force of the Crack Growth and Crack Growth Rate of Welded Joints under One Overload

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Hongliang Yang ◽  
He Xue ◽  
Fuqiang Yang ◽  
Shuai Wang
Keyword(s):  
Growth Rate ◽  
Crack Growth Rate ◽  
Creep Rate ◽  
Crack Growth ◽  
Heat Affected Zone ◽  
Driving Force ◽  
Cold Working ◽  
Crack Tip ◽  
Simulation Method ◽  
Fusion Line

To understand the effect of cold working of welding heat-affected zone on the driving force of the crack growth and crack growth rate of stress corrosion cracking (SCC) near the welding fusion line, the finite element simulation method was used to analyze the effect of cold working on the tensile stress of the crack tip at different locations near the fusion line. On this basis, the strain rate of the crack tip in the Ford-Andresen model is replaced by the creep rate of the crack tip, and the creep rate of the crack tip is used as driving force for the crack growth of SCC. The effect of the cold working level at the heat-affected zone on the driving force of the crack growth and crack growth rate of SCC are analyzed, and driving force of the crack growth and crack growth rate of SCC after one overload was compared.

scholarly journals Study on the Influence of the Gurson–Tvergaard–Needleman Damage Model on the Fatigue Crack Growth Rate

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1183
Author(s):  
Edmundo R. Sérgio ◽  
Fernando V. Antunes ◽  
Diogo M. Neto ◽  
Micael F. Borges
Keyword(s):  
Growth Rate ◽  
Fatigue Crack ◽  
Crack Growth Rate ◽  
Fatigue Crack Growth ◽  
Plastic Strain ◽  
Crack Growth ◽  
Damage Model ◽  
Crack Tip ◽  
Strength Parameter ◽  
Stress Intensity Factor Range

The fatigue crack growth (FCG) process is usually accessed through the stress intensity factor range, ΔK, which has some limitations. The cumulative plastic strain at the crack tip has provided results in good agreement with the experimental observations. Also, it allows understanding the crack tip phenomena leading to FCG. Plastic deformation inevitably leads to micro-porosity occurrence and damage accumulation, which can be evaluated with a damage model, such as Gurson–Tvergaard–Needleman (GTN). This study aims to access the influence of the GTN parameters, related to growth and nucleation of micro-voids, on the predicted crack growth rate. The results show the connection between the porosity values and the crack closure level. Although the effect of the porosity on the plastic strain, the predicted effect of the initial porosity on the predicted crack growth rate is small. The sensitivity analysis identified the nucleation amplitude and Tvergaard’s loss of strength parameter as the main factors, whose variation leads to larger changes in the crack growth rate.

Comparative study of crack growth behaviors of fully-lamellar and bi-lamellar Ti-6Al-3Nb-2Zr-1Mo alloy

2019 ◽  
Vol 789 ◽  
pp. 249-255 ◽  
Author(s):  
Q. Wang ◽  
J.Q. Ren ◽  
Y.K. Wu ◽  
P. Jiang ◽  
J.Q. Li ◽  
...  
Keyword(s):  
Comparative Study ◽  
Crack Growth ◽  
Fully Lamellar

Modeling the Interactions of Hydrogen, Stress and Dissolution in Near-Neutral pH Stress Corrosion Cracking of Pipelines

2006 ◽  
Author(s):  
Frank Y. Cheng
Keyword(s):  
Stress Corrosion ◽  
Dissolution Rate ◽  
Crack Growth ◽  
Anodic Dissolution ◽  
Hydrogen Concentration ◽  
Stress Corrosion Cracking ◽  
Crack Tip ◽  
Corrosion Cracking ◽  
Neutral Ph ◽  
Ph Stress

A thermodynamic model was developed to determine the interactions of hydrogen, stress and anodic dissolution at the crack-tip during near-neutral pH stress corrosion cracking in pipelines. By analyzing the free-energy of the steel in the presence and absence of hydrogen and stress, it is demonstrated that a synergism of hydrogen and stress promotes the cracking of the steel. The enhanced hydrogen concentration in the stressed steel significantly accelerates the crack growth. The quantitative prediction of the crack growth rate in near-neutral pH environment is based on the determination of the effect of hydrogen on the anodic dissolution rate in the absence of stress, the effect of stress on the anodic dissolution rate in the absence of hydrogen, the synergistic effect of hydrogen and stress on the anodic dissolution rate at the crack-tip and the effect of the variation of hydrogen concentration on the anodic dissolution rate.

Finite Element Simulation of Stable Fatigue Crack Growth Using Critical CTOD Determined by Preliminary Finite Element Analysis

2014 ◽  
Vol 891-892 ◽  
pp. 1675-1680
Author(s):  
Seok Jae Chu ◽  
Cong Hao Liu
Keyword(s):  
Finite Element ◽  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Finite Element Simulation ◽  
Crack Growth ◽  
Crack Tip ◽  
Stress Intensity Factor Range ◽  
Crack Tip Opening Displacement ◽  
Element Analysis ◽  
Element Simulation

Finite element simulation of stable fatigue crack growth using critical crack tip opening displacement (CTOD) was done. In the preliminary finite element simulation without crack growth, the critical CTOD was determined by monitoring the ratio between the displacement increments at the nodes above the crack tip and behind the crack tip in the neighborhood of the crack tip. The critical CTOD was determined as the vertical displacement at the node on the crack surface just behind the crack tip at the maximum ratio. In the main finite element simulation with crack growth, the crack growth rate with respect to the effective stress intensity factor range considering crack closure yielded more consistent result. The exponents m in the Paris law were determined.

Estimation of Crack Growth Life in Rail with a Squat Defect

2009 ◽  
Vol 417-418 ◽  
pp. 313-316 ◽  
Author(s):  
Hyun Kyu Jun ◽  
Won Hee You
Keyword(s):  
Growth Rate ◽  
Crack Growth Rate ◽  
Crack Growth ◽  
Rail Steel ◽  
Crack Tip ◽  
Cost Effective ◽  
Rolling Contact ◽  
Hertzian Contact ◽  
Maintenance Strategy ◽  
Whole Life Cycle

Rolling contact fatigue initiated defects such as surface corrugation, head check, squat, are one of growing problems in high speed railway line. A squat is generally developed below the rail surface and grows parallel to surface until it turns down into rail. Estimation of critical crack size and crack growth rate is an essential to prevent rail from failure and develop cost effective railway maintenance strategy. In this study, we predict crack growth rate of a rail with a squat defect. For this purpose, a rail model with a squat defect is developed. Timoshenko’s beam theory is applied to calculate the global bending stress at the crack tip and Hertzian contact model is applied to calculate the local contact stresses at the surface of rail by simulating rolling over a railway wheel on a rail. Stress intensity factors are calculated from the total stress at the crack tip. Fatigue crack growth curve of 60kg rail steel is applied to calculated crack growth rate. Software to predict crack growth life through whole life cycle is developed. We expect that we can make a more cost effective rail maintenance strategy by considering the crack growth analysis for a defective rail.

scholarly journals In-situ SEM and optical microscopy testing for investigation of fatigue crack growth mechanism under overload

2018 ◽  
Vol 165 ◽  
pp. 13013
Author(s):  
Wei Zhang ◽  
Liang Cai
Keyword(s):  
Growth Rate ◽  
Crack Growth Rate ◽  
Optical Microscopy ◽  
Crack Growth ◽  
Load Condition ◽  
Crack Tip ◽  
Initial Crack ◽  
Crack Growth Behavior ◽  
Single Overload

In this paper, the in-situ scanning electron microscope (SEM) and optical microscopy experiments are performed to investigate the crack growth behavior under the single tensile overload. The objectives are to (i) examine the overload-induced crack growth micromechanisms, including the initial crack growth acceleration and the subsequent retardation period; (ii) investigate the effective region of single overload on crack growth rate. The specimen is a small thin Al2024-T3 plate with an edge-crack, which is loaded and observed in the SEM chamber. The very high resolution images of the crack tip are taken under the simple variable amplitude loading. Imaging analysis is performed to quantify the crack tip deformation at any time instant. Moreover, an identical specimen subjected to the same load condition is observed under optical microscope. In this testing, fine speckling is performed to promote the accuracy of digital imaging correlation (DIC). The images around the crack tip are taken at the peak loads before, during and after the single overload. After that, the evolution of local strain distribution is obtained through DIC technique. The results show that the rapid connection between the main crack and microcracks accounts for the initial crack growth acceleration. The crack closure level can be responsible for the crack growth rate during the steady growth period. Besides that, the size of retardation area is larger than the classical solution.

Sign in / Sign up

Export Citation Format

Share Document