scholarly journals A Numerical Study of the Solar Cycle

1971 ◽  
Vol 43 ◽  
pp. 725-736
Author(s):  
Y. Nakagawa

Models relevant to numerical studies of the solar cycle are reviewed briefly with discussions of pertinent physical mechanisms. It is suggested that the observed surface activities are secondary in nature and an example of possible non-axisymmetric steady state solutions is given, together with the results of preliminary numerical computations.

1990 ◽  
Vol 216 ◽  
pp. 255-284 ◽  
Author(s):  
C. J. Lee ◽  
H. K. Cheng

Global interaction of the boundary layer separating from an obstacle with resulting open/closed wakes is studied for a thin airfoil in a steady flow. Replacing the Kutta condition of the classical theory is the breakaway criterion of the laminar triple-deck interaction (Sychev 1972; Smith 1977), which, together with the assumption of a uniform wake/eddy pressure, leads to a nonlinear equation system for the breakaway location and wake shape. The solutions depend on a Reynolds numberReand an airfoil thickness ratio or incidence τ and, in the domain$Re^{\frac{1}{16}}\tau = O(1)$considered, the separation locations are found to be far removed from the classical Brillouin–Villat point for the breakaway from a smooth shape. Bifurcations of the steady-state solution are found among examples of symmetrical and asymmetrical flows, allowing open and closed wakes, as well as symmetry breaking in an otherwise symmetrical flow. Accordingly, the influence of thickness and incidence, as well as Reynolds number is critical in the vicinity of branch points and cut-off points where steady-state solutions can/must change branches/types. The study suggests a correspondence of this bifurcation feature with the lift hysteresis and other aerodynamic anomalies observed from wind-tunnel and numerical studies in subcritical and high-subcriticalReflows.


1977 ◽  
Vol 99 (3) ◽  
pp. 526-530 ◽  
Author(s):  
B. S. Jagadish

Symmetric flows induced in rectangular cavities by a pair of moving walls are studied numerically. Solutions are obtained by solving the coupled transient vorticity transport and stream function relations using the alternating direction implicit method. Steady state solutions are obtained as limiting cases of the transients. The study covers Reynolds numbers of 1 100 and 1000 for cavities having aspect ratios of 0.5 and 1.0.


2013 ◽  
Vol 8 (S300) ◽  
pp. 330-334 ◽  
Author(s):  
Antoine Strugarek ◽  
Allan Sacha Brun ◽  
Sean P. Matt ◽  
Victor Reville

AbstractWe model the magnetized interaction between a star and a close-in planet (SPMIs), using global, magnetohydrodynamic numerical simulations. In this proceedings, we study the effects of the numerical boundary conditions at the stellar surface, where the stellar wind is driven, and in the planetary interior. We show that is it possible to design boundary conditions that are adequate to obtain physically realistic, steady-state solutions for cases with both magnetized and unmagnetized planets. This encourages further development of numerical studies, in order to better constrain and undersand SPMIs, as well as their effects on the star-planet rotational evolution.


Author(s):  
Bo Wang ◽  
Xiaolin Chen

Myocardial infarction (MI), commonly known as a heart attack, can cause restriction in blood supply and oxygen shortage. The current stem cell therapy aims to rebuild lost myocardial tissue including its vasculature after MI. However, it should be determined how many vessels myocardial fibers need and how these vessels should be distributed to deliver enough oxygen to maintain their normal function. Mathematical modeling is a good approach to systematically determine the number and distributions of vessels that are needed. In this study, we employ Boundary Element Method combined with Fast Multipole Algorithm to predict the level of hypoxia after MI. Morphology of cardiac tissue based on available morphometric images is used for simulation. Steady state solutions for oxygen level distribution in both normal and infarcted heart are achieved. The numerical studies show that the developed FMBEM can effectively handle the diffusion process in the real world.


Author(s):  
Praneetha Boppa ◽  
Gerald L. Morrison ◽  
Aarthi Sekaran

Squeeze film dampers (SFDs) are used in the high speed turbomachinery industry as a means to reduce vibration amplitude, provide damping, and improve dynamic stability of the rotor bearing system. Past numerical studies analyzing SFDs, have been computationally expensive and time consuming. The present study investigates the feasibility of applying a steady state solver to obtain computational efficiency while ensuring that the parameters of interest are captured. This is done via the application of the Moving Reference Frame (MRF) solver in ANSYS® Fluent. A steady state solver in an absolute frame of reference was used to produce whirling motion of the rotor. The results are validated by comparison to the experimental data of Delgado [1]. The numerical model shows good agreement with these results.


Author(s):  
A. K. Srivastava ◽  
R. Chouhan ◽  
A. Borgohain ◽  
S. S. Jana ◽  
N. K. Maheshwari ◽  
...  

Conceptual molten salt breeder reactor (MSBR) is under development in Bhabha Atomic Research Centre (BARC) with long-term objective of utilizing abundant thorium available in India. It is based on molten salts, which acts as fuel, blanket, and coolant for the reactor. LiF–ThF4 (77.6–22.4 mol %) is proposed as a blanket salt for Indian MSBR. A laboratory scale molten salt natural circulation loop (MSNCL) named molten active fluoride salt loop (MAFL) has been setup for thermal-hydraulic, material compatibility, and chemistry control studies. Steady-states and transient experiments have been performed in the operating temperature range of 600–750 °C. The loop operates in the power range of 250–550 W. Steady-state correlation given for natural circulation flow in a loop is compared with the steady-state experimental data. The Reynolds number was found to be in the range of 57–114. Computation fluid dynamics (CFD) simulation has also been performed for MAFL using openfoam code, and the results are compared with the experimental data generated in the loop. It has been found that predictions of openfoam are in good agreement with the experimental data. In this paper, features of the loop, its construction, and the experimental and numerical studies performed are discussed in detail.


Author(s):  
R. Ganesan ◽  
T. S. Sankar

Abstract Non-stationary oscillations of an asymmetric rotor while passing through primary resonance and the associated stability behaviour are analyzed. Solutions are developed based on a Jeffcott rotor model and the equations of motion are rewritten in a form suitable for applying the method of multiple scales. The many-variable version using “slow” and “fast” lime scales is applied to obtain the uniform expansions of amplitudes of motion. Similar general expressions for amplitude and frequency modulation functions are explicitly obtained and are specialized to yield steady-state solutions. Frequency-amplitude relationships resulting from combined parametric and mass unbalance excitations, for the nonlinear vibration are derived. Stability regions in the parameter space are obtained for a stable solution in terms of the perturbed steady-state solutions of the governing equations of motion. Also, trivial solutions are examined for stability. The sensitivity of vibration amplitudes to various rotor-dynamic system parameters is illustrated through a numerical study.


Sign in / Sign up

Export Citation Format

Share Document