Enhanced membrane biofouling potential by on-line chemical cleaning in membrane bioreactor

2016 ◽  
Vol 511 ◽  
pp. 84-91 ◽  
Author(s):  
Weiwei Cai ◽  
Yu Liu
Keyword(s):  
Membrane Bioreactor ◽  
Chemical Cleaning ◽  
Membrane Biofouling ◽  
On Line

scholarly journals UV and bacteriophages as a chemical-free approach for cleaning membranes from anaerobic bioreactors

2020 ◽  
Author(s):  
Giantommaso Scarascia ◽  
Luca Fortunato ◽  
Yevhen Myshkevych ◽  
Hong Cheng ◽  
TorOve Leiknes ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Bioreactor ◽  
Combined Treatment ◽  
Chemical Cleaning ◽  
High Quality ◽  
Anaerobic Membrane Bioreactor ◽  
Membrane Biofouling ◽  
Uv C

ABSTRACTAnaerobic membrane bioreactor (AnMBR) for wastewater treatment has attracted much interest due to its efficacy in providing high quality effluent with minimal energy costs. However, membrane biofouling represents the main bottleneck for AnMBR because it diminishes flux and necessitates frequent replacement of membranes. In this study, we assessed the feasibility of combining bacteriophages and UV-C irradiation to provide a chemical-free approach to remove biofoulants on the membrane. The combination of bacteriophage and UV-C resulted in better log cells removal and twice higher extracellular polymeric substance (EPS) concentration reduction in mature biofoulants compared to UV-C. A reduction in the relative abundance of Acinetobacter spp. and selected gram-positive bacteria associated with the membrane biofilm was also achieved by the new cleaning approach. Microscopic analysis further revealed the formation of cavities in the biofilm due to bacteriophages and UV-C irradiation, which would be beneficial to maintain water flux through the membrane. When the combined treatment was further compared with the common chemical cleaning procedure, a similar reduction on the cell numbers was observed (1.4 log). However, combined treatment was less effective in removing EPS compared with chemical cleaning. These results suggest that the combination of UV-C and bacteriophage have an additive effect in biofouling reduction, representing a potential chemical-free method to remove reversible biofoulants on membrane fitted in an anaerobic membrane bioreactor.SIGNIFICANCEAnaerobic membrane bioreactors can achieve high quality effluent with a reduced energy consumption. However, biofouling represents the main bottleneck for membrane filtration efficiency. Biofouling is commonly reduced through chemical treatment. These agents are often detrimental for the environment and health safety due to the formation of toxic byproducts. Therefore, we present a new approach, based on the additive antifouling action of bacteriophages infection and UV-C irradiation, to reduce anaerobic membrane biofouling. This new strategy could potentially delay the occurrence of membrane fouling by removing the reversible fouling layers on membranes, in turn reducing the frequencies and amount of chemicals needed throughout the course of wastewater treatment.

scholarly journals Application of cell entrapping beads for Quorum Quenching technique in submerged membrane bioreactor

2020 ◽  
Vol 81 (4) ◽  
pp. 744-752
Author(s):  
S. Ahmed ◽  
S. Chung ◽  
N. Sohail ◽  
I. A. Qazi ◽  
A. Justin
Keyword(s):  
Sodium Alginate ◽  
Biofilm Formation ◽  
Membrane Bioreactor ◽  
Membrane Surface ◽  
Quorum Quenching ◽  
Chemical Cleaning ◽  
Submerged Membrane Bioreactor ◽  
Membrane Biofouling ◽  
Market Disruption ◽  
Physical And Chemical

Abstract Biofouling is unwanted accumulation of microbial population on the membrane surface which limits the use of membrane bioreactor (MBR) in the market. Disruption of the biofilm formation by Quorum Quenching (QQ) by using cell entrapping beads (CEBs) is an approach with great potential to control membrane biofouling as the beads used provide not only mitigating effect on biofilm formation, by interfering Quorum Sensing, but also physical forces to detach the biofilm from the membrane surface. This research aimed to develop QQ-CEB with locally available chemicals in Pakistan and its application to evaluate the QQ effect together with physical and chemical cleaning. Various CEBs were made of different mixtures of sodium alginate and polyvinyl alcohol (PVA) and their quality was tested considering physical and biological aspects. Rhodococcus sp. BH4 and Pseudomonas putida were entrapped in the CEBs and then introduced in MBR as one of biofouling control methods along with standard backwash and chemical backwash. The CEBs made of specific concentration of PVA were proven to be more durable and helpful in mitigating biofouling as compared to that of sodium alginate. An MBR operated with PVA-alginate QQ CEBs together with chemical backwash showed the best performance without deterioration of effluent quality.

scholarly journals UV and bacteriophages as a chemical-free approach for cleaning membranes from anaerobic bioreactors

2021 ◽  
Vol 118 (37) ◽  
pp. e2016529118
Author(s):  
Giantommaso Scarascia ◽  
Luca Fortunato ◽  
Yevhen Myshkevych ◽  
Hong Cheng ◽  
TorOve Leiknes ◽  
...  
Keyword(s):  
Membrane Bioreactor ◽  
Combined Treatment ◽  
Water Flux ◽  
Energy Costs ◽  
Chemical Cleaning ◽  
Similar Reduction ◽  
Anaerobic Bioreactors ◽  
Membrane Biofouling ◽  
The Common ◽  
Uv C

Anaerobic membrane bioreactor (AnMBR) for wastewater treatment has attracted much interest due to its efficacy in providing high-quality effluent with minimal energy costs. However, membrane biofouling represents the main bottleneck for AnMBR because it diminishes flux and necessitates frequent replacement of membranes. In this study, we assessed the feasibility of combining bacteriophages and UV-C irradiation to provide a chemical-free approach to remove biofoulants on the membrane. The combination of bacteriophage and UV-C resulted in better log cells removal and ca. 2× higher extracellular polymeric substance (EPS) concentration reduction in mature biofoulants compared to either UV-C or bacteriophage alone. The cleaning mechanism behind this combined approach is by 1) reducing the relative abundance of Acinetobacter spp. and selected bacteria (e.g., Paludibacter, Pseudomonas, Cloacibacterium, and gram-positive Firmicutes) associated with the membrane biofilm and 2) forming cavities in the biofilm to maintain water flux through the membrane. When the combined treatment was further compared with the common chemical cleaning procedure, a similar reduction on the cell numbers was observed (1.4 log). However, the combined treatment was less effective in removing EPS compared with chemical cleaning. These results suggest that the combination of UV-C and bacteriophage have an additive effect in biofouling reduction, representing a potential chemical-free method to remove reversible biofoulants on membrane fitted to an AnMBR.

Nitrogen Removal in a Real-Time Controlled Sequencing Batch Membrane Bioreactor

2010 ◽  
Vol 5 (3) ◽  
Author(s):  
Cheng-Nan Chang ◽  
Li-Ling Lee ◽  
Han-Hsien Huang ◽  
Ying-Chih Chiu
Keyword(s):  
Real Time ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Synthetic Wastewater ◽  
Real Time Control ◽  
Time Control ◽  
Cake Layer ◽  
On Line ◽  
Solid Liquid ◽  
Solid Liquid Separation

The performance of a real-time controlled Sequencing Batch Membrane Bioreactor (SBMBR) for removing organic matter and nitrogen from synthetic wastewater has been investigated in this study under two specific ammonia loadings of 0.0086 and 0.0045g NH4+-N gVSS−1 day−1. Laboratory results indicate that both COD and DOC removal are greater than 97.5% (w/w) but the major benefit of using membrane for solid-liquid separation is that the effluent can be decanted through the membrane while aeration is continued during the draw stage. With a continued aeration, the sludge cake layer is prevented from forming thus alleviating the membrane clogging problem in addition to significant nitrification activities observed in the draw stage. With adequate aeration in the oxic stage, the nitrogen removal efficiency exceeding 99% can be achieved with the SBMBR system. Furthermore, the SBMBR system has also been used to study the occurrence of ammonia valley and nitrate knee that can be used for real-time control of the biological process. Under appropriate ammonia loading rates, applicable ammonia valley and nitrate knee are detected. The real-time control of the SBMBR can be performed based on on-line ORP and pH measurements.

Kinetic evaluation of nitrification performance in an immobilized cell membrane bioreactor

2016 ◽  
Vol 73 (12) ◽  
pp. 2904-2912 ◽  
Author(s):  
D. Güven ◽  
E. Ubay Çokgör ◽  
S. Sözen ◽  
D. Orhon
Keyword(s):  
Residence Time ◽  
Retention Time ◽  
Model Calibration ◽  
Membrane Bioreactor ◽  
Hydraulic Retention Time ◽  
Membrane Bioreactors ◽  
High Rate ◽  
Immobilized Cell ◽  
Chemical Cleaning ◽  
Kinetic Evaluation

Abstract High rate membrane bioreactor (MBR) systems operated at extremely low sludge ages (superfast membrane bioreactors (SFMBRs)) are inefficient to achieve nitrogen removal, due to insufficient retention time for nitrifiers. Moreover, frequent chemical cleaning is required due to high biomass flux. This study aims to satisfy the nitrification in SFMBRs by using sponge as carriers, leading to the extension of the residence time of microorganisms. In order to test the limits of nitrification, bioreactor was run under 52, 5 and 2 days of carrier residence time (CRT), with a hydraulic retention time of 6 h. Different degrees of nitrification were obtained for different CRTs. Sponge immobilized SFMBR operation with short CRT resulted in partial nitrification indicating selective dominancy of ammonia oxidizers. At higher CRT, simultaneous nitrification–denitrification was achieved when accompanying with oxygen limitation. Process kinetics was determined through evaluation of the results by a modeling study. Nitrifier partition in the reactor was also identified by model calibration.

scholarly journals Optimization of In Situ Backwashing Frequency for Stable Operation of Anaerobic Ceramic Membrane Bioreactor

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 545 ◽  
Author(s):  
Rathmalgodage Thejani Nilusha ◽  
Tuo Wang ◽  
Hongyan Wang ◽  
Dawei Yu ◽  
Junya Zhang ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Membrane Bioreactor ◽  
Ceramic Membrane ◽  
Pure Water ◽  
Ex Situ ◽  
Stable Operation ◽  
Chemical Cleaning ◽  
Cake Layer

The cost-effective and stable operation of an anaerobic ceramic membrane bioreactor (AnCMBR) depends on operational strategies to minimize membrane fouling. A novel strategy for backwashing, filtration and relaxation was optimized for stable operation of a side stream tubular AnCMBR treating domestic wastewater at the ambient temperature. Two in situ backwashing schemes (once a day at 60 s/day, and twice a day at 60 s × 2/day) maintaining 55 min filtration and 5 min relaxation as a constant were compared. A flux level over 70% of the initial membrane flux was stabilized by in situ permeate backwashing irrespective of its frequency. The in situ backwashing by permeate once a day was better for energy saving, stable membrane filtration and less permeate consumption. Ex situ chemical cleaning after 60 days’ operation was carried out using pure water, sodium hypochlorite (NaOCl), and citric acid as the order. The dominant cake layer was effectively reduced by in situ backwashing, and the major organic foulants were fulvic acid-like substances and humic acid-like substances. Proteobacteria, Firmucutes, Epsilonbacteria and Bacteroides were the major microbes attached to the ceramic membrane fouling layer which were effectively removed by NaOCl.

Sign in / Sign up

Export Citation Format

Share Document