Damage and failure mechanism of concentric perforated granite under static pressure after alternating action of high temperature and water at different temperatures

2021 ◽  
pp. 107860
Author(s):  
WANG Chun ◽  
Li Jia ◽  
WANG Cheng ◽  
Zu-qiang XIONG ◽  
Hu Man-gu ◽  
...  
Keyword(s):  
High Temperature ◽  
Failure Mechanism ◽  
Static Pressure ◽  
Damage And Failure ◽  
Different Temperatures

Mechanical Response of T300/BMP350 Composites under Tensile Loading at Room and Elevated Temperatures

2014 ◽  
Vol 1035 ◽  
pp. 138-143
Author(s):  
Ping Zhou ◽  
Pu Rong Jia ◽  
Wen Ge Pan
Keyword(s):  
High Temperature ◽  
Failure Modes ◽  
Elevated Temperatures ◽  
Mechanical Response ◽  
Effect Of Temperature ◽  
Matrix Composites ◽  
Stress Strain ◽  
Damage And Failure ◽  
Different Temperatures ◽  
Static Tensile

In this paper, the effect of elevated temperature on the behavior of carbon fiber-reinforced T300/BMP350 unidirectional laminates was studied by loading static tensile on 0°, 90°and ±45° lay-up. The stress-strain relationships of the laminates under different temperatures were obtained. The effect of temperature on the mechanical properties of materials was systematically studied. The damage and failure mechanisms of the material were studied by analyzing the material stress-strain curves and the failure modes. Results show that the T300/BMP350 polyimide matrix composites have a strong resistance to high temperature. For 0° and 90° lay-up, the retentions of tensile strength and modulus are more than 80% and 50%, respectively. High temperature has little effect on the material failure modes. Finally, based on the test results, an empirical formula which relates strength and temperature of the material was fitted.

scholarly journals GERMINATION AND VIGOUR IN SEEDS OF THE COWPEA IN RESPONSE TO SALT AND HEAT STRESS

2019 ◽  
Vol 32 (1) ◽  
pp. 143-151 ◽  
Author(s):  
Luma Rayane de Lima Nunes ◽  
Paloma Rayane Pinheiro ◽  
Charles Lobo Pinheiro ◽  
Kelly Andressa Peres Lima ◽  
Alek Sandro Dutra
Keyword(s):  
Salt Stress ◽  
Heat Stress ◽  
High Temperature ◽  
Low Temperature ◽  
Vigna Unguiculata ◽  
Salt Concentration ◽  
Dry Weight ◽  
Germination Percentage ◽  
Different Types ◽  
Different Temperatures

ABSTRACT Salinity is prejudicial to plant development, causing different types of damage to species, or even between genotypes of the same species, with the effects being aggravated when combined with other types of stress, such as heat stress. The aim of this study was to evaluate the tolerance of cowpea genotypes (Vigna unguiculata L. Walp.) to salt stress at different temperatures. Seeds of the Pujante, Epace 10 and Marataoã genotypes were placed on paper rolls (Germitest®) moistened with different salt concentrations of 0.0 (control), 1.5, 3.0, 4.5 and 6.0 dS m-1, and placed in a germination chamber (BOD) at temperatures of 20, 25, 30 and 35°C. The experiment was conducted in a completely randomised design, in a 3 × 4 × 5 scheme of subdivided plots, with four replications per treatment. The variables under analysis were germination percentage, first germination count, shoot and root length, and total seedling dry weight. At temperatures of 30 and 35°C, increases in the salt concentration were more damaging to germination in the Epace 10 and Pujante genotypes, while for the Marataoã genotype, damage occurred at the temperature of 20°C. At 25°C, germination and vigour in the genotypes were higher, with the Pujante genotype proving to be more tolerant to salt stress, whereas Epace 10 and Marataoã were more tolerant to high temperatures. Germination in the cowpea genotypes was more sensitive to salt stress when subjected to heat stress caused by the low temperature of 20°C or high temperature of 35°C.

scholarly journals Experimental Investigation of Wave Velocity-Permeability Model for Granite Subjected to Different Temperature Processing

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Guanghui Jiang ◽  
Jianping Zuo ◽  
Teng Ma ◽  
Xu Wei
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Wave Velocity ◽  
Pore Fluid ◽  
Rock Matrix ◽  
Permeability Model ◽  
Wave Velocities ◽  
Before And After ◽  
Different Temperatures ◽  
Increasing Temperature

Understanding the change of permeability of rocks before and after heating is of great significance for exploitation of hydrocarbon resources and disposal of nuclear waste. The rock permeability under high temperature cannot be measured with most of the existing methods. In this paper, quality, wave velocity, and permeability of granite specimen from Maluanshan tunnel are measured after high temperature processing. Quality and wave velocity of granite decrease and permeability of granite increases with increasing temperature. Using porosity as the medium, a new wave velocity-permeability model is established with modified wave velocity-porosity formula and Kozeny-Carman formula. Under some given wave velocities and corresponding permeabilities through experiment, the permeabilities at different temperatures and wave velocities can be obtained. By comparing the experimental and the theoretical results, the proposed formulas are verified. In addition, a sensitivity analysis is performed to examine the effect of particle size, wave velocities in rock matrix, and pore fluid on permeability: permeability increases with increasing particle size, wave velocities in rock matrix, and pore fluid; the higher the rock wave velocity, the lower the effect of wave velocities in rock matrix and pore fluid on permeability.

A Method for Predicting the Behavior of Plastics at Different Temperatures

2014 ◽  
Vol 1039 ◽  
pp. 107-111
Author(s):  
Yang Chen ◽  
Gui Qin Li ◽  
Bin Ruan ◽  
Xiao Yuan ◽  
Hong Bo Li
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Constitutive Model ◽  
Research And Development ◽  
Mechanical Behavior ◽  
Plastic Material ◽  
Different Temperatures ◽  
Plastic Parts

The mechanical behavior of plastic material is dramatically sensitive to temperature. An method is proposed to predict the mechanical behavior of plastics for cars, ranging from low-temperature low temperature ≤-40°C to high temperature ≥80°C. It dominates the behavior of plastic material based on improved constitutive model in which the parameters adjusted by a series of tests under different temperatures. The method is validated with test and establishes the basis for research and development of plastic parts for automobile as well.

Experimental Research on Bond Strength between Rebar and Concrete after High Temperature

2011 ◽  
Vol 71-78 ◽  
pp. 1057-1061 ◽  
Author(s):  
Ke Fang Yin ◽  
Yang Han ◽  
Yi Liu
Keyword(s):  
Reinforced Concrete ◽  
High Temperature ◽  
Bond Strength ◽  
Experimental Research ◽  
Bonding Strength ◽  
Different Temperatures ◽  
Ultimate Bond Strength

With the centrally pulling-out test, the bond strength of reinforced concrete is measured with different temperatures and different cooling ways after high temperature; and the ultimate bond strength and slip of reinforced and concrete under different conditions are analyzed. The results show that the bonding strength declines gradually with the increase of temperature, and the ultimate slippage also decreases gradually.

scholarly journals Investigation of Fatigue Behavior of ABS and PC-ABS Polymers at Different Temperatures

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1818
Author(s):  
Andrea Mura ◽  
Alessando Ricci ◽  
Giancarlo Canavese
Keyword(s):  
High Temperature ◽  
Room Temperature ◽  
Working Condition ◽  
Fatigue Behavior ◽  
Polymeric Materials ◽  
Cyclic Loads ◽  
Structural Components ◽  
Working Temperature ◽  
Different Temperatures ◽  
Positive Effect

Plastics are widely used in structural components where cyclic loads may cause fatigue failure. In particular, in some applications such as in vehicles, the working temperature may change and therefore the strength of the polymeric materials. In this work, the fatigue behavior of two thermoplastic materials (ABS and PC-ABS) at different temperatures has been investigated. In particular, three temperatures have been considered representing the working condition at room temperature, at low temperature (winter conditions), and high temperature (summer conditions and/or components close to the engine). Results show that high temperature have big impact on fatigue performance, while low temperatures may also have a slight positive effect.

New Failure Mechanism in High Temperature Resin Materials

2018 ◽  
Author(s):  
Michael Guyenot ◽  
D. Maas ◽  
R. Ratchev ◽  
A. Khoshamouz ◽  
T. Gottwald ◽  
...  
Keyword(s):  
High Temperature ◽  
Failure Mechanism

scholarly journals LC/8YSZ TBCs Thermal Cycling Life and Failure Mechanism under Extreme Temperature Gradients

Coatings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1051
Author(s):  
Kun Liu ◽  
Xi Chen ◽  
Kangping Du ◽  
Yu Wang ◽  
Jinguang Du ◽  
...  
Keyword(s):  
High Temperature ◽  
Surface Temperature ◽  
Thermal Cycling ◽  
Thermal Shock ◽  
Failure Mechanism ◽  
Extreme Temperature ◽  
Temperature Gradients ◽  
Accelerated Life Test ◽  
Ceramic Layer ◽  
Cycling Life

The purpose of this paper is to study the thermal shock resistance and failure mechanism of La2Ce2O7/8YSZ double-ceramic-layer thermal barrier coatings (LC/8YSZ DCL TBCs) under extreme temperature gradients. At high surface temperatures, thermal shock and infrared temperature measuring modules were used to determine the thermal cycling life and insulation temperature of LC/8YSZ DCL TBCs under extreme temperature gradients by an oxygen–acetylene gas flame testing machine. A viscoelastic model was used to obtain the stress and strain law of solid phase sintering of a coating system using the finite element method. Results and Conclusion: (1) Thermal cycling life was affected by the surface temperature of LC/8YSZ DCL TBCs and decreased sharply with the increase of surface temperature. (2) The LC ceramic surface of the failure coating was sintered, and the higher the temperature, the faster the sintering process. (3) Accelerated life test results showed that high temperature thermal cycling life is not only related to thermal fatigue of ceramic layer, but is also related to the sintering degree of the coating. (4) Although the high temperature thermal stress had great influence on the coating, great sintering stress was produced with sintering of the LC ceramic layer, which is the main cause of LC/8YSZ DCL TBC failure. The above results indicate that for new TBC ceramic materials, especially those for engines above class F, their sinterability should be fully considered. Sintering affects the thermal shock properties at high temperature. Our research results can provide reference for material selection and high temperature performance research.

scholarly journals Conidia sporulation of Pyricularia oryzae in segments of wheat plants under six different temperatures

2020 ◽  
Vol 50 (4) ◽  
Author(s):  
Marcos Kovaleski ◽  
João Leodato Nunes Maciel ◽  
Gustavo Bilibio dos Santos ◽  
Alieze Nascimento da Silva ◽  
Carolina Cardoso Deuner
Keyword(s):  
High Temperature ◽  
Petri Dish ◽  
Pyricularia Oryzae ◽  
Causal Agent ◽  
Temperature Conditions ◽  
Wheat Blast ◽  
Conidia Production ◽  
Different Temperatures

ABSTRACT: Wheat blast is known for developing itself more intensely under relatively high temperature conditions but many aspects related to its epidemiology remain unknown. The objective of this research was to evaluate the sporulative capacity of Pyricularia oryzae Triticum (Pot), the causal agent of wheat blast, in tissues of wheat plants under different temperatures degrees. Wheat plants of the cultivar Anahuac 75, susceptible to blast, were inoculated in the stage of flowering with conidial suspensions (105 conidia/mL) of the Pot isolates Py 12.1.209 and Py 12.1.132. Seven days after the inoculation, plants were cut in the following segments: leaves, stems and rachis (with blast severity ranging from 40 to 60%). Groups of each one of the three plant segments with the lesions were disposed in Petri-dish moist chambers, that were submitted to six different temperature treatments (18, 21, 24, 27, 30 and 33 °C). The most appropriate model that related the conidia production with temperature was identified in the evaluations conducted with stems. The established equations allowed identifying that the highest production of conidia of Pot occurs between 24 and 27 °C.

scholarly journals Temperature Effects on Dormancy Completion of Vegetative Buds in Apple

2003 ◽  
Vol 128 (5) ◽  
pp. 636-641 ◽  
Author(s):  
Amos Naor ◽  
Moshe Flaishman ◽  
Raphael Stern ◽  
Aharon Moshe ◽  
Amnon Erez
Keyword(s):  
High Temperature ◽  
Dominance Effect ◽  
Chilling Temperature ◽  
Flower Buds ◽  
Diurnal Cycles ◽  
Relative Contribution ◽  
Vegetative Buds ◽  
Lateral Buds ◽  
Different Temperatures ◽  
Chilling Hours

The relative contribution of various temperatures to dormancy completion of lateral vegetative apple [Malus sylvestris (L.) Mill. var. domestica (Borkh.) Mansf.] buds was studied quantitatively on whole container-grown trees. Trees were exposed continuously to 10 different temperatures and also to daily alternating temperatures in a 24-hour cycle. In addition, fully chilled vertically and horizontally positioned shoots were compared under forcing conditions. No budbreak occurred in shoots chilled above 12.5 °C. There was a steep increase in budbreak as the chilling temperature fell from 12.5 to 7.5 °C. There was little difference in the level of budbreak on shoots chilled between 7.5 and 0 °C. The relative contribution of temperature to chilling accumulation in apple found in our study differs from what has been proposed for stone fruit and for apple in previous studies, especially at temperatures <6 °C. The length of exposure to forcing conditions required to initiate budbreak diminished as the chilling temperature was reduced. No additional bud-break was apparent on shoots chilled longer than 2100 chilling hours. The chilling requirement found here for lateral vegetative buds is much higher than that needed for terminal vegetative and flower buds. Trees that were exposed to daily alternating temperatures had lower levels of budbreak when the high temperature in the diurnal cycle was greater than 14 °C. Practically no budbreak was apparent on trees that were exposed to diurnal cycles with a high temperature of 20 °C for 8 hours. Budbreak on horizontally positioned trees was more than twice that on the vertically positioned trees, emphasizing the magnitude of the apical dominance effect and its strong masking of the chilling effect on lateral buds in vertically grown apple trees. Based on the data collected here we propose a new response curve for vegetative budbreak in `Golden Delicious·apple, within a temperature range between 0 to 15 °C.

Sign in / Sign up

Export Citation Format

Share Document