scholarly journals Impacts of process-induced porosity on material properties of copper made by binder jetting additive manufacturing

2019 ◽  
Vol 182 ◽  
pp. 108001 ◽  
Author(s):  
Ashwath Yegyan Kumar ◽  
Jue Wang ◽  
Yun Bai ◽  
Scott T. Huxtable ◽  
Christopher B. Williams
Keyword(s):  
Additive Manufacturing ◽  
Material Properties ◽  
Binder Jetting

Binder Jetting Additive Manufacturing of Ceramics: A Literature Review

2017 ◽  
Author(s):  
Wenchao Du ◽  
Xiaorui Ren ◽  
Chao Ma ◽  
Zhijian Pei
Keyword(s):  
Additive Manufacturing ◽  
Literature Review ◽  
Process Parameters ◽  
Material Properties ◽  
Raw Materials ◽  
High Hardness ◽  
Ceramic Materials ◽  
Future Research ◽  
Binder Jetting ◽  
Resultant Material

Ceramic materials are more difficult to process than metals and polymers using additive manufacturing technologies because of their high melting temperature, high hardness and brittleness. Binder jetting additive manufacturing has been used to fabricate ceramic parts for various applications. This paper presents a literature review on recent advances in ceramic binder jetting. The paper begins with listing applications and material properties investigated in reported studies followed by the effects of raw materials and process parameters on resultant material properties. Raw materials include binder (material, application method, concentration, and saturation) and ceramic feedstock (preparation method, quality metrics, and particle size and shape), and process parameters include layer thickness and postprocessing method. Resultant material properties of interest include density, strength, hardness, and toughness. This review will provide guidance for the selection of raw materials and process parameters to obtain desired material properties for various applications. This paper is concluded by proposing future research directions.

scholarly journals 3D Plotting of Silica/Collagen Xerogel Granules in an Alginate Matrix for Tissue-Engineered Bone Implants

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 830
Author(s):  
Sina Rößler ◽  
Andreas Brückner ◽  
Iris Kruppke ◽  
Hans-Peter Wiesmann ◽  
Thomas Hanke ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Bone Regeneration ◽  
Material Properties ◽  
Viscoelastic Properties ◽  
Viscoelastic Behavior ◽  
Matrix Phase ◽  
Patient Specific ◽  
Active Player ◽  
Alginate Concentration ◽  
Alginate Matrix

Today, materials designed for bone regeneration are requested to be degradable and resorbable, bioactive, porous, and osteoconductive, as well as to be an active player in the bone-remodeling process. Multiphasic silica/collagen Xerogels were shown, earlier, to meet these requirements. The aim of the present study was to use these excellent material properties of silica/collagen Xerogels and to process them by additive manufacturing, in this case 3D plotting, to generate implants matching patient specific shapes of fractures or lesions. The concept is to have Xerogel granules as active major components embedded, to a large proportion, in a matrix that binds the granules in the scaffold. By using viscoelastic alginate as matrix, pastes of Xerogel granules were processed via 3D plotting. Moreover, alginate concentration was shown to be the key to a high content of irregularly shaped Xerogel granules embedded in a minimum of matrix phase. Both the alginate matrix and Xerogel granules were also shown to influence viscoelastic behavior of the paste, as well as the dimensionally stability of the scaffolds. In conclusion, 3D plotting of Xerogel granules was successfully established by using viscoelastic properties of alginate as matrix phase.

scholarly journals Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals

2017 ◽  
Vol 139 (8) ◽  
Author(s):  
Yun Bai ◽  
Grady Wagner ◽  
Christopher B. Williams
Keyword(s):  
Particle Size ◽  
Additive Manufacturing ◽  
Large Degree ◽  
Full Density ◽  
Powder Particle Size ◽  
Powder Mixtures ◽  
Fine Powders ◽  
Sintering Shrinkage ◽  
The Impact ◽  
Binder Jetting

The binder jetting additive manufacturing (AM) process provides an economical and scalable means of fabricating complex parts from a wide variety of materials. While it is often used to fabricate metal parts, it is typically challenging to fabricate full density parts without large degree of sintering shrinkage. This can be attributed to the inherently low green density and the constraint on powder particle size imposed by challenges in recoating fine powders. To address this issue, the authors explored the use of bimodal powder mixtures in the context of binder jetting of copper. A variety of bimodal powder mixtures of various particle diameters and mixing ratios were printed and sintered to study the impact of bimodal mixtures on the parts' density and shrinkage. It was discovered that, compared to parts printed with monosized fine powders, the use of bimodal powder mixtures improves the powder's packing density (8.2%) and flowability (10.5%), and increases the sintered density (4.0%) while also reducing the sintering shrinkage (6.4%).

scholarly journals Mechanics of the small punch test: a review and qualification of additive manufacturing materials

2021 ◽  
Vol 56 (18) ◽  
pp. 10707-10744
Author(s):  
Jonathan Torres ◽  
Ali P. Gordon
Keyword(s):  
Additive Manufacturing ◽  
Material Properties ◽  
Materials Science ◽  
Contemporary Literature ◽  
The Body ◽  
Small Punch Test ◽  
Small Punch ◽  
Punch Test ◽  
Testing Data ◽  
The Relationship

AbstractThe small punch test (SPT) was developed for situations where source material is scarce, costly or otherwise difficult to acquire, and has been used for assessing components with variable, location-dependent material properties. Although lacking standardization, the SPT has been employed to assess material properties and verified using traditional testing. Several methods exist for equating SPT results with traditional stress–strain data. There are, however, areas of weakness, such as fracture and fatigue approaches. This document outlines the history and methodologies of SPT, reviewing the body of contemporary literature and presenting relevant findings and formulations for correlating SPT results with conventional tests. Analysis of literature is extended to evaluating the suitability of the SPT for use with additively manufactured (AM) materials. The suitability of this approach is shown through a parametric study using an approximation of the SPT via FEA, varying material properties as would be seen with varying AM process parameters. Equations describing the relationship between SPT results and conventional testing data are presented. Correlation constants dictating these relationships are determined using an accumulation of data from the literature reviewed here, along with novel experimental data. This includes AM materials to assess the fit of these and provide context for a wider view of the methodology and its interest to materials science and additive manufacturing. A case is made for the continued development of the small punch test, identifying strengths and knowledge gaps, showing need for standardization of this simple yet highly versatile method for expediting studies of material properties and optimization.

scholarly journals Effects of Positioning Conditions on Material Properties In Powder bed Fusion Additive Manufacturing

2021 ◽  
Author(s):  
Mevlüt Yunus Kayacan ◽  
Nihat Yılmaz
Keyword(s):  
Additive Manufacturing ◽  
Material Properties ◽  
Layer By Layer ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Cooling Rates ◽  
Powder Bed ◽  
Manufacturing Technologies ◽  
Average Size ◽  
Hardness Values

Abstract Among additive manufacturing technologies, Laser Powder Bed Fusion (L-PBF) is considered the most widespread layer-by-layer process. Although the L-PBF, which is also called as SLM method, has many advantages, several challenging problems must be overcome, including part positioning issues. In this study, the effect of part positioning on the microstructure of the part in the L-PBF method was investigated. Five Ti6Al4V samples were printed in different positions on the building platform and investigated with the aid of temperature, porosity, microstructure and hardness evaluations. In this study, martensitic needles were detected within the microstructure of Ti6Al4V samples. Furthermore, some twins were noticed on primary martensitic lines and the agglomeration of β precipitates was observed in vanadium rich areas. The positioning conditions of samples were revealed to have a strong effect on temperature gradients and on the average size of martensitic lines. Besides, different hardness values were attained depending on sample positioning conditions. As a major result, cooling rates were found related to positions of samples and the location of point on the samples. Higher cooling rates and repetitive cooling cycles resulted in microstructures becoming finer and harder.

Sign in / Sign up

Export Citation Format

Share Document