The effect of application of nitrogen fertilizer on the growth of opium poppy in north central India

1984 ◽  
Vol 102 (2) ◽  
pp. 361-366 ◽  
Author(s):  
R. L. Yadav ◽  
R. Mohan ◽  
R. Singh ◽  
R. K. Verma
Keyword(s):  
Dry Matter ◽  
Stem Elongation ◽  
N Uptake ◽  
Central India ◽  
Papaver Somniferum ◽  
Opium Poppy ◽  
Dry Matter Accumulation ◽  
N Application ◽  
Area Index ◽  
North Central

SummaryIn a 2-year field study conducted at Lucknow (26·5° N, 80·5° E and 120 m altitude), plant height, leaf area index, dry-matter accumulation and N uptake of opium poppy (Papaver somniferum L.) followed a sigmoid path. After attaining a peak of accumulation at 120 days, dry matter declined in plots given N fertilizer but remained static in the control. N application (50, 100, 150 and 200 kg/ha) increased the opium, seed and morphine yields compared with the control. Morphine concentration (%) in the opium, however, increased up to 100 kg N/ha and decreased when N doses exceeded that level. Divided application of N, i.e. half at sowing and remainder at the stem elongation stage, proved beneficial for opium, seed and morphine yields.

Growth, Opium Gum Yield, and Photoperiod Response in Five Opium Poppy (Papaver somniferum L.) Cultivars

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 481d-481
Author(s):  
Z. Wang ◽  
M.C. Acock ◽  
B. Acock
Keyword(s):  
Flowering Time ◽  
Dry Matter ◽  
Dry Weight ◽  
Papaver Somniferum ◽  
Opium Poppy ◽  
Photoperiod Response ◽  
Asian Countries ◽  
Critical Photoperiod ◽  
Growth Chambers ◽  
Positive Correlations

To develop models for estimating growth, flowering time and gum yield of opium poppy, we compared variability among five cultivars (T, L, B1, B2, B3) from different latitudes in three Southeast Asian countries. Variability in the relationships between gum yield, capsule volume, and dry weight was also examined. Plants were grown in six growth chambers at a 11-, 12-, 13-, 14-, 15-, or 16-h photoperiod (PP) with a 12-h 25/20 °C thermoperiod. The main capsule was lanced for opium gum at 10, 13, and 16 d after flowering (DAF). Plants were harvested at 21 DAF and separated into leaves, stems, and capsules. Flowering time for B2 was affected least by PP and B1 the most. Flowering times for B3, L, and T were similar across the range of PPs. All cultivars showed a significant increase in flowering time from 14 to 13 h PP. Cultivars that flowered late (such as B1) had greater biomass than those that flowered earlier. However, cultivars that flowered earlier (such as L) had more dry matter partitioned into capsule than late-flowering ones. B2, B3, and L had the highest gum yields while B1 had the lowest. Positive correlations were found between gum dry weight and capsule volume (or dry weight) for T and L, but no correlations were observed between these variables for B1, B2, and B3. Our results indicated that plant dry weight varied as much as 77% and flowering time varied up to 40% even though the critical photoperiod was the same for all cultivars. The ratio of gum yield to capsule dry weight were significantly different between B1 and T.

Nitrogen Demand of Cut Chrysanthemums in Relation to Shoot Height and Planting Date

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 523c-523
Author(s):  
Siegfried Zerche
Keyword(s):  
Dry Matter ◽  
Plant Density ◽  
Plant Biomass ◽  
N Uptake ◽  
Planting Date ◽  
Dry Matter Accumulation ◽  
Planting Dates ◽  
Shoot Height ◽  
Climate Conditions ◽  
Growing Period

Refined nutrient delivery systems are important for environmentally friendly production of cut flowers in both soil and hydroponic culture. They have to be closely orientated at the actual nutrient demand. To solve current problems, express analysis and nutrient uptake models have been developed in horticulture. However, the necessity of relatively laborious analysis or estimation of model input parameters have prevented their commercial use up to now. For this reason, we studied relationships between easily determinable parameters of plant biomass structure as shoot height, plant density and dry matter production as well as amount of nitrogen removal of hydroponically grown year-round cut chrysanthemums. In four experiments (planting dates 5.11.91; 25.3.92; 4.1.93; 1.7.93) with cultivar `Puma white' and a fixed plant density of 64 m2, shoots were harvested every 14 days from planting until flowering, with dry matter, internal N concentration and shoot height being measured. For each planting date, N uptake (y) was closely (r2 = 0.94; 0.93; 0.84; 0.93, respectively) related to shoot height (x) at the time of cutting and could be characterized by the equation y = a * × b. In the soilless cultivation system, dry matter concentrations of N remained constant over the whole growing period, indicating non-limiting nitrogen supply. In agreement with constant internal N concentrations, N uptake was linearly related (r2 = 0.94 to 0.99) to dry matter accumulation. It is concluded that shoot height is a useful parameter to include in a simple model of N uptake. However, in consideration of fluctuating greenhouse climate conditions needs more sophisticated approaches including processes such as water uptake and photosynthetically active radiation.

scholarly journals The nitrogen topdressing mode of indica-japonica and indica hybrid rice are different after side-deep fertilization with machine transplanting

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xiaodan Wang ◽  
Yaliang Wang ◽  
Yuping Zhang ◽  
Jing Xiang ◽  
Yikai Zhang ◽  
...  
Keyword(s):  
Single Dose ◽  
Controlled Release ◽  
Nitrogen Uptake ◽  
Dry Matter ◽  
Hybrid Rice ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Quick Release ◽  
Significant Difference ◽  
Spikelets Per Panicle

AbstractDetermination of the optimal fertilization method is crucial to maximize nitrogen use efficiency and yield of different rice cultivars. Side-deep fertilization with controlled-release nitrogen, in conjunction with machine transplanting and subsequent topdressing, was applied to Indica–japonica hybrid rice ‘Yongyou1540’ (YY1540) and indica hybrid rice ‘Tianyouhuazhan’ (TYHZ). Four nitrogen treatments were applied in 2018 and 2019: traditional nitrogen application with quick-release nitrogen (T1), single-dose deep fertilization at transplanting with 100% controlled-release nitrogen (T2), and deep fertilization of 70% controlled-release nitrogen and topdressing of 30% quick nitrogen at tillering (T3), or at panicle initiation (T4). Side-deep fertilization reduced the fertilizer application frequency without causing yield loss, T4 enhanced the yield of YY1540 by increasing the number of productive tillers and number of spikelets per panicle compared with T1, T2 and T3. The yield of TYHZ showed no significant difference among treatments. The T4 treatment decreased the number of tillers at the tilling peak stage and increased the percentage productive tillers and number of differentiated spikelets. Compared with the other treatments, T4 increased dry matter accumulation and leaf area index during panicle initiation and grain ripening, and contributed to enhanced nitrogen uptake and nitrogen utilization in YY1540. On average, nitrogen uptake and utilization in YY1540 were highest in T4, but no significant differences among treatments were observed in TYHZ. Dry matter accumulation and nitrogen uptake from panicle initiation to heading of YY1540 were correlated with number of spikelets per panicle, but no significant correlations were observed for TYHZ. Supplementary topdressing with quick-release nitrogen at the panicle initiation stage was required to increase yield of indica–japonica hybrid rice, whereas single-dose deep fertilization with controlled-release nitrogen is satisfactory for the indica hybrid cultivar.

RESPONSE OF PEAS TO ENVIRONMENT: II. EFFECTS OF TEMPERATURE IN CONTROLLED-ENVIRONMENT CABINETS

1966 ◽  
Vol 46 (2) ◽  
pp. 195-203 ◽  
Author(s):  
B. Stanfield ◽  
D. P. Ormrod ◽  
H. F. Fletcher
Keyword(s):  
Plant Development ◽  
Dry Matter ◽  
Accumulation Rate ◽  
Stem Elongation ◽  
Controlled Environment ◽  
Dry Matter Accumulation ◽  
Average Temperature ◽  
Pisum Sativum L ◽  
Temperature Regimes ◽  
Effects Of Temperature

Effects of day/night temperature regimes from 7/4 to 32/24 °C on growth and development of Pisum sativum L. var. Dark Skin Perfection were studied in controlled-environment cabinets. Light intensity was about 1500 foot-candles and the photoperiod was 16 hours. Rate of plant development, in terms of nodes produced per day, increased steadily as the average temperature increased. Rate of stem elongation, however, was most rapid at 21/13 °C; and plant height was greatest at 16/10 °C. On a dry matter accumulation rate basis, vine growth decreased above and below a temperature optimum which shifted from 21/16 to 16/10 °C in the course of plant development. The combination of high day and high night temperatures caused an increase in the number of nodes to the first flower. Tillering was most prolific at the lower temperatures and was absent at 32 °C day temperatures. Pea yield decreased as temperature increased above 16/10 °C, due mainly to a reduction in the number of pods per plant.

Source-sink optimization and morpho-physiological response of soybean [Glycine max] to detopping and mepiquat chloride application

2018 ◽  
Author(s):  
Manpreet Jaidka ◽  
J.S. Deol ◽  
Ramanjit Kaur ◽  
R. Sikka
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Mepiquat Chloride ◽  
Area Index ◽  
Stover Yield ◽  
Source Sink ◽  
Pod Length ◽  
100 Seed Weight

Effect of detopping and mepiquat chloride on morphological, physiological and yield attributes of soybean cultivar ‘SL 544’ was studied. A two year investigation was conducted at Punjab Agricultural University, Ludhiana, during kharif seasons of 2014 and 2015. The experiment was laid-out in randomized complete block design (RCBD) with eight treatments viz. control, detopping (removal of 4-5 cm apical portion of main stem) at 50-55 days after sowing (DAS), mepiquat chloride @ 200 ppm (50-55 DAS), mepiquat chloride @ 200 ppm (50-55 + 65-70 DAS), mepiquat chloride 250 ppm (50-55 DAS), mepiquat chloride @ 250 ppm (50-55 + 65-70 DAS), mepiquat chloride @ 300 ppm (50-55 DAS) and mepiquat chloride @ 300 ppm (50-55 + 65-70 DAS) with four replications. Detopping had a non-significant effect on leaf area index, SPAD value, PAR interception, abscission of reproductive parts, seeds per pod, 100-seed weight, pod length and stover yield of soybean. It significantly decreased plant height, increased total dry matter accumulation/plant, number of flowers and pods/plant, pod setting percentage and seed yield over control during 2014 and 2015. At crop harvest, detopping developed optimized source-sink relationship by means of distribution of total dry matter between stem, foliage and pods by 20.4, 14.9 and 64.6 % during 2014 while 22.6, 20.1 and 57.4 % during 2015, respectively. Mepiquat chloride posed a non-significant effect on plant height, PAR interception, number of flowers/plant, number of seeds/pod, pod length and stover yield of soybean but it significantly decreased leaf area index, abscission of reproductive parts while increased the dry matter accumulation/plant, number of pods/plant, 100-seed weight and seed yield relative to control. At harvest, two foliar applications of mepiquat chloride @ 250 ppm resulted in optimized source-sink relationship by the distribution of total dry matter among stem, foliage and pods by 20.6, 10.9 and 68.5 % during 2014 while 19.5, 7.6 and 72.9 % during 2015, respectively. Occurrence of more rainfall during 2015 as compared to 2014 caused mepiquat chloride to hike seed yield as compared to detopping which is clearly witnessed by increase in pod dry weight per plant during 2015 than 2014. Conclusively, both detopping and mepiquat chloride resulted in enhancement in source-sink relationship and seed yield of soybean.

Dry matter accumulation and partitioning, and seed yield in indeterminate Andean lupin (Lupinus mutabilis Sweet)

1997 ◽  
Vol 48 (1) ◽  
pp. 91 ◽  
Author(s):  
A. Hardy ◽  
C. Huyghe ◽  
J. Papineau
Keyword(s):  
Seed Yield ◽  
Dry Matter ◽  
Plant Biomass ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Lupinus Mutabilis ◽  
Whole Plant ◽  
Agronomic Potential ◽  
Total Plant Biomass ◽  
Plant Maturity

Despite the high oil and protein content of the seeds, the agronomic potential of Lupinus mutabilis Sweet, a South American lupin species, is limited because of its low seed yield and its uncertain maturity. Dry matter accumulation and partitioning, and seed yield, of 2 genotypes (early-maturing LM34 and late-maturing LM268) were studied in 2 seasons at 2 densities at Lusignan, France. Total dry matter at harvest was, on average, 680 g/m2. The mainstem and first-order branches mainly contributed to total plant biomass but pods were only produced on the mainstem. On average, across the different crops, the maximum leaf area index (LAI) was 2· 8. The duration of LAI above 2·5 was short and not correlated with the total dry matter production. The partitioning of the dry matter varied according to the genotype. LM34 showed enhanced pod growth, its harvest index (HI) was 0·32, and seed yield averaged 1·28 t/ha. LM268 showed enhanced vegetative growth, both HI and seed yield were lower (0·16 and 1·13 t/ha, respectively), and whole plant maturity was never reached. For both genotypes during the pod filling, no remobilisation of assimilates occurred from stems to pods.

scholarly journals Effect Of Planting Geometry On Growth Of Rice Varieties

2017 ◽  
Vol 5 (4) ◽  
pp. 423-429 ◽  
Author(s):  
Mohan Mahato ◽  
Bishnu Bilas Adhikari
Keyword(s):  
Growth Rate ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Rice Varieties ◽  
Area Index ◽  
Crop Growth Rate ◽  
Planting Geometry

A field experiment was conducted under humid subtropical agro-climatic condition of Nepal during rainy season of 2014. The experiment was laid out in to two factor Randomized Complete Block Design with  three replications consisting three drought tolerant rice varieties (Sukhadhan-4, Sukhadhan-5 and Radha-4) and four planting geometry (15 cm × 10 cm, 15 cm × 15 cm, 20 cm × 15 cm and 20 cm × 20 cm). The results revealed that the highest plant height and maximum leaf area index was recorded in planting geometry 15 cm × 10 cm in all growth stages. Whereas, planting geometry 20 cm × 15 cm produced the maximum number of tiller m-2 in all growth stage.  While planting geometry 20 cm × 15 cm and 20 cm × 20 cm produced statistically similar crop growth rate and dry matter accumulation in all stage of growth. Regarding the varieties, Sukhadhan- 4 showed highest plant height up to 75 DAT and plant height was statistically similar to Radha - 4 in 60 and 75 DAT. But maximum number of tiller m-2, leaf area index, crop growth rate and dry matter accumulation were recorded in Sukhadhan – 5 varieties. Int. J. Appl. Sci. Biotechnol. Vol 5(4): 423-429

Sign in / Sign up

Export Citation Format

Share Document