Hydrogen phosphate anions modified hydrogen titanate nanotubes for methylene blue adsorption from aqueous solution: Validating novel method of predicting adsorption capacity

2016 ◽  
Vol 4 (1) ◽  
pp. 1295-1307 ◽  
Author(s):  
Manu Jose ◽  
N. Harsha ◽  
K. Suhailath ◽  
A. Peer Mohamed ◽  
Satyajit Shukla
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Titanate Nanotubes ◽  
Hydrogen Phosphate ◽  
Methylene Blue Adsorption ◽  
Novel Method ◽  
Hydrogen Titanate ◽  
Phosphate Anions

Synthesis and characterization of pecan nutshell-based adsorbent with high specific area and high methylene blue adsorption capacity

2019 ◽  
Vol 276 ◽  
pp. 570-576 ◽  
Author(s):  
Hugo H.C. Lima ◽  
Rogério S. Maniezzo ◽  
Maria E.G. Llop ◽  
Vincente L. Kupfer ◽  
Pedro A. Arroyo ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Specific Area ◽  
Synthesis And Characterization ◽  
Methylene Blue Adsorption ◽  
Pecan Nutshell ◽  
High Specific Area

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

scholarly journals Effect of synthesis conditions  on  methylene blue adsorption capacity of electrochemically preparated graphene

2020 ◽  
Vol 9 (3) ◽  
pp. 9-14
Author(s):  
Hao Pham Van ◽  
Linh Ha Xuan ◽  
Oanh Phung Thi ◽  
Hong Phan Ngoc ◽  
Huy Nguyen Nhat ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Graphene Nanosheets ◽  
Electrochemical Exfoliation ◽  
X Ray ◽  
Synthesis Conditions ◽  
Mb Adsorption

This report presents the effect of synthesis conditions on the synthesis of graphene nanosheets via electrochemical exfoliation method for adsorbing methylene blue from aqueous solution. Oxygen-containing functional groups and defects in the material were characterized by Raman and X-ray photoelectron spectroscopy (XPS). As a result, by using voltage of 15 V, (NH4)2SO4 (5%, 250 mL) and KOH (7.5%, 250 mL), the obtained material showed the highest MB adsorption capacity due to the high densities of oxygen-containing groups and defects comparison to other conditions.

Preparation and Adsorption Properties of Starch-g-Polyacrylamide/Montmorillonite Nanocomposites

2015 ◽  
Vol 1120-1121 ◽  
pp. 343-346
Author(s):  
Cai Ning Zhang ◽  
Xu Man Wang
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Crosslinking Agent ◽  
Adsorption Properties ◽  
Experimental Results ◽  
Solution Polymerization ◽  
Preparation Conditions ◽  
Montmorillonite Nanocomposites

By means of solution polymerization, a series of cross-linked starch-g-polyacrylamide/ montmorillonite (St-g-PAM/MMT) nanocomposites were prepared and used to adsorb methylene blue (MB). The effects of different preparation conditions on the adsorption capacity of the nanocomposites were investigated. The experimental results demonstrated that the prepared St-g-PAM/MMT nanocomposites were effective adsorbents for removal of MB from aqueous solution. Furthermore, adsorption capacity increased with the MMT contents up to 14% and decreased as the MMT contents further increased. Adsorption capacity increased with the increasing of the ratio of starch to acrylamide, whereas adsorption capacity decreased with the increasing of crosslinking agent contents.

Characterization of Adsorbents Derived from Palm Fiber Waste and its Potential on Methylene Blue Adsorption

2020 ◽  
Vol 841 ◽  
pp. 273-277
Author(s):  
Ariany Zulkania ◽  
Muhammad Iqbal ◽  
Syamsumarlin
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Phosphoric Acid ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Methylene Blue Adsorption ◽  
Palm Fiber ◽  
Methylene Blue Removal ◽  
Phosphoric Acid Concentration

In this study, two types of adsorbent including activated carbon and bio-sorbent were produced from Palm fiber wastes (PFW), which were activated by phosphoric acid. The influence of adsorbent type and phosphoric acid concentration on methylene blue adsorption was investigated. The most optimum adsorbent was determined based on adsorption capacity and removal percentage of each adsorbent. The result shows that 9.984 mg/g of adsorption capacity and 99.84% of removal percentage were achieved in 90 minutes’ adsorption, which demonstrates the huge potential of bio-sorbent and was chosen to be the most optimum adsorbent based on methylene blue removal. The characterization of bio-sorbent was then investigated using FTIR and SEM. FTIR result shows that bio-sorbent contains cellulose which affected the adsorption process while SEM result shows the cleaner pores and surface compared to bio-sorbent before activation.

scholarly journals Acetone fractionation: a simple and efficient method to improve the performance of lignin for dye pollutant removal

RSC Advances ◽  
2019 ◽  
Vol 9 (61) ◽  
pp. 35895-35903
Author(s):  
Hao Li ◽  
Ze Yuan ◽  
Yuyu Xing ◽  
Jiarong Li ◽  
Jing Fang ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Efficient Method ◽  
Pollutant Removal ◽  
Cationic Dye ◽  
Acetone Fractionation

In this work, it was found that the adsorption capacity of lignin to cationic dye (methylene blue, MB) from aqueous solution could be significantly improved by simple acetone fractionation.

scholarly journals Investigation of methylene blue adsorption capacity of porous chitosan particles

2020 ◽  
Vol 2 (SI2) ◽  
pp. First
Author(s):  
Trần Quang Ngọc ◽  
Hoang Thi Trang Nguyen ◽  
Vo Nhat Thang
Keyword(s):  
Methylene Blue ◽  
Porous Structure ◽  
Adsorption Capacity ◽  
Textile Industry ◽  
Great Influence ◽  
Sio2 Nanoparticles ◽  
Desorption Process ◽  
Methylene Blue Adsorption ◽  
Porous Chitosan ◽  
Naoh Solution

Chitosan obtained from shrimp shells and SiO2 nanoparticles obtained from rice husk ash were used to synthesize chitosan - SiO2 composite materials. In order to obtain a porous chitosan adsorbent, the SiO2 particles in the chitosan - SiO2 composite material were removed with NaOH solution. With the orientation of applying adsorbent in wastewater treatment of textile industry, the ability of methylene blue adsorption of chitosan with porous structure has been investigated. Survey results show that chitosan has porous structure with good adsorption capacity of methylene blue. The adsorption capacity of materials depends on many factors such as: structure of particles; pH of adsorption medium and temperature. Adsorbent material is made of composite chitosan - SiO2 with the ratio of chitosan/SiO2 equal to 1/1 (w/w) with the best adsorption capacity. Materials with good adsorption capacity at pH = 6, at low pH, the adsorption capacity of the material is significantly reduced. Temperature has a great influence on the adsorption capacity of the material. The suitable temperature for adsorption of materials is 40 oC. With a higher temperature, the desorption process will be accelerated. This makes the adsorption capacity of the material decrease. The maximum methylene blue adsorption capacity of the material is determined about 7.25 mg/g after 40 minutes of adsorption time.

Sign in / Sign up

Export Citation Format

Share Document