Dry matter accumulation and partitioning, and seed yield in indeterminate Andean lupin (Lupinus mutabilis Sweet)

1997 ◽  
Vol 48 (1) ◽  
pp. 91 ◽  
Author(s):  
A. Hardy ◽  
C. Huyghe ◽  
J. Papineau
Keyword(s):  
Seed Yield ◽  
Dry Matter ◽  
Plant Biomass ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Lupinus Mutabilis ◽  
Whole Plant ◽  
Agronomic Potential ◽  
Total Plant Biomass ◽  
Plant Maturity

Despite the high oil and protein content of the seeds, the agronomic potential of Lupinus mutabilis Sweet, a South American lupin species, is limited because of its low seed yield and its uncertain maturity. Dry matter accumulation and partitioning, and seed yield, of 2 genotypes (early-maturing LM34 and late-maturing LM268) were studied in 2 seasons at 2 densities at Lusignan, France. Total dry matter at harvest was, on average, 680 g/m2. The mainstem and first-order branches mainly contributed to total plant biomass but pods were only produced on the mainstem. On average, across the different crops, the maximum leaf area index (LAI) was 2· 8. The duration of LAI above 2·5 was short and not correlated with the total dry matter production. The partitioning of the dry matter varied according to the genotype. LM34 showed enhanced pod growth, its harvest index (HI) was 0·32, and seed yield averaged 1·28 t/ha. LM268 showed enhanced vegetative growth, both HI and seed yield were lower (0·16 and 1·13 t/ha, respectively), and whole plant maturity was never reached. For both genotypes during the pod filling, no remobilisation of assimilates occurred from stems to pods.

Source-sink optimization and morpho-physiological response of soybean [Glycine max] to detopping and mepiquat chloride application

2018 ◽  
Author(s):  
Manpreet Jaidka ◽  
J.S. Deol ◽  
Ramanjit Kaur ◽  
R. Sikka
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Mepiquat Chloride ◽  
Area Index ◽  
Stover Yield ◽  
Source Sink ◽  
Pod Length ◽  
100 Seed Weight

Effect of detopping and mepiquat chloride on morphological, physiological and yield attributes of soybean cultivar ‘SL 544’ was studied. A two year investigation was conducted at Punjab Agricultural University, Ludhiana, during kharif seasons of 2014 and 2015. The experiment was laid-out in randomized complete block design (RCBD) with eight treatments viz. control, detopping (removal of 4-5 cm apical portion of main stem) at 50-55 days after sowing (DAS), mepiquat chloride @ 200 ppm (50-55 DAS), mepiquat chloride @ 200 ppm (50-55 + 65-70 DAS), mepiquat chloride 250 ppm (50-55 DAS), mepiquat chloride @ 250 ppm (50-55 + 65-70 DAS), mepiquat chloride @ 300 ppm (50-55 DAS) and mepiquat chloride @ 300 ppm (50-55 + 65-70 DAS) with four replications. Detopping had a non-significant effect on leaf area index, SPAD value, PAR interception, abscission of reproductive parts, seeds per pod, 100-seed weight, pod length and stover yield of soybean. It significantly decreased plant height, increased total dry matter accumulation/plant, number of flowers and pods/plant, pod setting percentage and seed yield over control during 2014 and 2015. At crop harvest, detopping developed optimized source-sink relationship by means of distribution of total dry matter between stem, foliage and pods by 20.4, 14.9 and 64.6 % during 2014 while 22.6, 20.1 and 57.4 % during 2015, respectively. Mepiquat chloride posed a non-significant effect on plant height, PAR interception, number of flowers/plant, number of seeds/pod, pod length and stover yield of soybean but it significantly decreased leaf area index, abscission of reproductive parts while increased the dry matter accumulation/plant, number of pods/plant, 100-seed weight and seed yield relative to control. At harvest, two foliar applications of mepiquat chloride @ 250 ppm resulted in optimized source-sink relationship by the distribution of total dry matter among stem, foliage and pods by 20.6, 10.9 and 68.5 % during 2014 while 19.5, 7.6 and 72.9 % during 2015, respectively. Occurrence of more rainfall during 2015 as compared to 2014 caused mepiquat chloride to hike seed yield as compared to detopping which is clearly witnessed by increase in pod dry weight per plant during 2015 than 2014. Conclusively, both detopping and mepiquat chloride resulted in enhancement in source-sink relationship and seed yield of soybean.

Influence of primed seed and varying seed rate on growth and productivity of soybean (Glycine max L.) under different planting techniques

2018 ◽  
Author(s):  
Rupinder Kaur Jassal ◽  
Harmeet Singh
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Seed Priming ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Active Radiation ◽  
Seed Rate

An experiment was conducted at Punjab Agricultural University, Ludhiana during 2015 and 2016 to study the effect of priming, different seed rate on growth and seed yield of soybean planted under bed and flat method. The study was planned in factorial split plot design, keeping two planting techniques (flat sowing and bed sowing) and two seed priming treatments ( non primed seeds and 100 ppm GA3 primed seeds) in main plot and three seed levels ( 50, 62.5 and 75 kg ha-1) in sub plot. The objective of the study was to evaluate the effect of seed priming on growth and productivity under different planting techniques with the use of varying seed rates. The results revealed that growth attributes viz. emergence count, plant height, dry matter accumulation, leaf area index and photosynthetic active radiation interception (%) was significantly higher under bed planting technique as compared to flat sowing method. The pooled seed yield was increased by 15.6 % in bed planted soybean crop as compared to flat planted crop. Soybean seeds primed with 100 ppm GA3 recorded significant results in all the growth parameters. Primed seed recorded increase in yield 15.3 % than non primed seeds. Seed rate of 62.5 kg ha-1 recorded significantly higher emergence count, plant height, dry matter accumulation, leaf area index and photosynthetic active radiation interception (%) which was statistically similar in results with 75 kg ha-1 seed rate in both the two years. Pooled seed yield of 62.5 kg ha-1seed rate was 4.61 % higher than 75 kg ha-1 and 12.6 % than 50 kg ha-1 seed rate.

Photosynthetic attributes and seed yield of sunflower (Helianthus annuus L.) as influenced by different levels and ratios of nitrogen and phosphorus fertilizers

2003 ◽  
Vol 51 (2) ◽  
pp. 149-155 ◽  
Author(s):  
N. Thavaprakash ◽  
G. Senthilkumar ◽  
S. D. Sivakumar ◽  
M. Raju
Keyword(s):  
Leaf Area ◽  
Seed Yield ◽  
Dry Matter ◽  
Block Design ◽  
Research Station ◽  
Dry Matter Accumulation ◽  
Nitrogen And Phosphorus ◽  
Area Index ◽  
Green Leaves ◽  
Photosynthetic Attributes

A field experiment was conducted at the Main Research Station, University of Agricultural Sciences, Dharwad, India, on medium black soils during the kharif (wet) season of 1999. The experiment was laid out in a randomized complete block design with varying N/P ratios (0.67 to 2.00) along with a control with a constant level of potassium (60 kg ha-1). The results revealed that the number of green leaves plant-1, the dry matter accumulation in the leaves, leaf area (dm2 plant-1) and leaf area index (LAI) increased up to the flowering stage (65 DAS) and thereafter declined. In the early stages (seedling and button stages) there was no significant variation with respect to the number of green leaves plant-1 among the treatments except in the control. Similarly, leaf area and LAI did not vary at the seedling stage. Treatments receiving N/P ratios of ?1.0 or 1.0 with higher doses of nitrogen (120 kg N ha-1) gave a significantly higher number of green leaves plant-1, leaf area and LAI as compared to N/P ratios of <1.0 and the control in later stages. The dry matter accumulation in the leaves (g plant-1) differed in all the stages, but higher values were recorded in these same treatments. Thus, due to the higher number of green leaves, higher LAI and greater dry matter accumulation in the leaves, the treatments with an N/P ratio of ?1.0 or 1.0 with 120 kg N ha-1 produced higher seed yields (3188 to 3554 kg ha-1) than other N/P ratios (2761 to 3009 kg ha-1). The highest yield (3554 kg ha-1) was recorded with an N/P ratio of 1.0 in the treatment receiving 120 kg N and 120 kg P2O5 ha-1. The correlation coefficients between these photosynthetic attributes and seed yield were also positive and significant.

Effects of the multiple leaflet gene on agronomical and physiological characters of mungbean (Vigna radiata)

1999 ◽  
Vol 133 (3) ◽  
pp. 321-324 ◽  
Author(s):  
S. KOWSURAT ◽  
P. SRINIVES ◽  
P. KASEMSAP ◽  
S. LAMSEEJAN
Keyword(s):  
Seed Yield ◽  
Vigna Radiata ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Near Isogenic Lines ◽  
Light Saturation ◽  
Area Index ◽  
Isogenic Lines ◽  
Agronomical Characters ◽  
Physiological Characters

Near-isogenic lines of mungbean (Vigna radiata) were produced from backcrossing two Thai recommended cultivars, KPS 1 and CN 36, with the multiple leaflet line, V 5926, until BC9. The isogenic lines were evaluated against the two recipients at Kasetsart University, Thailand, in the rainy season of 1996 and the dry season of 1997. The effect of the gene controlling the multiple leaflet on physiological and agronomical characters was investigated. Seed yield, plant height, and number of pods per plant were greater in the trifoliate leaflet cultivars than in the multiple leaflet near-isogenic lines, whereas the numbers of seeds per pod and 1000-seed weights were not significantly different. Light saturation and photosynthetic rate did not differ, while light interception and dry matter accumulation were greater in the trifoliate leaflet cultivars than in the multifoliate lines. The leaf area index (LAI) of the trifoliate parents was greater at the vegetative stage but lower at the flowering and young pod stages, due to the greater number of leaflets per plant of the multifoliate lines. After the beginning of the podding stage, the LAI of the multifoliate lines was less than that of the parents, as the number of leaflets per plant of these lines hardly changed while that of the trifoliate parents increased.

Nitrogen Demand of Cut Chrysanthemums in Relation to Shoot Height and Planting Date

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 523c-523
Author(s):  
Siegfried Zerche
Keyword(s):  
Dry Matter ◽  
Plant Density ◽  
Plant Biomass ◽  
N Uptake ◽  
Planting Date ◽  
Dry Matter Accumulation ◽  
Planting Dates ◽  
Shoot Height ◽  
Climate Conditions ◽  
Growing Period

Refined nutrient delivery systems are important for environmentally friendly production of cut flowers in both soil and hydroponic culture. They have to be closely orientated at the actual nutrient demand. To solve current problems, express analysis and nutrient uptake models have been developed in horticulture. However, the necessity of relatively laborious analysis or estimation of model input parameters have prevented their commercial use up to now. For this reason, we studied relationships between easily determinable parameters of plant biomass structure as shoot height, plant density and dry matter production as well as amount of nitrogen removal of hydroponically grown year-round cut chrysanthemums. In four experiments (planting dates 5.11.91; 25.3.92; 4.1.93; 1.7.93) with cultivar `Puma white' and a fixed plant density of 64 m2, shoots were harvested every 14 days from planting until flowering, with dry matter, internal N concentration and shoot height being measured. For each planting date, N uptake (y) was closely (r2 = 0.94; 0.93; 0.84; 0.93, respectively) related to shoot height (x) at the time of cutting and could be characterized by the equation y = a * × b. In the soilless cultivation system, dry matter concentrations of N remained constant over the whole growing period, indicating non-limiting nitrogen supply. In agreement with constant internal N concentrations, N uptake was linearly related (r2 = 0.94 to 0.99) to dry matter accumulation. It is concluded that shoot height is a useful parameter to include in a simple model of N uptake. However, in consideration of fluctuating greenhouse climate conditions needs more sophisticated approaches including processes such as water uptake and photosynthetically active radiation.

scholarly journals The nitrogen topdressing mode of indica-japonica and indica hybrid rice are different after side-deep fertilization with machine transplanting

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xiaodan Wang ◽  
Yaliang Wang ◽  
Yuping Zhang ◽  
Jing Xiang ◽  
Yikai Zhang ◽  
...  
Keyword(s):  
Single Dose ◽  
Controlled Release ◽  
Nitrogen Uptake ◽  
Dry Matter ◽  
Hybrid Rice ◽  
Dry Matter Accumulation ◽  
Area Index ◽  
Quick Release ◽  
Significant Difference ◽  
Spikelets Per Panicle

AbstractDetermination of the optimal fertilization method is crucial to maximize nitrogen use efficiency and yield of different rice cultivars. Side-deep fertilization with controlled-release nitrogen, in conjunction with machine transplanting and subsequent topdressing, was applied to Indica–japonica hybrid rice ‘Yongyou1540’ (YY1540) and indica hybrid rice ‘Tianyouhuazhan’ (TYHZ). Four nitrogen treatments were applied in 2018 and 2019: traditional nitrogen application with quick-release nitrogen (T1), single-dose deep fertilization at transplanting with 100% controlled-release nitrogen (T2), and deep fertilization of 70% controlled-release nitrogen and topdressing of 30% quick nitrogen at tillering (T3), or at panicle initiation (T4). Side-deep fertilization reduced the fertilizer application frequency without causing yield loss, T4 enhanced the yield of YY1540 by increasing the number of productive tillers and number of spikelets per panicle compared with T1, T2 and T3. The yield of TYHZ showed no significant difference among treatments. The T4 treatment decreased the number of tillers at the tilling peak stage and increased the percentage productive tillers and number of differentiated spikelets. Compared with the other treatments, T4 increased dry matter accumulation and leaf area index during panicle initiation and grain ripening, and contributed to enhanced nitrogen uptake and nitrogen utilization in YY1540. On average, nitrogen uptake and utilization in YY1540 were highest in T4, but no significant differences among treatments were observed in TYHZ. Dry matter accumulation and nitrogen uptake from panicle initiation to heading of YY1540 were correlated with number of spikelets per panicle, but no significant correlations were observed for TYHZ. Supplementary topdressing with quick-release nitrogen at the panicle initiation stage was required to increase yield of indica–japonica hybrid rice, whereas single-dose deep fertilization with controlled-release nitrogen is satisfactory for the indica hybrid cultivar.

scholarly journals Paclobutrazol Improves Sesame Yield by Increasing Dry Matter Accumulation and Reducing Seed Shattering Under Rainfed Conditions

2021 ◽  
Author(s):  
Muhammad Zeeshan Mehmood ◽  
Ghulam Qadir ◽  
Obaid Afzal ◽  
Atta Mohi Ud Din ◽  
Muhammad Ali Raza ◽  
...  
Keyword(s):  
Leaf Area ◽  
Seed Production ◽  
Seed Yield ◽  
Dry Matter ◽  
Biomass Accumulation ◽  
Total Biomass ◽  
Dry Matter Accumulation ◽  
Seed Shattering ◽  
Rainfed Conditions ◽  
Leaf Greenness

AbstractSeveral biotic and abiotic stresses significantly decrease the biomass accumulation and seed yield of sesame crops under rainfed areas. However, plant growth regulators (such as Paclobutrazol) can improve the total dry matter and seed production of the sesame crop. The effects of the paclobutrazol application on dry matter accumulation and seed yield had not been studied before in sesame under rainfed conditions. Therefore, a two-year field study during 2018 and 2019 was conducted with key objectives to assess the impacts of paclobutrazol on leaf greenness, leaf area, total dry matter production and partitioning, seed shattering, and seed yield of sesame. Two sesame cultivars (TS-5 and TS-3) were treated with four paclobutrazol concentrations (P0 = Control, P1 = 100 mg L−1, P2 = 200 mg L−1, P3 = 300 mg L−1). The experiment was executed in RCBD-factorial design with three replications. Compared with P0, treatment P3 improved the leaf greenness of sesame by 17%, 38%, and 60% at 45, 85, and 125 days after sowing, respectively. However, P3 treatment decreased the leaf area of sesame by 14% and 20% at 45 and 85 days after sowing than P0, respectively. Compared with P0, treatment P3 increased the leaf area by 46% at 125 days after sowing. On average, treatment P3 also improved the total biomass production by 21% and partitioning in roots, stems, leaves, capsules, and seeds by 23%, 19%, 23%, 22%, and 40%, respectively, in the whole growing seasons as compared to P0. Moreover, under P3 treatment, sesame attained the highest seed yield and lowest seed shattering by 27% and 30%, respectively, compared to P0. This study indicated that by applying the paclobutrazol concentration at the rate of 300 mg L−1 in sesame, the leaf greenness, leaf areas, biomass accumulation, partitioning, seed yield, and shatter resistance could be improved. Thus, the optimum paclobutrazol level could enhance the dry matter accumulation and seed production capacity of sesame by decreasing shattering losses under rainfed conditions.

scholarly journals Growth, yield and nutrient content of mungbean (Vigna radiata L.) in response to INM in eastern Uttar Pradesh, India

2018 ◽  
Vol 44 (3) ◽  
pp. 479-482 ◽  
Author(s):  
Yubaraj Dhakal ◽  
RS Meena ◽  
Nirmal De ◽  
SK Verma ◽  
Ajeet Singh
Keyword(s):  
Seed Yield ◽  
Harvest Index ◽  
Dry Matter ◽  
Uttar Pradesh ◽  
Growth Yield ◽  
Nutrient Content ◽  
Dry Matter Accumulation ◽  
Spad Value ◽  
Leaf Chlorophyll ◽  
Eastern Uttar Pradesh

Significant improvement in LAI, number of trifoliate, SPAD value of green leaf chlorophyll, dry matter accumulation, yield, harvest index (%) and nutrient content of mungbean were recorded due to application of 75% RDF + 2.5 t/ha vermicompost (VC) + Rhizobium (Rh)+ phosphorus solublizing bacteria (PSB), followed by 100% RDF + 2.5 t/ha VC and 100% RDF + Rh + PSB. The highest seed yield of mungbean was obtained with the application of 75% RDF + 2.5 t/ha VC + Rh + PSB (12.34 q /ha) followed by 100% RDF + 2.5 t/ha VC (12.05 q /ha) and 100% RDF + Rh+ PSB (11.95 q /ha).

scholarly journals Effect Of Planting Geometry On Growth Of Rice Varieties

2017 ◽  
Vol 5 (4) ◽  
pp. 423-429 ◽  
Author(s):  
Mohan Mahato ◽  
Bishnu Bilas Adhikari
Keyword(s):  
Growth Rate ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Rice Varieties ◽  
Area Index ◽  
Crop Growth Rate ◽  
Planting Geometry

A field experiment was conducted under humid subtropical agro-climatic condition of Nepal during rainy season of 2014. The experiment was laid out in to two factor Randomized Complete Block Design with  three replications consisting three drought tolerant rice varieties (Sukhadhan-4, Sukhadhan-5 and Radha-4) and four planting geometry (15 cm × 10 cm, 15 cm × 15 cm, 20 cm × 15 cm and 20 cm × 20 cm). The results revealed that the highest plant height and maximum leaf area index was recorded in planting geometry 15 cm × 10 cm in all growth stages. Whereas, planting geometry 20 cm × 15 cm produced the maximum number of tiller m-2 in all growth stage.  While planting geometry 20 cm × 15 cm and 20 cm × 20 cm produced statistically similar crop growth rate and dry matter accumulation in all stage of growth. Regarding the varieties, Sukhadhan- 4 showed highest plant height up to 75 DAT and plant height was statistically similar to Radha - 4 in 60 and 75 DAT. But maximum number of tiller m-2, leaf area index, crop growth rate and dry matter accumulation were recorded in Sukhadhan – 5 varieties. Int. J. Appl. Sci. Biotechnol. Vol 5(4): 423-429

Sign in / Sign up

Export Citation Format

Share Document