scholarly journals Speed humps and speed tables: Externalities on vehicle speed, pollutant emissions and fuel consumption

2020 ◽  
Vol 5 ◽  
pp. 100089 ◽  
Author(s):  
Saúl A. Obregón-Biosca
Keyword(s):  
Fuel Consumption ◽  
Pollutant Emissions ◽  
Vehicle Speed ◽  
Speed Humps

scholarly journals Modeling research of city bus fuel consumption for different driving cycles

2021 ◽  
Vol 2130 (1) ◽  
pp. 012001
Author(s):  
L Grabowski
Keyword(s):  
Carbon Dioxide ◽  
Fuel Consumption ◽  
Carbon Dioxide Emissions ◽  
Operating Conditions ◽  
Urban Traffic ◽  
Pollutant Emissions ◽  
Vehicle Speed ◽  
Traffic Conditions ◽  
Driving Cycles ◽  
Road Gradient

Abstract Simulation studies can be used to determine the fuel consumption and carbon dioxide emissions of city buses. The operating conditions of such vehicles are characterised by a very high variability of vehicle speed due to the large number of stops along the route of the bus. During vehicle testing, driving cycles are used to replicate the real-world conditions and to achieve repeatable test conditions. Such a driving cycle is a profile of speed represented as a function of time or as a function of distance. The speed profile over time can be an advantageous determinant, based on laboratory tests, for estimating fuel consumption and pollutant emissions of city buses. The research subject of this paper was the simulation of bus driving under simulated urban traffic conditions, carried out by means of the VECTO software. VECTO is a tool designed to perform the calculations of fuel consumption and carbon dioxide emissions of vehicles. It enables to model the powertrain of trucks and buses and to carry out simulations on various routes defined by driving cycles. The test object was a mega class bus, equipped with a 225 kW engine. The bus has three axles, including the rear drive axle. The scope of research included four cycles: urban, interurban, urbandelivery and interurban. Each of these was analysed in terms of speed and road gradient. The aim of this work was to perform a simulation study of the effect of the vehicle traffic conditions on the amount of CO2 emitted and fuel consumption. The obtained results were analysed.

scholarly journals Real driving emissions and fuel consumption characteristics of Istanbul public transportation

2017 ◽  
Vol 21 (1 Part B) ◽  
pp. 665-667 ◽  
Author(s):  
Orkun Ozener
Keyword(s):  
Fuel Consumption ◽  
Public Transportation ◽  
Primary Source ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Emission Measurement ◽  
Vehicle Speed ◽  
Linear Effect ◽  
Operating Modes ◽  
Portable Emission Measurement System

Public transportation, which uses intra city lines frequently, has vital importance on the cities air pollution. The fossil fuel based drive units, which emits pollutants, are the primary source of this interest. Also, the fuel consumption is another major concern because of economic aspects. For an efficient and clear transportation, the pollutants and fuel consumption has to be analyzed, considering the operating conditions. In this context, the Metrobus line of Istanbul city which crosses from European side to Asian side of the city was analyzed with portable emission measurement system and portable fuel consumption meter devices. The relevant bus operating data were also collected during the operation. The data were analyzed while considering the operating modes like acceleration, deceleration, and constant speed cruises. The emission factors were developed. The pollutant emissions generally decreased as the vehicle speed increased while the fuel consumption increased for the same acceleration level. These results show the importance of operating conditions and their non-linear effect on emissions and fuel consumption Istanbul public transportation.

scholarly journals Factors Affecting the Rate of Fuel Consumption in Aircrafts

2021 ◽  
Vol 13 (14) ◽  
pp. 8066
Author(s):  
Thowayeb H. Hassan ◽  
Abu Elnasr E. Sobaih ◽  
Amany E. Salem
Keyword(s):  
Fuel Consumption ◽  
Positive Association ◽  
Pollutant Emissions ◽  
Aviation Industry ◽  
Factors Affecting ◽  
Fuel Flow ◽  
Homogeneity Of Variance ◽  
Strong Positive Association ◽  
Ground Distance ◽  
The Cost

The cost of fuel and its availability are among the most major concerns for aircrafts and the aviation industry overall. Environmental difficulties with chemical pollutant emissions emitted by aviation machines are also connected to fuel consumption. As a result, it is crucial to examine factors that affect the overall fuel usage and consumption in the airport-based aviation industry. Several variables were investigated related to the total fuel consumed, such as dry operating weight (DOW) (KG), zero-fuel weight (ZFW), take-off weight (TOW), air distance (AIR DIST) (KM), and ground distance (GDN DIST). Analysis of the correlation between total fuel consumed as well as the extra fuel and selected variables was conducted. The results showed that the most positively associated factors with the total used fuel were the air distance (r2 = 0.86, p < 0.01), ground distance (r2 = 0.78, p < 0.01), TOW (r2 = 0.68, p < 0.01), and flight time (r2 = 0.68, p < 0.01). There was also a strong positive association between the average fuel flow (FF) and actual TOW (r2 = 0.74, p < 0.01) as well as ZFW (r2 = 0.61, p < 0.01). The generalized linear model (GLM) was utilized to assess the predictions of total energy usage after evaluating important outliers, stability of the homogeneity of variance, and the normalization of the parameter estimation. The results of multiple linear regression revealed that the most significant predictors of the total consumed fuel were the actual ZFW (p < 0.01), actual TOW (p < 0.01), and actual average FF (p < 0.05). The results interestingly confirmed that wind speed has some consequences and effects on arrival fuel usage. The result reflects that thermal and hydrodynamic economies impact on the flying fuel economy. The research has various implications for both scholars and practitioners of aviation industry.

A Multidisciplinary Approach for the Comprehensive Assessment of Integrated Rotorcraft–Powerplant Systems at Mission Level

2014 ◽  
Vol 137 (1) ◽  
Author(s):  
Ioannis Goulos ◽  
Fakhre Ali ◽  
Konstantinos Tzanidakis ◽  
Vassilios Pachidis ◽  
Roberto d'Ippolito
Keyword(s):  
Environmental Impact ◽  
Fuel Consumption ◽  
Comprehensive Assessment ◽  
Pollutant Emissions ◽  
Operational Performance ◽  
Civil Aviation ◽  
Accurate Estimation ◽  
Nox Emissions ◽  
Reactor Model ◽  
Stirred Reactor

This paper presents an integrated methodology for the comprehensive assessment of combined rotorcraft–powerplant systems at mission level. Analytical evaluation of existing and conceptual designs is carried out in terms of operational performance and environmental impact. The proposed approach comprises a wide-range of individual modeling theories applicable to rotorcraft flight dynamics and gas turbine engine performance. A novel, physics-based, stirred reactor model is employed for the rapid estimation of nitrogen oxides (NOx) emissions. The individual mathematical models are implemented within an elaborate numerical procedure, solving for total mission fuel consumption and associated pollutant emissions. The combined approach is applied to the comprehensive analysis of a reference twin-engine light (TEL) aircraft modeled after the Eurocopter Bo 105 helicopter, operating on representative mission scenarios. Extensive comparisons with flight test data are carried out and presented in terms of main rotor trim control angles and power requirements, along with general flight performance charts including payload-range diagrams. Predictions of total mission fuel consumption and NOx emissions are compared with estimated values provided by the Swiss Federal Office of Civil Aviation (FOCA). Good agreement is exhibited between predictions made with the physics-based stirred reactor model and experimentally measured values of NOx emission indices. The obtained results suggest that the production rates of NOx pollutant emissions are predominantly influenced by the behavior of total air inlet pressure upstream of the combustion chamber, which is affected by the employed operational procedures and the time-dependent all-up mass (AUM) of the aircraft. It is demonstrated that accurate estimation of on-board fuel supplies ahead of flight is key to improving fuel economy as well as reducing environmental impact. The proposed methodology essentially constitutes an enabling technology for the comprehensive assessment of existing and conceptual rotorcraft–powerplant systems, in terms of operational performance and environmental impact.

Numerical and Experimental Study on the Impact of Mild Cold EGR on Exhaust Emissions in a Biodiesel Fueled Diesel Engine

2021 ◽  
Author(s):  
Alex Oliveira ◽  
Junfeng Yang ◽  
Jose Sodre
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Exhaust Emissions ◽  
Pollutant Emissions ◽  
Cylinder Pressure ◽  
Nox Formation ◽  
Ratio Distribution ◽  
Engine Model ◽  
Gas Recirculation ◽  
The Impact

Abstract This work evaluated the effect of cooled exhaust gas recirculation (EGR) on fuel consumption and pollutant emissions from a diesel engine fueled with B8 (a blend of biodiesel and Diesel 8:92%% by volume), experimentally and numerically. Experiments were carried out on a Diesel power generator with varying loads from 5 kW to 35 kW and 10% of cold EGR ratio. Exhaust emissions (e.g. THC, NOX, CO etc.) were measured and evaluated. The results showed mild EGR and low biodiesel content have minor impact of engine specific fuel consumption, fuel conversion efficiency and in-cylinder pressure. Meanwhile, the combination of EGR and biodiesel reduced THC and NOX up to 52% and 59%, which shows promising effect on overcoming the PM-NOX trade-off from diesel engine. A 3D CFD engine model incorporated with detailed biodiesel combustion kinetics and NOx formation kinetics was validated against measured in-cylinder pressure, temperature and engine-out NO emission from diesel engine. This valid model was then employed to investigate the in-cylinder temperature and equivalence ratio distribution that predominate NOx formation. The results showed that the reduction of NOx emission by EGR and biodiesel is obtained by a little reduction of the local in-cylinder temperature and, mainly, by creating comparatively rich combusting mixture.

Adaptive calibration of Diesel engine injection for minimising fuel consumption with constrained NOx emissions in actual driving missions

2020 ◽  
pp. 146808742091880
Author(s):  
José Manuel Luján ◽  
Benjamín Pla ◽  
Pau Bares ◽  
Varun Pandey
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Time Window ◽  
Transition Probability ◽  
Estimation Method ◽  
Engine Performance ◽  
Driving Cycle ◽  
Vehicle Speed ◽  
Adaptive Calibration ◽  
Emission Limits

This article proposes a method for fuel minimisation of a Diesel engine with constrained [Formula: see text] emission in actual driving mission. Specifically, the methodology involves three developments: The first is a driving cycle prediction tool which is based on the space-variant transition probability matrix obtained from an actual vehicle speed dataset. Then, a vehicle and an engine model is developed to predict the engine performance depending on the calibration for the estimated driving cycle. Finally, a controller is proposed which adapts the start-of-injection calibration map to fulfil the [Formula: see text] emission constraint while minimising the fuel consumption. The calibration is adapted during a predefined time window based on the predicted engine performance on the estimated cycle and the difference between the actual and the constraint on engine [Formula: see text] emissions. The method assessment was done experimentally in the engine test set-up. The engine performace using the method is compared with the state-of-the-art static calibration method for different [Formula: see text] emission limits on real driving cycles. The online implementation of the method shows that the fuel consumption can be reduced by 3%–4% while staying within the emission limits, indicating that the estimation method is able to capture the main driving cycle characterstics.

scholarly journals Real-World Measurement of Hybrid Buses’ Fuel Consumption and Pollutant Emissions in a Metropolitan Urban Road Network

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2569 ◽  
Author(s):  
Christos Keramydas ◽  
Georgios Papadopoulos ◽  
Leonidas Ntziachristos ◽  
Ting-Shek Lo ◽  
Kwok-Lam Ng ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Road Network ◽  
Pollutant Emissions ◽  
Emission Measurement ◽  
Body Type ◽  
Urban Road Network ◽  
Urban Road ◽  
Wide Range ◽  
The Mean ◽  
Consumption Benefits

This study investigates pollutant emissions and fuel consumption of six Euro VI hybrid-diesel public transport buses operating on different scheduled routes in a metropolitan urban road network. Portable emission measurement systems (PEMS) are used in measurements and results are compared to those obtained from a paired number of Euro V conventional buses of the same body type used as control over the same routes. The selected routes vary from urban to highway driving and the experimentation was conducted over the first half of 2015. The available emissions data correspond to a wide range of driving, operating, and ambient conditions. Fuel consumption, distance- and energy-based emission levels are derived and presented in a comparative manner. The effect of different factors, including speed, ambient temperature, and road grade on fuel consumption and emissions performance is investigated. Mean fuel consumption of hybrid buses was found 6.1% lower than conventional ones, from 20% lower up to 16% higher, over six routes tested in total. The mean route difference between the two technologies was not statistically significant. Air conditioning decreased consumption benefits of the hybrid buses. Decrease of the mean route speed from 15 km h−1 tο 8 km h−1 increased the hybrid buses consumption by 63%. Nitrogen oxides (NOx) emissions of the Euro VI hybrid buses were 93 ± 5% lower than conventional Euro V ones. Nitrous oxide (N2O) emissions from hybrid Euro VI buses made up 5.9% of total greenhouse gas emissions and largely offset carbon dioxide (CO2) benefits. The results suggest that hybrid urban buses need to be assessed under realistic operation and environmental conditions to assess their true environmental and fuel consumption benefits.

scholarly journals 170 Social and Environmental Benefits of Virtual Fracture Clinics in Trauma and Orthopaedic Surgery: Reduced Patient Travel Time, Patient Cost and Air Pollutant Emissions

2021 ◽  
Vol 108 (Supplement_6) ◽  
Author(s):  
J Fort ◽  
H Hughes ◽  
U Khan ◽  
A Glynn
Keyword(s):  
Travel Time ◽  
Fuel Consumption ◽  
Travel Distance ◽  
Air Pollutant ◽  
Environmental Benefits ◽  
Pollutant Emissions ◽  
Patient Cost ◽  
Travel Costs ◽  
Patient Travel ◽  
Travel Burden

Abstract Aim Several papers have analysed the clinical benefits and safety of Virtual Fracture Clinics (VFCs). A significant increase in the use of Trauma and Orthopaedic (T&O) VFCs was seen during the COVID-19 pandemic. This study aims to investigate the social impact of VFCs on the travel burden and travel costs of T&O patients, as well as the potential environmental benefits in relation to fuel consumption and travel-related pollutant emissions. Method All patients referred for T&O VFC review from March 2020 to June 2020 were retrospectively analysed. The travel burden and environmental impacts of hypothetical face-to-face consultations were compared with these VFC reviews. The primary outcomes measured were patient travel time saved, patient travel distance saved, patient cost savings and reduction in air-pollutant emissions. Results Over a four-month period, 1359 VFC consultations were conducted. The average travel distance saved by VFC review was 88.6 kilometres (range 3.3-615), with an average of 73 minutes (range 9-390) of travel-time saved. Patients consumed, on average, 8.2 litres (range 0.3-57.8) less fuel and saved an average of €11.02 (range 0.41-76.59). The average reduction in air-pollutant vehicle emissions, including carbon dioxide, carbon monoxide, nitric oxides and volatile organic compounds was 20.3 kilograms (range 0.8-140.8), 517.3 grams (g) (range 19.3-3592.3), 38.1g (range 1.4-264.8) and 56.9g (range 2.1-395.2), respectively. Conclusions VFCs reduce patient travel distance, travel time and travel costs. In addition, VFCs confer significant environmental benefits through reduced fuel consumption and reduction of harmful environmental emissions.

An Energy Efficient Power-Split Hybrid Transmission System to Drive Hydraulic Implements in Construction Machines

2021 ◽  
Author(s):  
Mateus Bertolin ◽  
Andrea Vacca
Keyword(s):  
Fuel Consumption ◽  
Pollutant Emissions ◽  
Engine Operation ◽  
Construction Machinery ◽  
Load Sensing ◽  
Parallel Hybrid ◽  
Power Split ◽  
Truck Loading ◽  
Hybrid Transmission ◽  
Efficient Power

Abstract This paper proposes a novel hybrid power-split transmission to drive hydraulic implements in construction machinery. The highly efficient power-split hybrid transmission is combined with displacement controlled (DC) actuators to eliminate throttling losses within the hydraulic system and achieve higher fuel savings. The architecture design, sizing and power management are addressed. Simulation results considering a realistic truck-loading cycle on a mini excavator demonstrate the feasibility of the idea. A systematic comparison between the proposed system and the previously developed series-parallel hybrid is also carried out. The paper compares engine operation and fuel consumption of the previously mentioned hybrid system with the original non-hybrid load-sensing machine. It is shown that by implementing an efficient engine operation control, the proposed system can achieve up to 60.2% improvement in fuel consumption when compared to the original machine and consume 11.8% less than the previously developed series-parallel hybrid with DC actuation. Other advantages of the proposed solution include a much steadier engine operation, which opens to the possibility of designing an engine for optimal consumption and emissions at a single operating point as well as greatly reduce pollutant emissions. A steadier prime mover operation should also benefit fully electric machines, as the battery would not be stressed with heavy transients.

Sign in / Sign up

Export Citation Format

Share Document