scholarly journals Effect of turbulent fluctuations on the drag and lift forces on a towed sphere and its boundary layer

2013 ◽  
Vol 721 ◽  
pp. 155-179 ◽  
Author(s):  
Holger Homann ◽  
Jérémie Bec ◽  
Rainer Grauer
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Spherical Particle ◽  
Drag Force ◽  
Turbulent Regime ◽  
Mean Velocity ◽  
Turbulent Fluctuations ◽  
The Mean ◽  
Lift Forces ◽  
Drag And Lift

AbstractThe impact of turbulent fluctuations on the forces exerted by a fluid on a towed spherical particle is investigated by means of high-resolution direct numerical simulations. The measurements are carried out using a novel scheme to integrate the two-way coupling between the particle and the incompressible surrounding fluid flow maintained in a high-Reynolds-number turbulent regime. The main idea consists of combining a Fourier pseudo-spectral method for the fluid with an immersed-boundary technique to impose the no-slip boundary condition on the surface of the particle. This scheme is shown to converge as the power $3/ 2$ of the spatial resolution. This behaviour is explained by the ${L}_{2} $ convergence of the Fourier representation of a velocity field displaying discontinuities of its derivative. Benchmarking of the code is performed by measuring the drag and lift coefficients and the torque-free rotation rate of a spherical particle in various configurations of an upstream-laminar carrier flow. Such studies show a good agreement with experimental and numerical measurements from other groups. A study of the turbulent wake downstream of the sphere is also reported. The mean velocity deficit is shown to behave as the inverse of the distance from the particle, as predicted from classical similarity analysis. This law is reinterpreted in terms of the principle of ‘permanence of large eddies’ that relates infrared asymptotic self-similarity to the law of decay of energy in homogeneous turbulence. The developed method is then used to attack the problem of an upstream flow that is in a developed turbulent regime. It is shown that the average drag force increases as a function of the turbulent intensity and the particle Reynolds number. This increase is significantly larger than predicted by standard drag correlations based on laminar upstream flows. It is found that the relevant parameter is the ratio of the viscous boundary layer thickness to the dissipation scale of the ambient turbulent flow. The drag enhancement can be motivated by the modification of the mean velocity and pressure profile around the sphere by small-scale turbulent fluctuations. It is demonstrated that the variance of the drag force fluctuations can be modelled by means of standard drag correlations. Temporal correlations of the drag and lift forces are also presented.

Can a turbulent boundary layer become independent of the Reynolds number?

2018 ◽  
Vol 851 ◽  
pp. 1-22 ◽  
Author(s):  
L. Djenidi ◽  
K. M. Talluru ◽  
R. A. Antonia
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Rough Wall ◽  
Asymptotic State ◽  
Stream Velocity ◽  
Mean Velocity ◽  
Independent State ◽  
Velocity Defect ◽  
The Mean

This paper examines the Reynolds number ($Re$) dependence of a zero-pressure-gradient (ZPG) turbulent boundary layer (TBL) which develops over a two-dimensional rough wall with a view to ascertaining whether this type of boundary layer can become independent of $Re$. Measurements are made using hot-wire anemometry over a rough wall that consists of a periodic arrangement of cylindrical rods with a streamwise spacing of eight times the rod diameter. The present results, together with those obtained over a sand-grain roughness at high Reynolds number, indicate that a $Re$-independent state can be achieved at a moderate $Re$. However, it is also found that the mean velocity distributions over different roughness geometries do not collapse when normalised by appropriate velocity and length scales. This lack of collapse is attributed to the difference in the drag coefficient between these geometries. We also show that the collapse of the $U_{\unicode[STIX]{x1D70F}}$-normalised mean velocity defect profiles may not necessarily reflect $Re$-independence. A better indicator of the asymptotic state of $Re$ is the mean velocity defect profile normalised by the free-stream velocity and plotted as a function of $y/\unicode[STIX]{x1D6FF}$, where $y$ is the vertical distance from the wall and $\unicode[STIX]{x1D6FF}$ is the boundary layer thickness. This is well supported by the measurements.

Reynolds-number scaling of the flat-plate turbulent boundary layer

2000 ◽  
Vol 422 ◽  
pp. 319-346 ◽  
Author(s):  
DAVID B. DE GRAAFF ◽  
JOHN K. EATON
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Flat Plate ◽  
Extensive Study ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Mean Velocity ◽  
Law Of The Wall ◽  
The Mean

Despite extensive study, there remain significant questions about the Reynolds-number scaling of the zero-pressure-gradient flat-plate turbulent boundary layer. While the mean flow is generally accepted to follow the law of the wall, there is little consensus about the scaling of the Reynolds normal stresses, except that there are Reynolds-number effects even very close to the wall. Using a low-speed, high-Reynolds-number facility and a high-resolution laser-Doppler anemometer, we have measured Reynolds stresses for a flat-plate turbulent boundary layer from Reθ = 1430 to 31 000. Profiles of u′2, v′2, and u′v′ show reasonably good collapse with Reynolds number: u′2 in a new scaling, and v′2 and u′v′ in classic inner scaling. The log law provides a reasonably accurate universal profile for the mean velocity in the inner region.

Experimental Investigation of the Effect of Upstream Conditions on Smooth and Rough Zero Pressure Gradient Turbulent Boundary Layer Flows at Very High Reynolds Numbers

2002 ◽  
Author(s):  
Luciano Castillo ◽  
Junghwa Seo ◽  
T. Gunnar Johansson ◽  
Horia Hangan
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Wind Tunnel ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Reynolds Stresses ◽  
Mean Velocity ◽  
The Mean ◽  
High Reynolds ◽  
Very High

A 2D turbulent boundary layer experiment in a zero pressure gradient (ZPG) has been carried out using two cross hot-wire probes. The mean velocity and all non-zero Reynolds stresses were measured in a number of positions, 14–28 m from the inlet of the wind tunnel over a rough and a smooth surface. Wind tunnel speeds of 10 m/s and 20 m/s were set up in order to test the effect of the upstream conditions on the downstream flow. The long test section allowed us to investigate the mean velocity and Reynolds stresses dependence on the local Reynolds number and the initial conditions at very high Reynolds number (i.e. Rθ ∼ 120,000). Furthermore, it will be shown that the mean velocity deficit profiles and some of the Reynolds stresses collapse when the upstream conditions are kept fixed for smooth and rough surface.

Behavior of Separation Bubble and Reattached Boundary Layer Around a Circular Leading Edge

1994 ◽  
Author(s):  
B. K. Hazarika ◽  
C. Hirsch
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Separation Bubble ◽  
Low Frequency ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Mean Velocity ◽  
Low Frequency Oscillations ◽  
Lower Reynolds Number ◽  
The Mean

The flow around a circular leading edge airfoil is investigated in an incompressible, low turbulence freestream. Hot-wire measurements are performed through the separation bubble, the reattachment and the recovery region till development of the fully turbulent boundary layer. The results of the experiments in the range of Reynolds numbers 1.7×103 to 11.8×103 are analysed and presented in this paper. A separation bubble is present near the leading edge at all Reynolds numbers. At the lowest Reynolds number investigated, the transition is preceded by strong low frequency oscillations. The correlation given by Mayle for prediction of transition of short separation bubbles is successful at the lower Reynolds number cases. The length of the separation bubble reduces considerably with increasing Reynolds number in the range investigated. The turbulence in the reattached flow persists even when the Reynolds number based on momentum thickness of the reattached boundary layer is small. The recovery length of the reattached layer is relatively short and the mean velocity profile follows logarithmic law within a short distance downstream of the reattachment point and the friction coefficient conforms to Prandtl-Schlichting skin-friction formula for a smooth flat plate at zero incidence.

scholarly journals On the boundary layer structure on suction side of an airfoil

2019 ◽  
Vol 213 ◽  
pp. 02088
Author(s):  
Václav Uruba ◽  
Pavel Procházka ◽  
Vladislav Skála
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Velocity Field ◽  
Layer Structure ◽  
Suction Side ◽  
Streamwise Direction ◽  
Mean Velocity ◽  
Time Resolved ◽  
Piv Technique ◽  
The Mean

The structure of boundary layer on an airfoil suction side was studied using stereo time resolved PIV technique experimentally in low Reynolds number, about 33 thousands. The mean velocity field is close to the 2D case, however the instantaneous structure is highly dynamical and 3D. Dynamics of the vortices in the boundary layer has been analysed using POD method. The results show lag of coherence in the streamwise direction, oblique patterns are detected instead.

scholarly journals A theory for the streamwise turbulent fluctuations in high Reynolds number pipe flow

2012 ◽  
Vol 707 ◽  
pp. 575-584 ◽  
Author(s):  
Marcus Hultmark
Keyword(s):  
Experimental Data ◽  
Reynolds Number ◽  
Pipe Flow ◽  
High Reynolds Number ◽  
Mean Flow ◽  
Mean Velocity ◽  
Theoretical Derivation ◽  
Turbulent Fluctuations ◽  
The Mean ◽  
High Reynolds

AbstractA new theory for the streamwise turbulent fluctuations in fully developed pipe flow is proposed. The theory extends the similarities between the mean flow and the streamwise turbulence fluctuations, as observed in experimental high Reynolds number data, to also include the theoretical derivation. Connecting the derivation of the fluctuations to that of the mean velocity at finite Reynolds number as introduced by Wosnik, Castillo & George (J. Fluid Mech., vol. 421, 2000, pp. 115–145) can explain the logarithmic behaviour as well as the coefficient of the logarithm. The slope of the logarithm, for the fluctuations, depends on the increase of the fluctuations with Reynolds number, which is shown to agree very well with the experimental data. A mesolayer, similar to that introduced by Wosnik et al., exists for the fluctuations for $300\gt {y}^{+ } \gt 800$, which coincides with the mesolayer for the mean velocities. In the mesolayer, the flow is still affected by viscosity, which shows up as a decrease in the fluctuations.

EXPERIMENTAL INVESTIGATION OF FLOW RESPONSE TO STATIONARY DISTURBANCE IN ROTATING-DISK FLOW

2019 ◽  
Vol XVI (2) ◽  
pp. 13-22
Author(s):  
Muhammad Ehtisham Siddiqui
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Careful Analysis ◽  
Laboratory Frame ◽  
Transition To Turbulence ◽  
Turbulent Regime ◽  
Mean Velocity ◽  
Layer Flow

Three-dimensional boundary-layer flow is well known for its abrupt and sharp transition from laminar to turbulent regime. The presented study is a first attempt to achieve the target of delaying the natural transition to turbulence. The behaviour of two different shaped and sized stationary disturbances (in the laboratory frame) on the rotating-disk boundary layer flow is investigated. These disturbances are placed at dimensionless radial location (Rf = 340) which lies within the convectively unstable zone over a rotating-disk. Mean velocity profiles were measured using constant-temperature hot-wire anemometry. By careful analysis of experimental data, the instability of these disturbance wakes and its estimated orientation within the boundary-layer were investigated.

The flow of liquid in a stream from the standard turbine impeller

1979 ◽  
Vol 44 (3) ◽  
pp. 700-710 ◽  
Author(s):  
Ivan Fořt ◽  
Hans-Otto Möckel ◽  
Jan Drbohlav ◽  
Miroslav Hrach
Keyword(s):  
Reynolds Number ◽  
Kinematic Viscosity ◽  
Momentum Flux ◽  
Relative Size ◽  
Mean Velocity ◽  
Axial Profile ◽  
The Mean ◽  
Hot Film ◽  
Turbine Impeller

Profiles of the mean velocity have been analyzed in the stream streaking from the region of rotating standard six-blade disc turbine impeller. The profiles were obtained experimentally using a hot film thermoanemometer probe. The results of the analysis is the determination of the effect of relative size of the impeller and vessel and the kinematic viscosity of the charge on three parameters of the axial profile of the mean velocity in the examined stream. No significant change of the parameter of width of the examined stream and the momentum flux in the stream has been found in the range of parameters d/D ##m <0.25; 0.50> and the Reynolds number for mixing ReM ##m <2.90 . 101; 1 . 105>. However, a significant influence has been found of ReM (at negligible effect of d/D) on the size of the hypothetical source of motion - the radius of the tangential cylindrical jet - a. The proposed phenomenological model of the turbulent stream in region of turbine impeller has been found adequate for values of ReM exceeding 1.0 . 103.

The structure of a highly decelerated axisymmetric turbulent boundary layer

2021 ◽  
Vol 929 ◽  
Author(s):  
N. Agastya Balantrapu ◽  
Christopher Hickling ◽  
W. Nathan Alexander ◽  
William Devenport
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Shear Layer ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Large Scale ◽  
Convection Velocity ◽  
Mean Flow ◽  
Mean Velocity ◽  
The Mean

Experiments were performed over a body of revolution at a length-based Reynolds number of 1.9 million. While the lateral curvature parameters are moderate ( $\delta /r_s < 2, r_s^+>500$ , where $\delta$ is the boundary layer thickness and r s is the radius of curvature), the pressure gradient is increasingly adverse ( $\beta _{C} \in [5 \text {--} 18]$ where $\beta_{C}$ is Clauser’s pressure gradient parameter), representative of vehicle-relevant conditions. The mean flow in the outer regions of this fully attached boundary layer displays some properties of a free-shear layer, with the mean-velocity and turbulence intensity profiles attaining self-similarity with the ‘embedded shear layer’ scaling (Schatzman & Thomas, J. Fluid Mech., vol. 815, 2017, pp. 592–642). Spectral analysis of the streamwise turbulence revealed that, as the mean flow decelerates, the large-scale motions energize across the boundary layer, growing proportionally with the boundary layer thickness. When scaled with the shear layer parameters, the distribution of the energy in the low-frequency region is approximately self-similar, emphasizing the role of the embedded shear layer in the large-scale motions. The correlation structure of the boundary layer is discussed at length to supply information towards the development of turbulence and aeroacoustic models. One major finding is that the estimation of integral turbulence length scales from single-point measurements, via Taylor's hypothesis, requires significant corrections to the convection velocity in the inner 50 % of the boundary layer. The apparent convection velocity (estimated from the ratio of integral length scale to the time scale), is approximately 40 % greater than the local mean velocity, suggesting the turbulence is convected much faster than previously thought. Closer to the wall even higher corrections are required.

scholarly journals Global energy fluxes in turbulent channels with flow control

2018 ◽  
Vol 857 ◽  
pp. 345-373 ◽  
Author(s):  
Davide Gatti ◽  
Andrea Cimarelli ◽  
Yosuke Hasegawa ◽  
Bettina Frohnapfel ◽  
Maurizio Quadrio
Keyword(s):  
Reynolds Number ◽  
Shear Stress ◽  
Energy Dissipation ◽  
Velocity Field ◽  
Flow Control ◽  
Reynolds Shear Stress ◽  
Power Input ◽  
Energy Fluxes ◽  
Mean Velocity ◽  
The Mean

This paper addresses the integral energy fluxes in natural and controlled turbulent channel flows, where active skin-friction drag reduction techniques allow a more efficient use of the available power. We study whether the increased efficiency shows any general trend in how energy is dissipated by the mean velocity field (mean dissipation) and by the fluctuating velocity field (turbulent dissipation). Direct numerical simulations (DNS) of different control strategies are performed at constant power input (CPI), so that at statistical equilibrium, each flow (either uncontrolled or controlled by different means) has the same power input, hence the same global energy flux and, by definition, the same total energy dissipation rate. The simulations reveal that changes in mean and turbulent energy dissipation rates can be of either sign in a successfully controlled flow. A quantitative description of these changes is made possible by a new decomposition of the total dissipation, stemming from an extended Reynolds decomposition, where the mean velocity is split into a laminar component and a deviation from it. Thanks to the analytical expressions of the laminar quantities, exact relationships are derived that link the achieved flow rate increase and all energy fluxes in the flow system with two wall-normal integrals of the Reynolds shear stress and the Reynolds number. The dependence of the energy fluxes on the Reynolds number is elucidated with a simple model in which the control-dependent changes of the Reynolds shear stress are accounted for via a modification of the mean velocity profile. The physical meaning of the energy fluxes stemming from the new decomposition unveils their inter-relations and connection to flow control, so that a clear target for flow control can be identified.

Sign in / Sign up

Export Citation Format

Share Document