An adaptive stochastic resonance method based on grey wolf optimizer algorithm and its application to machinery fault diagnosis

2017 ◽  
Vol 71 ◽  
pp. 206-214 ◽  
Author(s):  
Xin Zhang ◽  
Qiang Miao ◽  
Zhiwen Liu ◽  
Zhengjia He
2019 ◽  
Vol 141 (4) ◽  
Author(s):  
Bingbing Hu ◽  
Chang Guo ◽  
Jimei Wu ◽  
Jiahui Tang ◽  
Jialing Zhang ◽  
...  

As a weak signal processing method that utilizes noise enhanced fault signals, stochastic resonance (SR) is widely used in mechanical fault diagnosis. However, the classic bistable SR has a problem with output saturation, which affects its ability to enhance fault characteristics. Moreover, it is difficult to implement SR when the fault frequency is not clear, which limits its application in engineering practice. To solve these problems, this paper proposed an adaptive periodical stochastic resonance (APSR) method based on the grey wolf optimizer (GWO) algorithm for rolling bearing fault diagnosis. The periodical stochastic resonance (PSR) model can independently adjust the system parameters and effectively avoid output saturation. The GWO algorithm is introduced to optimize the PSR model parameters to achieve adaptive detection of the input signal, and the output signal-to-noise ratio (SNR) is used as the objective function of the GWO algorithm. Simulated signals verify the validity of the proposed method. Furthermore, this method is applied to bearing fault diagnosis; experimental analysis demonstrates that the proposed method not only obtains a larger output SNR but also requires less time for the optimization process. The diagnosis results show that the proposed method can effectively enhance the weak fault signal and has strong practical values in engineering.


Symmetry ◽  
2019 ◽  
Vol 11 (8) ◽  
pp. 965 ◽  
Author(s):  
Lu Lu ◽  
Yu Yuan ◽  
Heng Wang ◽  
Xing Zhao ◽  
Jianjie Zheng

Vibration signals are used to diagnosis faults of the rolling bearing which is symmetric structure. Stochastic resonance (SR) has been widely applied in weak signal feature extraction in recent years. It can utilize noise and enhance weak signals. However, the traditional SR method has poor performance, and it is difficult to determine parameters of SR. Therefore, a new second-order tristable SR method (STSR) based on a new potential combining the classical bistable potential with Woods-Saxon potential is proposed in this paper. Firstly, the envelope signal of rolling bearings is the input signal of STSR. Then, the output of signal-to-noise ratio (SNR) is used as the fitness function of the Seeker Optimization Algorithm (SOA) in order to optimize the parameters of SR. Finally, the optimal parameters are used to set the STSR system in order to enhance and extract weak signals of rolling bearings. Simulated and experimental signals are used to demonstrate the effectiveness of STSR. The diagnosis results show that the proposed STSR method can obtain higher output SNR and better filtering performance than the traditional SR methods. It provides a new idea for fault diagnosis of rotating machinery.


Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4170 ◽  
Author(s):  
Bing Zeng ◽  
Jiang Guo ◽  
Wenqiang Zhu ◽  
Zhihuai Xiao ◽  
Fang Yuan ◽  
...  

Dissolved gas analysis (DGA) is a widely used method for transformer internal fault diagnosis. However, the traditional DGA technology, including Key Gas method, Dornenburg ratio method, Rogers ratio method, International Electrotechnical Commission (IEC) three-ratio method, and Duval triangle method, etc., suffers from shortcomings such as coding deficiencies, excessive coding boundaries and critical value criterion defects, which affect the reliability of fault analysis. Grey wolf optimizer (GWO) is a novel swarm intelligence optimization algorithm proposed in 2014 and it is easy for the original GWO to fall into the local optimum. This paper presents a new meta-heuristic method by hybridizing GWO with differential evolution (DE) to avoid the local optimum, improve the diversity of the population and meanwhile make an appropriate compromise between exploration and exploitation. A fault diagnosis model of hybrid grey wolf optimized least square support vector machine (HGWO-LSSVM) is proposed and applied to transformer fault diagnosis with the optimal hybrid DGA feature set selected as the input of the model. The kernel principal component analysis (KPCA) is used for feature extraction, which can decrease the training time of the model. The proposed method shows high accuracy of fault diagnosis by comparing with traditional DGA methods, least square support vector machine (LSSVM), GWO-LSSVM, particle swarm optimization (PSO)-LSSVM and genetic algorithm (GA)-LSSVM. It also shows good fitness and fast convergence rate. Accuracies calculated in this paper, however, are significantly affected by the misidentifications of faults that have been made in the DGA data collected from the literature.


2019 ◽  
Vol 26 (7) ◽  
pp. 1910-1920 ◽  
Author(s):  
Jin-tian Yin ◽  
Yong-fang Xie ◽  
Zhi-wen Chen ◽  
Tao Peng ◽  
Chun-hua Yang

2020 ◽  
Vol 53 (5-6) ◽  
pp. 767-777
Author(s):  
Xueping Ren ◽  
Jian Kang ◽  
Zhixing Li ◽  
Jianguo Wang

The early fault signal of rolling bearings is very weak, and when analyzed under strong background noise, the traditional signal processing method is not ideal. To extract fault characteristic information more clearly, the second-order UCPSR method is applied to the early fault diagnosis of rolling bearings. The continuous potential function itself is a continuous sinusoidal function. The particle transition is smooth and the output is better. Because of its three parameters, the potential structure is more comprehensive and has more abundant characteristics. When the periodic signal, noise and potential function are the best match, the system exhibits better denoise compared to that of other methods. This paper discusses the influence of potential parameters on the motion state of particles between potential wells in combination with the potential parameter variation diagrams discussed. Then, the formula of output signal-to-noise ratio is derived to further study the relationships among potential parameters, and then the ant colony algorithm is used to optimize potential parameters in order to obtain the optimal output signal-to-noise ratio. Finally, an early weak fault diagnosis method for bearings based on the underdamped continuous potential stochastic resonance model is proposed. Through simulation and experimental verification, the underdamped continuous potential stochastic resonance results are compared with those of the time-delayed feedback stochastic resonance method, which proves the validity of the underdamped continuous potential stochastic resonance method.


Sign in / Sign up

Export Citation Format

Share Document