Correlation of Constant Pressure Turbulent Boundary Layer Measurements on Insulated Walls

1969 ◽  
Vol 20 (2) ◽  
pp. 151-170 ◽  
Author(s):  
J. A. P. Stoddart

SummaryMeasured characteristics of compressible constant pressure adiabatic turbulent boundary layers are correlated in an incompressible frame of reference with the aid of a modification of the well known Mager compressibility transformation. Quite good data collapse is obtained although the transformation is shown to be deficient in the outer regions of the boundary layer. The results will be used to produce data sheets of constant pressure adiabatic turbulent boundary layer properties.

1969 ◽  
Vol 73 (698) ◽  
pp. 143-147 ◽  
Author(s):  
M. K. Bull

Although a numerical solution of the turbulent boundary-layer equations has been achieved by Mellor and Gibson for equilibrium layers, there are many occasions on which it is desirable to have closed-form expressions representing the velocity profile. Probably the best known and most widely used representation of both equilibrium and non-equilibrium layers is that of Coles. However, when velocity profiles are examined in detail it becomes apparent that considerable care is necessary in applying Coles's formulation, and it seems to be worthwhile to draw attention to some of the errors and inconsistencies which may arise if care is not exercised. This will be done mainly by the consideration of experimental data. In the work on constant pressure layers, emphasis tends to fall heavily on the author's own data previously reported in ref. 1, because the details of the measurements are readily available; other experimental work is introduced where the required values can be obtained easily from the published papers.


1966 ◽  
Vol 8 (4) ◽  
pp. 426-436 ◽  
Author(s):  
A. D. Carmichael ◽  
G. N. Pustintsev

Methods of predicting the growth of turbulent boundary layers in conical diffusers using the kinetic-energy deficit equation were developed. Three different forms of auxiliary equations were used. Comparison between the measured and predicted results showed that there was fair agreement although there was a tendency to underestimate the predicted momentum thickness and over-estimate the predicted shape factor.


1968 ◽  
Vol 10 (5) ◽  
pp. 426-433 ◽  
Author(s):  
F. C. Lockwood

The momentum equation is solved numerically for a suggested ramp variation of the Prandtl mixing length across an equilibrium-turbulent boundary layer. The predictions of several important boundary-layer functions are compared with the equilibrium experimental data. Comparisons are also made with some recent universal recommendations for turbulent boundary layers since the equilibrium experimental data are limited. Good agreement is found between the predictions, the experimental data, and the recommendations.


2006 ◽  
Vol 129 (4) ◽  
pp. 441-448 ◽  
Author(s):  
Kunlun Liu ◽  
Richard H. Pletcher

Two compressible turbulent boundary layers have been calculated by using direct numerical simulation. One case is a subsonic turbulent boundary layer with constant wall temperature for which the wall temperature is 1.58 times the freestream temperature and the other is a supersonic adiabatic turbulent boundary layer subjected to a supersonic freestream with a Mach number 1.8. The purpose of this study is to test the strong Reynolds analogy (SRA), the Van Driest transformation, and the applicability of Morkovin’s hypothesis. For the first case, the influence of the variable density effects will be addressed. For the second case, the role of the density fluctuations, the turbulent Mach number, and dilatation on the compressibility will be investigated. The results show that the Van Driest transformation and the SRA are satisfied for both of the flows. Use of local properties enable the statistical curves to collapse toward the corresponding incompressible curves. These facts reveal that both the compressibility and variable density effects satisfy the similarity laws. A study about the differences between the compressibility effects and the variable density effects associated with heat transfer is performed. In addition, the difference between the Favre average and Reynolds average is measured, and the SGS terms of the Favre-filtered Navier-Stokes equations are calculated and analyzed.


1958 ◽  
Vol 62 (567) ◽  
pp. 215-219
Author(s):  
T. J. Black

A New type of auxiliary equation is given for calculating the development of the form-parameter H in turbulent boundary layers with adverse pressure gradients. The chief advantage of this new method lies in the rapidity and ease of calculation which has been achieved, without apparent sacrifice of accuracy.Whereas the growth of momentum thickness in the turbulent boundary layer can now be rapidly calculated by methods involving only simple quadrature, the prediction of the form parameter development remains a laborious task, while the results obtained do not always appear to justify the complexity of the calculations.


2013 ◽  
Vol 737 ◽  
pp. 329-348 ◽  
Author(s):  
Shivsai Ajit Dixit ◽  
O. N. Ramesh

AbstractScaling of the streamwise velocity spectrum ${\phi }_{11} ({k}_{1} )$ in the so-called sink-flow turbulent boundary layer is investigated in this work. The present experiments show strong evidence for the ${ k}_{1}^{- 1} $ scaling i.e. ${\phi }_{11} ({k}_{1} )= {A}_{1} { U}_{\tau }^{2} { k}_{1}^{- 1} $, where ${k}_{1} $ is the streamwise wavenumber and ${U}_{\tau } $ is the friction velocity. Interestingly, this ${ k}_{1}^{- 1} $ scaling is observed much farther from the wall and at much lower flow Reynolds number (both differing by almost an order of magnitude) than what the expectations from experiments on a zero-pressure-gradient turbulent boundary layer flow would suggest. Furthermore, the coefficient ${A}_{1} $ in the present sink-flow data is seen to be non-universal, i.e. ${A}_{1} $ varies with height from the wall; the scaling exponent −1 remains universal. Logarithmic variation of the so-called longitudinal structure function, which is the physical-space counterpart of spectral ${ k}_{1}^{- 1} $ scaling, is also seen to be non-universal, consistent with the non-universality of ${A}_{1} $. These observations are to be contrasted with the universal value of ${A}_{1} $ (along with the universal scaling exponent of −1) reported in the literature on zero-pressure-gradient turbulent boundary layers. Theoretical arguments based on dimensional analysis indicate that the presence of a streamwise pressure gradient in sink-flow turbulent boundary layers makes the coefficient ${A}_{1} $ non-universal while leaving the scaling exponent −1 unaffected. This effect of the pressure gradient on the streamwise spectra, as discussed in the present study (experiments as well as theory), is consistent with other recent studies in the literature that are focused on the structural aspects of turbulent boundary layer flows in pressure gradients (Harun et al., J. Fluid Mech., vol. 715, 2013, pp. 477–498); the present paper establishes the link between these two. The variability of ${A}_{1} $ accommodated in the present framework serves to clarify the ideas of universality of the ${ k}_{1}^{- 1} $ scaling.


1962 ◽  
Vol 84 (1) ◽  
pp. 45-54 ◽  
Author(s):  
R. A. Seban ◽  
L. H. Back

Velocity and temperature profiles are presented for the turbulent boundary layer downstream of a tangential injection slot for the further clarification of the film-cooling problem. The profiles refer primarily to an injection mass velocity of 0.36 times that of the free stream; these and other auxiliary results demonstrate a complex hydrodynamic and relatively simple thermal behavior in which the temperature profiles appear to be similar in all cases. By using this correspondence together with the approximation of a fully developed hydrodynamic layer in most of the downstream region, it is possible to rationalize the adiabatic wall temperatures that have been presented previously.


2014 ◽  
Vol 136 (5) ◽  
Author(s):  
Jessica M. Walker

Smooth and rough wall turbulent boundary layer profiles are frequently scaled using the wall shear velocity u*, thus it is important that u* is accurately known. This paper reviews and assesses several wall similarity techniques to determine u* and compares results with data from the total stress, Preston tube, and direct force methods. The performance of each method was investigated using experimental repeatability data of smooth and rough wall turbulent boundary layer profiles at Reθ of 3330 and 4840, respectively, obtained using laser Doppler velocimetry (LDV) in a recirculating water tunnel. To validate the results, an analysis was also performed on the direct numerical simulation (DNS) data of Jimenez et al. (2010, “Turbulent Boundary Layers and Channels at Moderate Reynolds Numbers,” J. Fluid Mech., 657, pp. 335–360) at Reθ = 1968. The inner layer similarity methods of Bradshaw had low experimental uncertainty and accurately determined u* and ε for the DNS data and are the recommended wall similarity methods for turbulent boundary layer profile analysis. The outer layer similarity methods did not perform well, due to the need to simultaneously solve for three parameters: u*, ε, and Π. It is strongly recommended that the u* values determined using wall similarity techniques are independently verified using another method such as the total stress or direct force methods.


1990 ◽  
Vol 221 ◽  
pp. 131-159 ◽  
Author(s):  
G. J. Brereton ◽  
W. C. Reynolds ◽  
R. Jayaraman

In this paper, selected findings of a detailed experimental investigation are reported concerning the effects of forced free-stream unsteadiness on a turbulent boundary layer. The forced unsteadiness was sinusoidal and was superimposed locally on an otherwise-steady mainstream, beyond a turbulent boundary layer which had developed under constant-pressure conditions. Within the region over which free-stream unsteadiness was induced, the sinusoidal variation in pressure gradient was between extremes of zero and a positive value, with a positive average level. The local response of the boundary layer to these free-stream effects was studied through simultaneous measurements of the u- and v-components of the velocity fieldAlthough extensive studies of unsteady, turbulent, fully-developed pipe and channel flow have been carried out, the problem of a developing turbulent boundary layer and its response to forced free-stream unsteadiness has received comparatively little attention. The present study is intended to redress this imbalance and, when contrasted with other studies of unsteady turbulent boundary layers, is unique in that: (i) it features an appreciable amplitude of mainstream modulation at a large number of frequencies of forced unsteadiness, (ii) its measurements are both detailed and of high spatial resolution, so that the near-wall behaviour of the flow can be discerned, and (iii) it allows local modulation of the mainstream beyond a turbulent boundary layer which has developed under the well-known conditions of steady, two-dimensional, constant-pressure flowResults are reported which allow comparison of the behaviour of boundary layers under the same mean external conditions, but with different time dependence in their free-stream velocities. These time dependences correspond to: (i) steady flow, (ii) quasi-steadily varying flow, and (iii) unsteady flow at different frequencies of mainstream unsteadiness. Experimental results focus upon the time-averaged nature of the flow; they indicate that the mean structure of the turbulent boundary layer is sufficiently robust that the imposition of free-stream unsteadiness results only in minor differences relative to the mean character of the steady flow, even at frequencies for which the momentary condition of the flow departs substantially from its quasi-steady state. Mean levels of turbulence production are likewise unaffected by free-stream unsteadiness and temporal production of turbulence appears to result only from modulation of the motions which contribute to turbulence production as a time-averaged measure.


Sign in / Sign up

Export Citation Format

Share Document