Effective desalination of brackish groundwater using zeolitized diatomite/kaolinite geopolymer as low-cost inorganic membrane; Siwa Oasis in Egypt as a realistic case study

2021 ◽  
pp. 103923
Author(s):  
Mostafa R. Abukhadra ◽  
Mohamed Hamdy Eid ◽  
Ahmed M. El-Sherbeeny ◽  
Abd Elatty E. Abd Elgawad ◽  
Jae-Jin Shim
Keyword(s):  
Low Cost ◽  
Inorganic Membrane ◽  
Realistic Case

Low Temperature Fault Isolation Using Soft Defect Localization

2012 ◽  
Author(s):  
Kristopher D. Staller
Keyword(s):  
Low Temperatures ◽  
Laser Scanning ◽  
Low Cost ◽  
Fault Isolation ◽  
Laser Scanning Microscopy ◽  
Cold Temperature ◽  
Multiple Point ◽  
Defect Localization ◽  
Low Levels

Abstract Cold temperature failures are often difficult to resolve, especially those at extreme low levels (< -40°C). Momentary application of chill spray can confirm the failure mode, but is impractical during photoemission microscopy (PEM), laser scanning microscopy (LSM), and multiple point microprobing. This paper will examine relatively low-cost cold temperature systems that can hold samples at steady state extreme low temperatures and describe a case study where a cold temperature stage was combined with LSM soft defect localization (SDL) to rapidly identify the cause of a complex cold temperature failure mechanism.

scholarly journals A Regenerative Business Model with Flexible, Modular and Scalable Processes in A Post-Covid Era: The Case of The Spinning Mesh Disc Reactor (SMDR)

2021 ◽  
Vol 13 (12) ◽  
pp. 6944
Author(s):  
Emma Anna Carolina Emanuelsson ◽  
Aurelie Charles ◽  
Parimala Shivaprasad
Keyword(s):  
Business Model ◽  
Low Cost ◽  
Sustainable Manufacturing ◽  
Sustainable Business ◽  
Capital Costs ◽  
Implementing Change ◽  
Chemical Manufacturing ◽  
Manufacturing Techniques ◽  
Flexible Operation

With stringent environmental regulations and a new drive for sustainable manufacturing, there is an unprecedented opportunity to incorporate novel manufacturing techniques. Recent political and pandemic events have shown the vulnerability to supply chains, highlighting the need for localised manufacturing capabilities to better respond flexibly to national demand. In this paper, we have used the spinning mesh disc reactor (SMDR) as a case study to demonstrate the path forward for manufacturing in the post-Covid world. The SMDR uses centrifugal force to allow the spread of thin film across the spinning disc which has a cloth with immobilised catalyst. The modularity of the design combined with the flexibility to perform a range of chemical reactions in a single equipment is an opportunity towards sustainable manufacturing. A global approach to market research allowed us to identify sectors within the chemical industry interested in novel reactor designs. The drivers for implementing change were identified as low capital cost, flexible operation and consistent product quality. Barriers include cost of change (regulatory and capital costs), limited technical awareness, safety concerns and lack of motivation towards change. Finally, applying the key features of a Sustainable Business Model (SBM) to SMDR, we show the strengths and opportunities for SMDR to align with an SBM allowing for a low-cost, sustainable and regenerative system of chemical manufacturing.

scholarly journals Comparative Analysis of Low-Cost GNSS OEM Board K706 AND BX316 (Case Study: Bulusidokare Village Sidoarjo Regency)

2021 ◽  
Vol 731 (1) ◽  
pp. 012024
Author(s):  
M N Cahyadi ◽  
E Y Handoko ◽  
R Mardiyanto ◽  
I M Anjasmara ◽  
Khomsin ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Low Cost

MECHANIZATION OF POTATO GRADING ON SMALL-SCALE FARMS: A CASE STUDY FROM PERU

2005 ◽  
Vol 41 (1) ◽  
pp. 81-92 ◽  
Author(s):  
G. P. BUTLER ◽  
T. BERNET ◽  
K. MANRIQUE
Keyword(s):  
Developing Countries ◽  
Market Integration ◽  
Low Cost ◽  
Farming System ◽  
Agricultural Products ◽  
Small Scale ◽  
Critical Aspect ◽  
Small Scale Farmers ◽  
Important Cash Crop

Potatoes are an important cash crop for small-scale producers worldwide. The move away from subsistence to commercialized farming, combined with the rapid growth in demand for processed agricultural products in developing countries, implies that small-scale farmers and researchers alike must begin to respond to these market changes and consider post-harvest treatment as a critical aspect of the potato farming system. This paper presents and assesses a low cost potato-grading machine that was designed explicitly to enable small-scale potato growers to sort tubers by size for supply to commercial processors. The results of ten experiments reveal that the machine achieves an accuracy of sort similar to commercially available graders. The machine, which uses parallel conical rollers, has the capacity to grade different tuber shapes and to adjust sorting classes, making it suitable for locations with high potato diversity. Its relatively low cost suggests that an improved and adapted version of this machine might enhance market integration of small-scale potato producers not only in Peru, but in other developing countries as well.

scholarly journals Sustainable agriculture: The study on farmers’ perception and practices regarding nutrient management and limiting losses

2018 ◽  
Vol 36 (1) ◽  
pp. 67-75 ◽  
Author(s):  
Barbara Kiełbasa ◽  
Stefan Pietrzak ◽  
Barbro Ulén ◽  
Jan-Olof Drangert ◽  
Karin Tonderski
Keyword(s):  
Sustainable Agriculture ◽  
Nutrient Management ◽  
Low Cost ◽  
Agricultural Practices ◽  
Farm Management ◽  
General Idea ◽  
Limiting Nutrient ◽  
Scientific Project ◽  
Sustainable Agricultural Practices

AbstractThe paper presents the results of a scientific project focused on limiting nutrient losses from farms by introducing measures to apply fertilizers in a more sustainable way. It is a case study of selected aspects of farm management, focussing on the issue of sustainable agriculture and their tools. The main aim of the study was to analyse and evaluate farmers’ knowledge of the fertilizing process and its aspects, as well as applying sustainable agricultural activities on farms. The study emphasised the importance of nutrient management, as very important for sustainable farming. Also, the links between farmers’ opinions and their activities were analysed. The important issue concerned measures for sustainable farm management introduced on the farms, as well as measures to limit nutrient leaching into groundwater. Twenty-eight farmers from two regions in Poland were interviewed about their perceptions for the case study. In general, the farmers considered their farm activities to be more sustainable than in the past. They demonstrated an understanding of the general idea of sustainable agriculture. However, many farmers still demonstrated a poor grasp of nutrient flows and nutrient balances on farms. Their knowledge and perception was based on general, rather than specific knowledge gleaned from an academic/vocational course. The farmers demonstrated a realization that there were some new, or low-cost measures that could be introduced to make management more sustainable and pro-environmental, but there was still a need for wider adoption of sustainable agricultural practices.

scholarly journals Improving the Downwind Sail Design Process by Means of a Novel FSI Approach

2021 ◽  
Vol 9 (6) ◽  
pp. 624
Author(s):  
Antonino Cirello ◽  
Tommaso Ingrassia ◽  
Antonio Mancuso ◽  
Vincenzo Nigrelli ◽  
Davide Tumino
Keyword(s):  
Numerical Methods ◽  
Low Cost ◽  
The Novel ◽  
The Real ◽  
Weakly Coupled ◽  
Design And Manufacturing ◽  
Sailing Yacht ◽  
Computational Resources ◽  
Effective Use

The process of designing a sail can be a challenging task because of the difficulties in predicting the real aerodynamic performance. This is especially true in the case of downwind sails, where the evaluation of the real shapes and aerodynamic forces can be very complex because of turbulent and detached flows and the high-deformable behavior of structures. Of course, numerical methods are very useful and reliable tools to investigate sail performances, and their use, also as a result of the exponential growth of computational resources at a very low cost, is spreading more and more, even in not highly competitive fields. This paper presents a new methodology to support sail designers in evaluating and optimizing downwind sail performance and manufacturing. A new weakly coupled fluid–structure interaction (FSI) procedure has been developed to study downwind sails. The proposed method is parametric and automated and allows for investigating multiple kinds of sails under different sailing conditions. The study of a gennaker of a small sailing yacht is presented as a case study. Based on the numerical results obtained, an analytical formulation for calculating the sail corner loads has been also proposed. The novel proposed methodology could represent a promising approach to allow for the widespread and effective use of numerical methods in the design and manufacturing of yacht sails.

scholarly journals Optimal Design Strategy of a Solar Reflector Combining Photovoltaic Panels to Improve Electricity Output: A Case Study in Calgary, Canada

2021 ◽  
Vol 13 (11) ◽  
pp. 6115
Author(s):  
Moon Keun Kim ◽  
Khalid Osman Abdulkadir ◽  
Jiying Liu ◽  
Joon-Ho Choi ◽  
Huiqing Wen
Keyword(s):  
Solar Radiation ◽  
Electricity Generation ◽  
Low Cost ◽  
Design Strategy ◽  
Numerical Approach ◽  
Optimal Shape ◽  
Energy Technology ◽  
Experimental Database ◽  
Pv Panel

This study explores the combination of photovoltaic (PV) panels with a reflector mounted on a building to improve electricity generation. Globally, PV panels have been widely used as a renewable energy technology. In order to obtain more solar irradiance and improve electricity output, this study presents an advanced strategy of a reflector combining PV panels mounted on a building in Calgary, Canada. Based on an experimental database of solar irradiances, the simulation presents an optimal shape designed and tilt angles of the reflector and consequently improves solar radiation gain and electricity outputs. Polished aluminum is selected as the reflector material, and the shape and angle are designed to minimize the interruption of direct solar radiation. The numerical approach demonstrates the improvement in performance using a PV panel tilted at 30°, 45°, 60°, and 75° and a reflector, tilted at 15.5° or allowed to be tilted flexibly. A reflector tilted at 15.5° can improve solar radiation gains, of the panel, by nearly 5.5–9.2% at lower tilt angles and 14.1–21.1% at higher tilt angles. Furthermore, the flexibly adjusted reflector can improve solar radiation gains on the PV panel, by nearly 12–15.6% at lower tilt angles and 20–26.5% at higher tilt angles. A reflector tilted at 15.5° improves the panel’s output electricity on average by 4–8% with the PV panel tilted at 30° and 45° respectively and 12–19 % with the PV panel tilted at 60° and 75°, annually. Moreover, a reflector that can be flexibly tilted improves electricity output on average by 9–12% with the PV panel tilted at 30° and 45° and 17–23% with the PV panel tilted at 60° and 75°. Therefore, the utilization of a reflector improves the performance of the PV panel while incurring a relatively low cost.

Sign in / Sign up

Export Citation Format

Share Document