Evaluation of pebble scanning strategies for fuel qualification by simple simulated radiography

2021 ◽  
Vol 383 ◽  
pp. 111418
Author(s):  
Grant W. Helmreich ◽  
Daniel R. Brown ◽  
Brandon Blamer
Keyword(s):  
Scanning Strategies

scholarly journals Microstructure and Crystallographic Texture of Laser Additive Manufactured Nickel-Based Superalloys with Different Scanning Strategies

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 591
Author(s):  
Xingbo Liu ◽  
Hui Xiao ◽  
Wenjia Xiao ◽  
Lijun Song
Keyword(s):  
Additive Manufacturing ◽  
Epitaxial Growth ◽  
Crystallographic Texture ◽  
Continuous Wave ◽  
Flow Direction ◽  
Fiber Texture ◽  
Laves Phase ◽  
Solidification Structure ◽  
Columnar Grains ◽  
Scanning Strategies

Control of solidification structure and crystallographic texture during metal additive manufacturing is a challenging work which attracts the increasing interest of researchers. In the present work, two kinds of scanning strategies (i.e., single-directional scanning (SDS) and cross-directional scanning (CDS) were used to control the solidification structure and crystallographic texture during quasi-continuous-wave laser additive manufacturing (QCW-LAM) of Inconel 718. The results show that the solidification structure and texture are strongly dependent on scanning strategies. The SDS develops a typical fiber texture with unidirectional columnar grains, whereas the CDS develops a more random texture with a mixture of unidirectional and multidirectional grains. In addition, the SDS promotes the continuously epitaxial growth of columnar dendrites and results in the linearly distributed Laves phase particles, while the CDS leads to the alternately distributed Laves phase particles with chain-like morphology and discrete morphology. The changed stacking features of molten-pool boundary and the switched heat flow direction caused by different scanning strategies plays a crucial role on the epitaxial growth of dendrites and the final solidification structure of the fabricated parts.

scholarly journals Study on laser powder bed fusion of nickel-base alloy of G-surface structure: scanning strategy, properties and compression properties

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Bo Qian ◽  
Hongri Fan ◽  
Jianrui Zhang ◽  
Tengfei Li ◽  
Jiangtao Xi ◽  
...  
Keyword(s):  
Surface Structure ◽  
Base Alloy ◽  
Nickel Base Alloy ◽  
Laser Powder Bed Fusion ◽  
Scanning Strategy ◽  
Powder Bed ◽  
Compression Performance ◽  
Solid Structure ◽  
Nickel Base ◽  
Scanning Strategies

AbstractAiming at laser powder bed fusion of GH3536 nickel base alloy, the effects of different scanning strategies on microstructure, porosity and mechanical properties were explored. In the aspect of microstructure and micro hardness of the sample, three scanning strategies had little difference; in the aspect of macro mechanical properties of the sample, the slope subarea scanning was better than the helix and island scanning. On this basis, the slope subarea scanning was selected as the optimal scanning strategy to form the G-surface structure, and the compression performance of G-surface was studied. The results showed that: (1) the compression performance of G-surface structure was smaller than that of solid structure, The compression strength of G-surface can only reach about 20% of solid structure: the average strength value of G-surface is 220 MPa, solid structure is 1.1 GMpa; while G-surface structure had a smooth compression curve, which indicated the good energy absorption characteristics; (2) with the increase of wall thickness, the mechanical performance of G-surface structure was also enhanced, while the energy absorption capacity was constantly reduced; (3) with the same wall thickness, the compression performance of sample in building direction (BD) is higher than that in horizontal direction (HD).

Simulation of Residual Stress in Lens Deposited H13 Tool Steel on Copper Substrate

2011 ◽  
Author(s):  
Tushar K. Talukdar ◽  
Liang Wang ◽  
Sergio D. Felicelli
Keyword(s):  
Residual Stress ◽  
Tool Steel ◽  
Laser Power ◽  
Copper Substrate ◽  
Scanning Speed ◽  
Temperature History ◽  
H13 Tool Steel ◽  
Scanning Strategies ◽  
Stress Accumulation ◽  
Free Edges

Solidification cracking represents a significant scientific and technical challenge in the rapid fabrication of bimetallic parts involving Cu and H13 tool steel. The main cause of the cracking formation is attributed to the residual stress accumulation, which depends on the thermal history and phase transformation during the deposition. In this research, a thermomechanical three-dimensional finite element model is developed to determine the temperature history and residual stress in Cu-H13 samples deposited by the Laser Engineered Net Shaping (LENS) process. The development of the model was carried out using the SYSWELD software package. The metallurgical transformations are taken into account using the temperature dependent material properties and the continuous cooling transformation diagram. Two different scanning strategies — alternative and unidirectional — are studied. The same model is also applied to a H13-H13 sample to compare the results. The input laser power is optimized for each layer and three different scanning speeds to maintain a steady molten pool size. It is observed that for a constant scanning speed the required laser power decreases with addition of more layers, and with the increase of scanning speed the laser power needs to be increased. The residual stress is found to be compressive near the center of the deposited wall and tensile at the free edges, which is consistent with the published experimental results in the literature. Similar stress distributions are obtained for both scanning strategies with higher stress concentration at the free edges of the interface between the substrate and the first layer. In these regions, the use of H13 substrate results in a higher stress accumulation than the Cu substrate.

scholarly journals Low-Level Wind Shear Identification along the Glide Path at BCIA by the Pulsed Coherent Doppler Lidar

Atmosphere ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 50
Author(s):  
Hongwei Zhang ◽  
Xiaoying Liu ◽  
Qichao Wang ◽  
Jianjun Zhang ◽  
Zhiqiang He ◽  
...  
Keyword(s):  
Wind Shear ◽  
Vertical Direction ◽  
Small Scale ◽  
Observation Data ◽  
Doppler Lidar ◽  
Low Level ◽  
Glide Path ◽  
Coherent Doppler Lidar ◽  
Scanning Strategies ◽  
Meteorological Phenomenon

Low-level wind shear is usually to be a rapidly changing meteorological phenomenon that cannot be ignored in aviation security service by affecting the air speed of landing and take-off aircrafts. The lidar team in Ocean University of China (OUC) carried out the long term particular researches on the low-level wind shear identification and regional wind shear inducement search at Beijing Capital International Airport (BCIA) from 2015 to 2020 by operating several pulsed coherent Doppler lidar (PCDL) systems. On account of the improved glide path scanning strategy and virtual multiple wind anemometers based on the rang height indicator (RHI) modes, the small-scale meteorological phenomenon along the glide path and/or runway center line direction can be captured. In this paper, the device configuration, scanning strategies, and results of the observation data are proposed. The algorithms to identify the low-level wind shear based on the reconstructed headwind profiles data have been tested and proved based on the lidar data obtained from December 2018 to January 2019. High spatial resolution observation data at vertical direction are utilized to study the regional wind shear inducement at the 36L end of BCIA under strong northwest wind conditions.

scholarly journals Turning of Additively Manufactured Ti6Al4V: Effect of the Highly Oriented Microstructure on the Surface Integrity

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2842
Author(s):  
Lucia Lizzul ◽  
Rachele Bertolini ◽  
Andrea Ghiotti ◽  
Stefania Bruschi
Keyword(s):  
Surface Integrity ◽  
Cryogenic Cooling ◽  
Powder Layer ◽  
Layer By Layer ◽  
Turning Operations ◽  
Powder Bed ◽  
Remarkable Effect ◽  
Scanning Strategies ◽  
Machining Operations ◽  
Microstructural Anisotropy

Additive manufacturing processes induce a high orientation in the microstructure of the printed part due to the strong thermal gradients developed during the process caused by the highly concentrated heat source that is used to melt the metal powder layer-by-layer. The resulting microstructural anisotropy may have an effect on the post-processing operations such as machining ones. This paper investigates the influence of the anisotropy in turning operations carried out on laser powder bed fused Ti6Al4V parts manufactured with different scanning strategies. The machinability under both transverse and cylindrical turning operations was assessed in terms of surface integrity, considering both surface and sub-surface aspects. The effect of the different cooling conditions, that is flood and cryogenic ones, was studied as well. The outcomes showed that the microstructural anisotropy had a remarkable effect on the machining operations and that the cryogenic cooling enhanced the effect of the anisotropy in determining the surface integrity.

The influence of WSR-88D intra-volume scanning strategies on thunderstorm observations and warnings in the dual-polarization radar era: 2011-2020

2021 ◽  
Author(s):  
Michael M. French
Keyword(s):  
Lead Time ◽  
Elevation Angle ◽  
Large Majority ◽  
Dual Polarization ◽  
Severe Thunderstorm ◽  
Low Level ◽  
Tornado Warnings ◽  
Scanning Strategies ◽  
The Cost ◽  
Organized Convection

Abstract The Weather Surveillance Radar - 1988 Doppler (WSR-88D) network has undergone several improvements in the last decade with the upgrade to dual-polarization capabilities and the ability for forecasters to re-scan the lowest levels of the atmosphere more frequently through the use of Supplemental Adaptive Intra-volume Scanning (SAILS). SAILS reduces the revisit period for scanning the lowest 1 km of the atmosphere but comes at the cost of a longer delay between scans at higher altitudes. This study quantifies how often radar Volume Coverage Patterns (VCPs) and all available SAILS options are used during the issuance of 148,882 severe thunderstorm and 18,263 tornado warnings, and near 10,474 tornado, 58,934 hail, and 127,575 wind reports in the dual-polarization radar era. A large majority of warnings and storm reports were measured with a VCP providing denser low-level sampling coverage. More frequent low-level updates were employed near tornado warnings and reports compared to severe thunderstorm warnings and hail or wind hazards. Warnings issued near a radar providing three extra low-level scans (SAILSx3) were more likely to be verified by a hazard with a positive lead time than warnings with fewer low-level scans. However, extra low-level scans were more frequently used in environments supporting organized convection as shown using watches issued by the Storm Prediction Center. Recently, the number of mid-level radar elevation scans is declining per hour, which can adversely affect the tracking of convective polarimetric signatures, like ZDR columns, which were found above the 0.5° elevation angle in over 99% of cases examined.

scholarly journals Virtual Development of Process Parameters for Bulk Metallic Glass Formation in Laser-Based Powder Bed Fusion

Materials ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 450
Author(s):  
Johan Lindwall ◽  
Andreas Lundbäck ◽  
Jithin James Marattukalam ◽  
Anders Ericsson
Keyword(s):  
Additive Manufacturing ◽  
Metallic Glass ◽  
Bulk Metallic Glass ◽  
Process Parameters ◽  
Glass Formation ◽  
Laser Power ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
Scanning Strategies ◽  
Hatch Spacing

The development of process parameters and scanning strategies for bulk metallic glass formation during additive manufacturing is time-consuming and costly. It typically involves trials with varying settings and destructive testing to evaluate the final phase structure of the experimental samples. In this study, we present an alternative method by modelling to predict the influence of the process parameters on the crystalline phase evolution during laser-based powder bed fusion (PBF-LB). The methodology is demonstrated by performing simulations, varying the following parameters: laser power, hatch spacing and hatch length. The results are compared in terms of crystalline volume fraction, crystal number density and mean crystal radius after scanning five consecutive layers. The result from the simulation shows an identical trend for the predicted crystalline phase fraction compared to the experimental estimates. It is shown that a low laser power, large hatch spacing and long hatch lengths are beneficial for glass formation during PBF-LB. The absolute values show an offset though, over-predicted by the numerical model. The method can indicate favourable parameter settings and be a complementary tool in the development of scanning strategies and processing parameters for additive manufacturing of bulk metallic glass.

scholarly journals PB-kPRED: knowledge-based prediction of protein backbone conformation using a structural alphabet

2017 ◽  
Author(s):  
Iyanar Vetrivel ◽  
Swapnil Mahajan ◽  
Manoj Tyagi ◽  
Lionel Hoffmann ◽  
Yves-Henri Sanejouand ◽  
...  
Keyword(s):  
Protein Structures ◽  
Scoring Function ◽  
Evolutionary Information ◽  
Structural Alphabet ◽  
Local Structures ◽  
Knowledge Based ◽  
Scanning Strategies ◽  
Accuracy Of Prediction ◽  
The Impact ◽  
Protein Blocks

AbstractLibraries of structural prototypes that abstract protein local structures are known as structural alphabets and have proven to be very useful in various aspects of protein structure analyses and predictions. One such library, Protein Blocks (PBs), is composed of 16 standard 5-residues long structural prototypes. This form of analyzing proteins involves drafting its structure as a string of PBs. Thus, predicting the local structure of a protein in terms of protein blocks is a step towards the objective of predicting its 3-D structure. Here a new approach, kPred, is proposed towards this aim that is independent of the evolutionary information available. It involves (i) organizing the structural knowledge in the form of a database of pentapeptide fragments extracted from all protein structures in the PDB and (ii) apply a purely knowledge-based algorithm, not relying on secondary structure predictions or sequence alignment profiles, to scan this database and predict most probable backbone conformations for the protein local structures.Based on the strategy used for scanning the database, the method was able to achieve efficient mean Q16 accuracies between 40.8% and 66.3% for a non-redundant subset of the PDB filtered at 30% sequence identity cut-off. The impact of these scanning strategies on the prediction was evaluated and is discussed. A scoring function that gives a good estimate of the accuracy of prediction was further developed. This score estimates very well the accuracy of the algorithm (R2 of 0.82). An online version of the tool is provided freely for non-commercial usage at http://www.bo-protscience.fr/kpred/.

Sign in / Sign up

Export Citation Format

Share Document