Novel applications of organic based thin film transistors

2000 ◽  
Vol 40 (4-5) ◽  
pp. 779-782 ◽  
Author(s):  
Luisa Torsi
Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2299
Author(s):  
Hyeon-Jun Lee ◽  
Katsumi Abe ◽  
June-Seo Kim ◽  
Won-Seok Yun ◽  
Myoung-Jae Lee

As novel applications of oxide semiconductors are realized, various structural devices and integrated circuits are being proposed, and the gate-overlay defect phenomenon is becoming more diverse in its effects. Herein, the electrical properties of the transistor that depend on the geometry between the gate and the semiconductor layer are analyzed, and the specific phenomena associated with the degree of overlap are reproduced. In the semiconductor layer, where the gate electrode is not overlapped, it is experimentally shown that a dual current is generated, and the results of 3D simulations confirm that the magnitude of the current increases as the parasitic current moves away from the gate electrode. The generation and path of the parasitic current are then represented visually through laser-enhanced 2D transport measurements; consequently, the flow of the dual current in the transistor is verified to be induced by the electrical potential imbalance in the semiconductor active layer, where the gate electrodes do not overlap.


2001 ◽  
Vol 45 (8) ◽  
pp. 1479-1485 ◽  
Author(s):  
L. Torsi ◽  
N. Cioffi ◽  
C. Di Franco ◽  
L. Sabbatini ◽  
P.G. Zambonin ◽  
...  

2020 ◽  
Vol 91 (3) ◽  
pp. 30201
Author(s):  
Hang Yu ◽  
Jianlin Zhou ◽  
Yuanyuan Hao ◽  
Yao Ni

Organic thin film transistors (OTFTs) based on dioctylbenzothienobenzothiophene (C8BTBT) and copper (Cu) electrodes were fabricated. For improving the electrical performance of the original devices, the different modifications were attempted to insert in three different positions including semiconductor/electrode interface, semiconductor bulk inside and semiconductor/insulator interface. In detail, 4,4′,4′′-tris[3-methylpheny(phenyl)amino] triphenylamine (m-MTDATA) was applied between C8BTBTand Cu electrodes as hole injection layer (HIL). Moreover, the fluorinated copper phthalo-cyanine (F16CuPc) was inserted in C8BTBT/SiO2 interface to form F16CuPc/C8BTBT heterojunction or C8BTBT bulk to form C8BTBT/F16CuPc/C8BTBT sandwich configuration. Our experiment shows that, the sandwich structured OTFTs have a significant performance enhancement when appropriate thickness modification is chosen, comparing with original C8BTBT devices. Then, even the low work function metal Cu was applied, a normal p-type operate-mode C8BTBT-OTFT with mobility as high as 2.56 cm2/Vs has been fabricated.


2010 ◽  
Vol 130 (2) ◽  
pp. 161-166
Author(s):  
Yoshinori Ishikawa ◽  
Yasuo Wada ◽  
Toru Toyabe ◽  
Ken Tsutsui

2015 ◽  
Vol 135 (6) ◽  
pp. 192-198 ◽  
Author(s):  
Shinnosuke Iwamatsu ◽  
Yutaka Abe ◽  
Toru Yahagi ◽  
Seiya Kobayashi ◽  
Kazushige Takechi ◽  
...  

2003 ◽  
Vol 771 ◽  
Author(s):  
Michael C. Hamilton ◽  
Sandrine Martin ◽  
Jerzy Kanicki

AbstractWe have investigated the effects of white-light illumination on the electrical performance of organic polymer thin-film transistors (OP-TFTs). The OFF-state drain current is significantly increased, while the drain current in the strong accumulation regime is relatively unaffected. At the same time, the threshold voltage is decreased and the subthreshold slope is increased, while the field-effect mobility of the charge carriers is not affected. The observed effects are explained in terms of the photogeneration of free charge carriers in the channel region due to the absorbed photons.


2013 ◽  
Vol E96.C (11) ◽  
pp. 1360-1366 ◽  
Author(s):  
Ichiro FUJIEDA ◽  
Tse Nga NG ◽  
Tomoya HOSHINO ◽  
Tomonori HANASAKI

Author(s):  
Byung-Jae Kim ◽  
Hyeon-Seok Seo ◽  
Won-Ho Lee ◽  
Jong-Hyun Ahn ◽  
Youn-Jea Kim

2018 ◽  
Vol 5 (2) ◽  
pp. 16-18
Author(s):  
Chandar Shekar B ◽  
Ranjit Kumar R ◽  
Dinesh K.P.B ◽  
Sulana Sundar C ◽  
Sunnitha S ◽  
...  

Thin films of poly vinyl alcohol (PVA) were prepared on pre-cleaned glass substrates by Dip Coating Method. FTIR spectrum was used to identify the functional groups present in the prepared films. The vibrational peaks observed at 1260 cm-1 and 851 cm-1 are assigned to C–C stretching and CH rocking of PVA.The characteristic band appearing at 1432 cm-1 is assigned to C–H bend of CH2 of PVA. The thickness of the prepared thin films were measured by using an electronic thickness measuring instrument (Tesatronic-TTD20) and cross checked by gravimetric method. XRD spectra indicated the amorphous nature of the films.Surface morphology of the coated films was studied by scanning electron microscope (SEM). The surface revealed no pits and pin holes on the surface. The observed surface morphology indicated that these films could be used as dielectric layer in organic thin film transistors and as drug delivery system for wound healing.


Sign in / Sign up

Export Citation Format

Share Document