A generalized Reynolds analogy for compressible wall-bounded turbulent flows

2013 ◽  
Vol 739 ◽  
pp. 392-420 ◽  
Author(s):  
You-Sheng Zhang ◽  
Wei-Tao Bi ◽  
Fazle Hussain ◽  
Zhen-Su She
Keyword(s):  
Mach Number ◽  
Prandtl Number ◽  
Boundary Layers ◽  
Turbulent Flows ◽  
Wall Temperature ◽  
Velocity Fields ◽  
Recovery Factor ◽  
Mean Velocity ◽  
Reynolds Analogy ◽  
The Mean

AbstractA generalized Reynolds analogy (GRA) is proposed for compressible wall-bounded turbulent flows (CWTFs) and validated by direct numerical simulations. By introducing a general recovery factor, a similarity between the Reynolds-averaged momentum and energy equations is established for the canonical CWTFs (i.e. pipes, channels, and flat-plate boundary layers that meet the quasi-one-dimensional flow approximation), independent of Prandtl number, wall temperature, Mach number, Reynolds number, and pressure gradient. This similarity and the relationships between temperature and velocity fields constitute the GRA. The GRA relationship between the mean temperature and the mean velocity takes the same quadratic form as Walz’s equation, with the adiabatic recovery factor replaced by the general recovery factor, and extends the validity of the latter to diabatic compressible turbulent boundary layers and channel/pipe flows. It also derives Duan & Martín’s (J. Fluid Mech., vol. 684, 2011, pp. 25–59) empirical relation for flows at different physical conditions (wall temperature, Mach number, enthalpy condition, surface catalysis, etc.). Several key parameters besides the general recovery factor emerge in the GRA. An effective turbulent Prandtl number is shown to be the reason for the parabolic profile of mean temperature versus mean velocity, and it approximates unity in the fully turbulent region. A dimensionless wall temperature, that we call the diabatic parameter, characterizes the wall-temperature effects in diabatic flows. The GRA also extends the analysis to the fluctuation fields. It recovers the modified strong Reynolds analogy proposed by Huang, Coleman & Bradshaw (J. Fluid Mech., vol. 305, 1995, pp. 185–218) and explains the variation of the temperature–velocity correlation coefficient with wall temperature. Thus, the GRA unveils a generalized similarity principle behind the complex nonlinear coupling between the thermal and velocity fields of CWTFs.

Compressibility and Variable Density Effects in Turbulent Boundary layers

2006 ◽  
Vol 129 (4) ◽  
pp. 441-448 ◽  
Author(s):  
Kunlun Liu ◽  
Richard H. Pletcher
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Turbulent Boundary Layer ◽  
Boundary Layers ◽  
Wall Temperature ◽  
Stokes Equations ◽  
Variable Density ◽  
Turbulent Boundary Layers ◽  
Reynolds Analogy ◽  
Density Effects

Two compressible turbulent boundary layers have been calculated by using direct numerical simulation. One case is a subsonic turbulent boundary layer with constant wall temperature for which the wall temperature is 1.58 times the freestream temperature and the other is a supersonic adiabatic turbulent boundary layer subjected to a supersonic freestream with a Mach number 1.8. The purpose of this study is to test the strong Reynolds analogy (SRA), the Van Driest transformation, and the applicability of Morkovin’s hypothesis. For the first case, the influence of the variable density effects will be addressed. For the second case, the role of the density fluctuations, the turbulent Mach number, and dilatation on the compressibility will be investigated. The results show that the Van Driest transformation and the SRA are satisfied for both of the flows. Use of local properties enable the statistical curves to collapse toward the corresponding incompressible curves. These facts reveal that both the compressibility and variable density effects satisfy the similarity laws. A study about the differences between the compressibility effects and the variable density effects associated with heat transfer is performed. In addition, the difference between the Favre average and Reynolds average is measured, and the SGS terms of the Favre-filtered Navier-Stokes equations are calculated and analyzed.

scholarly journals Turbulent boundary layers and channels at moderate Reynolds numbers

2010 ◽  
Vol 657 ◽  
pp. 335-360 ◽  
Author(s):  
JAVIER JIMÉNEZ ◽  
SERGIO HOYAS ◽  
MARK P. SIMENS ◽  
YOSHINORI MIZUNO
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Turbulent Flows ◽  
Pressure Fluctuations ◽  
Reynolds Numbers ◽  
Streamwise Velocity ◽  
Rotational Flow ◽  
Mean Velocity ◽  
The Mean ◽  
External Flows

The behaviour of the velocity and pressure fluctuations in the outer layers of wall-bounded turbulent flows is analysed by comparing a new simulation of the zero-pressure-gradient boundary layer with older simulations of channels. The 99 % boundary-layer thickness is used as a reasonable analogue of the channel half-width, but the two flows are found to be too different for the analogy to be complete. In agreement with previous results, it is found that the fluctuations of the transverse velocities and of the pressure are stronger in the boundary layer, and this is traced to the pressure fluctuations induced in the outer intermittent layer by the differences between the potential and rotational flow regions. The same effect is also shown to be responsible for the stronger wake component of the mean velocity profile in external flows, whose increased energy production is the ultimate reason for the stronger fluctuations. Contrary to some previous results by our group, and by others, the streamwise velocity fluctuations are also found to be higher in boundary layers, although the effect is weaker. Within the limitations of the non-parallel nature of the boundary layer, the wall-parallel scales of all the fluctuations are similar in both the flows, suggesting that the scale-selection mechanism resides just below the intermittent region, y/δ = 0.3–0.5. This is also the location of the largest differences in the intensities, although the limited Reynolds number of the boundary-layer simulation (Reθ ≈ 2000) prevents firm conclusions on the scaling of this location. The statistics of the new boundary layer are available from http://torroja.dmt.upm.es/ftp/blayers/.

Direct numerical simulation of hypersonic turbulent boundary layers. Part 4. Effect of high enthalpy

2011 ◽  
Vol 684 ◽  
pp. 25-59 ◽  
Author(s):  
L. Duan ◽  
M. P. Martín
Keyword(s):  
Boundary Layers ◽  
Transport Model ◽  
Turbulent Boundary Layers ◽  
Turbulence Structure ◽  
Mean Velocity ◽  
Reynolds Analogy ◽  
High Enthalpy ◽  
Turbulent Schmidt Number ◽  
Wide Range ◽  
The Mean

AbstractIn this paper we present direct numerical simulations (DNS) of hypersonic turbulent boundary layers to study high-enthalpy effects. We study high- and low-enthalpy conditions, which are representative of those in hypersonic flight and ground-based facilities, respectively. We find that high-enthalpy boundary layers closely resemble those at low enthalpy. Many of the scaling relations for low-enthalpy flows, such as van-Driest transformation for the mean velocity, Morkovin’s scaling and the modified strong Reynolds analogy hold or can be generalized for high-enthalpy flows by removing the calorically perfect-gas assumption. We propose a generalized form of the modified Crocco relation, which relates the mean temperature and mean velocity across a wide range of conditions, including non-adiabatic cold walls and real gas effects. The DNS data predict Reynolds analogy factors in the range of those found in experimental data at low-enthalpy conditions. The gradient transport model approximately holds with turbulent Prandtl number and turbulent Schmidt number of order unity. Direct compressibility effects remain small and insignificant for all enthalpy cases. High-enthalpy effects have no sizable influence on turbulent kinetic energy (TKE) budgets or on the turbulence structure.

Large-scale features in turbulent pipe and channel flows

2007 ◽  
Vol 589 ◽  
pp. 147-156 ◽  
Author(s):  
J. P. MONTY ◽  
J. A. STEWART ◽  
R. C. WILLIAMS ◽  
M. S. CHONG
Keyword(s):  
Boundary Layer ◽  
Boundary Layers ◽  
Turbulent Flows ◽  
Large Scale ◽  
Significant Progress ◽  
Mean Velocity ◽  
Characteristic Structure ◽  
Custom Made ◽  
Logarithmic Region ◽  
The Mean

In recent years there has been significant progress made towards understanding the large-scale structure of wall-bounded shear flows. Most of this work has been conducted with turbulent boundary layers, leaving scope for further work in pipes and channels. In this article the structure of fully developed turbulent pipe and channel flow has been studied using custom-made arrays of hot-wire probes. Results reveal long meandering structures of length up to 25 pipe radii or channel half-heights. These appear to be qualitatively similar to those reported in the log region of a turbulent boundary layer. However, for the channel case, large-scale coherence persists further from the wall than in boundary layers. This is expected since these large-scale features are a property of the logarithmic region of the mean velocity profile in boundary layers and it is well-known that the mean velocity in a channel remains very close to the log law much further from the wall. Further comparison of the three turbulent flows shows that the characteristic structure width in the logarithmic region of a boundary layer is at least 1.6 times smaller than that in a pipe or channel.

scholarly journals Direct Numerical Simulation on Mach Number and Wall Temperature Effects in the Turbulent Flows of Flat-Plate Boundary Layer

2014 ◽  
Vol 17 (1) ◽  
pp. 189-212 ◽  
Author(s):  
Xian Liang ◽  
Xinliang Li
Keyword(s):  
Numerical Simulation ◽  
Boundary Layer ◽  
Mach Number ◽  
Turbulent Boundary Layer ◽  
Direct Numerical Simulation ◽  
Flat Plate ◽  
Wall Temperature ◽  
Wall Region ◽  
Mean Velocity ◽  
Reynolds Analogy

AbstractIn this paper, direct numerical simulation (DNS) is presented for spatially evolving turbulent boundary layer over an isothermal flat-plate atMa∞= 2.25,5,6,8. WhenMa∞= 8, two cases with the ratio of wall-to-reference temperatureTω/T∞= 1.9 and 10.03 are considered respectively. The wall temperature approaches recovery temperatures for other cases. The characteristics of compressible turbulent boundary layer (CTBL) affected by freestream Mach number and wall temperature are investigated. It focuses on assessing compressibility effects and the validity of Morkovin's hypothesis through computing and analyzing the mean velocity profile, turbulent intensity, the strong Reynolds analogy (SRA) and possibility density function of dilatation term. The results show that, when the wall temperature approaches recovery temperature, the effects of Mach number on compressibility is insignificant. As a result, the compressibility effect is very weak and the Morkovin's hypothesis is still valid for Mach number even up to 8. However, when Mach number equal to 8, the wall temperature effect on the compressibility is sensitive. In this case, whenTω/T∞= 1.9, the Morkovin's hypothesis is not fully valid. The validity of classical SRA depends on wall temperature directly. A new modified SRA is proposed to eliminate such negative factor in near wall region. Finally the effects of Mach number and wall temperature on streaks are also studied.

scholarly journals Stochastic Analysis of Natural Convection in Vertical Channels with Random Wall Temperature

2017 ◽  
Vol 2017 ◽  
pp. 1-7
Author(s):  
Ryoichi Chiba
Keyword(s):  
Natural Convection ◽  
Prandtl Number ◽  
Random Process ◽  
Wall Temperature ◽  
Correlation Time ◽  
Channel Wall ◽  
Velocity Fields ◽  
Transient Temperature ◽  
Horizontal Distance ◽  
Mean Square

This study attempts to derive the statistics of temperature and velocity fields of laminar natural convection in a heated vertical channel with random wall temperature. The wall temperature is expressed as a random function with respect to time, or a random process. First, analytical solutions of the transient temperature and flow velocity fields for an arbitrary temporal variation in the channel wall temperature are obtained by the integral transform and convolution theorem. Second, the autocorrelations of the temperature and velocity are formed from the solutions, assuming a stationarity in time. The mean square values of temperature and velocity are computed under the condition that the fluctuation in the channel wall temperature can be considered as white noise or a stationary Markov process. Numerical results demonstrate that a decrease in the Prandtl number or an increase in the correlation time of the random process increases the level of mean square velocity but does not change its spatial distribution tendency, which is a bell-shaped profile with a peak at a certain horizontal distance from the channel wall. The peak position is not substantially affected by the Prandtl number or the correlation time.

A wind tunnel simulation of the mean velocity fields behind upright porous fences

2007 ◽  
Vol 146 (1-2) ◽  
pp. 82-93 ◽  
Author(s):  
Zhibao Dong ◽  
Wanyin Luo ◽  
Guangqiang Qian ◽  
Hongtao Wang
Keyword(s):  
Wind Tunnel ◽  
Velocity Fields ◽  
Mean Velocity ◽  
Wind Tunnel Simulation ◽  
The Mean

scholarly journals On the streamwise evolution of turbulent boundary layers in arbitrary pressure gradients

2002 ◽  
Vol 461 ◽  
pp. 61-91 ◽  
Author(s):  
A. E. PERRY ◽  
IVAN MARUSIC ◽  
M. B. JONES
Keyword(s):  
Boundary Layers ◽  
Scaling Laws ◽  
Power Spectra ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Stream Velocity ◽  
Mean Flow ◽  
Mean Velocity ◽  
Law Of The Wall ◽  
The Mean

A new approach to the classic closure problem for turbulent boundary layers is presented. This involves, first, using the well-known mean-flow scaling laws such as the log law of the wall and the law of the wake of Coles (1956) together with the mean continuity and the mean momentum differential and integral equations. The important parameters governing the flow in the general non-equilibrium case are identified and are used for establishing a framework for closure. Initially closure is achieved here empirically and the potential for achieving closure in the future using the wall-wake attached eddy model of Perry & Marusic (1995) is outlined. Comparisons are made with experiments covering adverse-pressure-gradient flows in relaxing and developing states and flows approaching equilibrium sink flow. Mean velocity profiles, total shear stress and Reynolds stress profiles can be computed for different streamwise stations, given an initial upstream mean velocity profile and the streamwise variation of free-stream velocity. The attached eddy model of Perry & Marusic (1995) can then be utilized, with some refinement, to compute the remaining unknown quantities such as Reynolds normal stresses and associated spectra and cross-power spectra in the fully turbulent part of the flow.

Compressibility effects in a turbulent annular mixing layer. Part 1. Turbulence and growth rate

2000 ◽  
Vol 421 ◽  
pp. 229-267 ◽  
Author(s):  
JONATHAN B. FREUND ◽  
SANJIVA K. LELE ◽  
PARVIZ MOIN
Keyword(s):  
Growth Rate ◽  
Mach Number ◽  
Mixing Layer ◽  
Mixing Layers ◽  
Velocity Difference ◽  
Mean Velocity ◽  
The Mean ◽  
Mach Numbers ◽  
High Mach ◽  
Compressibility Effects

This work uses direct numerical simulations of time evolving annular mixing layers, which correspond to the early development of round jets, to study compressibility effects on turbulence in free shear flows. Nine cases were considered with convective Mach numbers ranging from Mc = 0.1 to 1.8 and turbulence Mach numbers reaching as high as Mt = 0.8.Growth rates of the simulated mixing layers are suppressed with increasing Mach number as observed experimentally. Also in accord with experiments, the mean velocity difference across the layer is found to be inadequate for scaling most turbulence statistics. An alternative scaling based on the mean velocity difference across a typical large eddy, whose dimension is determined by two-point spatial correlations, is proposed and validated. Analysis of the budget of the streamwise component of Reynolds stress shows how the new scaling is linked to the observed growth rate suppression. Dilatational contributions to the budget of turbulent kinetic energy are found to increase rapidly with Mach number, but remain small even at Mc = 1.8 despite the fact that shocklets are found at high Mach numbers. Flow visualizations show that at low Mach numbers the mixing region is dominated by large azimuthally correlated rollers whereas at high Mach numbers the flow is dominated by small streamwise oriented structures. An acoustic timescale limitation for supersonically deforming eddies is found to be consistent with the observations and scalings and is offered as a possible explanation for the decrease in transverse lengthscale.

scholarly journals Natural logarithms

2013 ◽  
Vol 718 ◽  
pp. 1-4 ◽  
Author(s):  
B. J. McKeon
Keyword(s):  
Turbulent Flows ◽  
Reynolds Numbers ◽  
Streamwise Velocity ◽  
Wall Turbulence ◽  
Significant Advance ◽  
Mean Velocity ◽  
Velocity Fluctuations ◽  
Logarithmic Scaling ◽  
The Mean ◽  
High Reynolds

AbstractMarusic et al. (J. Fluid Mech., vol. 716, 2013, R3) show the first clear evidence of universal logarithmic scaling emerging naturally (and simultaneously) in the mean velocity and the intensity of the streamwise velocity fluctuations about that mean in canonical turbulent flows near walls. These observations represent a significant advance in understanding of the behaviour of wall turbulence at high Reynolds number, but perhaps the most exciting implication of the experimental results lies in the agreement with the predictions of such scaling from a model introduced by Townsend (J. Fluid Mech., vol. 11, 1961, pp. 97–120), commonly termed the attached eddy hypothesis. The elegantly simple, yet powerful, study by Marusic et al. should spark further investigation of the behaviour of all fluctuating velocity components at high Reynolds numbers and the outstanding predictions of the attached eddy hypothesis.

Sign in / Sign up

Export Citation Format

Share Document