scholarly journals The temporal evolution of a system in combustion theory

1983 ◽  
Vol 24 (4) ◽  
pp. 473-483 ◽  
Author(s):  
K. K. Tam
Keyword(s):  
Boundary Conditions ◽  
Laplace Transform ◽  
Parabolic Equations ◽  
Numerical Solutions ◽  
Temporal Evolution ◽  
Time Duration ◽  
Numerical Work ◽  
Infinite Slab ◽  
Over Time ◽  
Good Agreement

AbstractA model governing the combustion of a material is considered. The model consists of two non-linear coupled parabolic equations with initial and boundary conditions. An approximation for the rate of reactant consumption is made to enable the system to the treated by laplace transform. Three simple geometries are considered; namely, an infinite slab, an infinite circular and a sphere. The results obtained are then compared with numerical solutions for spme specific values of the parameters. There is good agreement over time duration for which numerical work was performed.

scholarly journals Coupling Disease-Progress-Curve and Time-of-Infection Functions for Predicting Yield Loss of Crops

2000 ◽  
Vol 90 (8) ◽  
pp. 788-800 ◽  
Author(s):  
L. V. Madden ◽  
G. Hughes ◽  
M. E. Irwin
Keyword(s):  
Yield Loss ◽  
Numerical Solutions ◽  
Disease Incidence ◽  
Time Interval ◽  
Short Time Interval ◽  
Time Duration ◽  
Plant Yield ◽  
Disease Progress ◽  
Time Of Infection ◽  
Over Time

A general approach was developed to predict the yield loss of crops in relation to infection by systemic diseases. The approach was based on two premises: (i) disease incidence in a population of plants over time can be described by a nonlinear disease progress model, such as the logistic or monomolecular; and (ii) yield of a plant is a function of time of infection (t) that can be represented by the (negative) exponential or similar model (ζ(t)). Yield loss of a population of plants on a proportional scale (L) can be written as the product of the proportion of the plant population newly infected during a very short time interval (X′(t)dt) and ζ(t), integrated over the time duration of the epidemic. L in the model can be expressed in relation to directly interpretable parameters: maximum per-plant yield loss (α, typically occurring at t = 0); the decline in per-plant loss as time of infection is delayed (γ; units of time-1); and the parameters that characterize disease progress over time, namely, initial disease incidence (X0), rate of disease increase (r; units of time-1), and maximum (or asymptotic) value of disease incidence (K). Based on the model formulation, L ranges from αX0 to αK and increases with increasing X0, r, K, α, and γ-1. The exact effects of these parameters on L were determined with numerical solutions of the model. The model was expanded to predict L when there was spatial heterogeneity in disease incidence among sites within a field and when maximum per-plant yield loss occurred at a time other than the beginning of the epidemic (t > 0). However, the latter two situations had a major impact on L only at high values of r. The modeling approach was demonstrated by analyzing data on soybean yield loss in relation to infection by Soybean mosaic virus, a member of the genus Potyvirus. Based on model solutions, strategies to reduce or minimize yield losses from a given disease can be evaluated.

scholarly journals The elastic stability of a thin twisted strip—II

1937 ◽  
Vol 161 (905) ◽  
pp. 197-220 ◽  
Keyword(s):  
Exact Solution ◽  
Approximate Solution ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Main Part ◽  
Fourier Expansion ◽  
Elastic Stability ◽  
Numerical Work ◽  
The Stability ◽  
Good Agreement

I—In a previous paper the present writer discussed both theoretically and experimentally the equilibrium and elastic stability of a thin twisted strip, and the results obtained by the theory were found to be in good agreement with observation. It has, however, been pointed out by Professor Southwell, F. R. S., that the solution of the stability equations which was given in that paper may only be regarded as an approximate solution for, although it satisfies exactly the differential equations and two boundary conditions along the edge of the strip, it only satisfies the two remaining boundary conditions approximately. The author has also noticed that the coefficients n a m in the Fourier expansion of θ 2 cos mθ which were used in A are incorrect when m = 0, and this has led to errors in the numerical work so that the values of ᴛb 2 / π 2 h which are given in Table I of A are wrong. In the present paper a solution of the stability equations is obtained which satisfies all the boundary conditions. This solution is very much more complicated than the approximate solution and much greater labour is required for the numerical work. The numerical work for the approximate solution of A has also been revised and the corrected results are given in 9, 10. It is found that the results for the approximate solution are in good agreement with those obtained from the exact solution and that both agree moderately well with the experimental results which are given in A. The main part of this paper is an extension of the previous work and is concerned with the stability of a thin twisted strip when it is subjected to a tension along its length. The theory has been compared with experiment and satisfactorily good agreement between them was found.

DYNAMICS OF THERMAL LOSSES BY CONVECTION AND RADIATION OF THE SPHERICAL HEAT ACCUMULATOR OF SOLAR PLANTS

2020 ◽  
Vol 4 (41) ◽  
pp. 57-62
Author(s):  
SHAVKAT KLYCHEV ◽  
◽  
BAKHRAMOV SAGDULLA ◽  
VALERIY KHARCHENKO ◽  
VLADIMIR PANCHENKO ◽  
...  
Keyword(s):  
Boundary Conditions ◽  
Heat Loss ◽  
Initial Conditions ◽  
Water System ◽  
Heat Losses ◽  
Research Purpose ◽  
Heat Accumulator ◽  
Water Heaters ◽  
Intrinsic Radiation ◽  
Over Time

There are needed energy (heat) accumulators to increase the efficiency of solar installations, including solar collectors (water heaters, air heaters, dryers). One of the tasks of designing heat accumulators is to ensure its minimal heat loss. The article considers the problem of determining the distribution of temperatures and heat losses by convection and radiation of the heat insulation-accumulating body (water) system for a ball heat accumulator under symmetric boundary conditions. The problem is solved numerically according to the program developed on the basis of the proposed «gap method». (Research purpose) The research purpose is in determining heat losses by convection and radiation of a two-layer ball heat accumulator with symmetric boundary conditions. (Materials and methods) Authors used the Fourier heat equation for spherical bodies. The article presents the determined boundary and initial conditions for bodies and their surfaces. (Results and discussion) The thickness of the insulation and the volume of the heat accumulator affect the dynamics and values of heat loss. The effect of increasing the thickness of the thermal insulation decreases with increasing its thickness, starting with a certain volume of the heat accumulator or with R > 0.3 meters, the heat losses change almost linearly over time. The dynamics of heat loss decreases with increasing shelf life, but the losses remain large. (Conclusions) Authors have developed a method and program for numerical calculation of heat loss and temperature over time in a spherical two-layer heat accumulator with symmetric boundary conditions, taking into account both falling and intrinsic radiation. The proposed method allows to unify the boundary conditions between contacting bodies.

Thermal Performance Analysis of a Rectangular Longitudinal Finned Solar Air Heater With Semicircular Absorber Plate

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Satyender Singh ◽  
Prashant Dhiman
Keyword(s):  
Thermal Performance ◽  
Numerical Solutions ◽  
Solar Air Heater ◽  
Duct Flow ◽  
Balance Equations ◽  
Absorber Plate ◽  
Ansys Fluent ◽  
Air Heater ◽  
Glass Cover ◽  
Good Agreement

Thermal performance of a single-pass single-glass cover solar air heater consisting of semicircular absorber plate finned with rectangular longitudinal fins is investigated. The analysis is carried out for different hydraulic diameters, which were obtained by varying the diameter of the duct from 0.3–0.5 m. One to five numbers of fins are considered. Reynolds number ranges from 1600–4300. Analytical solutions for energy balance equations of different elements and duct flow of the solar air heater are presented; results are compared with finite-volume methodology based numerical solutions obtained from ansys fluent commercial software, and a fairly good agreement is achieved. Moreover, analysis is extended to check the effect of double-glass cover and the recycle of the exiting air. Results revealed that the use of double-glass cover and recycle operation improves the thermal performance of solar air heater.

scholarly journals An inverse problem of radiative potentials and initial temperatures in parabolic equations with dynamic boundary conditions

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
El Mustapha Ait Ben Hassi ◽  
Salah-Eddine Chorfi ◽  
Lahcen Maniar
Keyword(s):  
Inverse Problem ◽  
Boundary Conditions ◽  
Parabolic Equations ◽  
Stability Result ◽  
Stability Estimate ◽  
Lipschitz Stability ◽  
Dynamic Boundary Conditions ◽  
Logarithmic Convexity ◽  
Dynamic Boundary ◽  
Logarithmic Stability

Abstract We study an inverse problem involving the restoration of two radiative potentials, not necessarily smooth, simultaneously with initial temperatures in parabolic equations with dynamic boundary conditions. We prove a Lipschitz stability estimate for the relevant potentials using a recent Carleman estimate, and a logarithmic stability result for the initial temperatures by a logarithmic convexity method, based on observations in an arbitrary subdomain.

scholarly journals Glimpse: A Gaze-Based Measure of Temporal Salience

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3099
Author(s):  
V. Javier Traver ◽  
Judith Zorío ◽  
Luis A. Leiva
Keyword(s):  
Visual Attention ◽  
Computational Models ◽  
Temporal Evolution ◽  
Temporal Consistency ◽  
Visual Salience ◽  
Temporal Dimension ◽  
Spatial Perspective ◽  
Spatio Temporal ◽  
Scoring Algorithms ◽  
Over Time

Temporal salience considers how visual attention varies over time. Although visual salience has been widely studied from a spatial perspective, its temporal dimension has been mostly ignored, despite arguably being of utmost importance to understand the temporal evolution of attention on dynamic contents. To address this gap, we proposed Glimpse, a novel measure to compute temporal salience based on the observer-spatio-temporal consistency of raw gaze data. The measure is conceptually simple, training free, and provides a semantically meaningful quantification of visual attention over time. As an extension, we explored scoring algorithms to estimate temporal salience from spatial salience maps predicted with existing computational models. However, these approaches generally fall short when compared with our proposed gaze-based measure. Glimpse could serve as the basis for several downstream tasks such as segmentation or summarization of videos. Glimpse’s software and data are publicly available.

scholarly journals Experimental and Numerical Buckling Analyses of Laminated Composite Plates under Temperature Effects

2010 ◽  
Vol 19 (4) ◽  
pp. 096369351001900 ◽  
Author(s):  
Emin Ergun
Keyword(s):  
Composite Plate ◽  
Numerical Solutions ◽  
Laminated Composite ◽  
Composite Plates ◽  
Buckling Load ◽  
Fibre Reinforcement ◽  
Stacking Sequence ◽  
Laminated Composite Plates ◽  
Different Temperatures ◽  
Good Agreement

The aim of this study is to investigate, experimentally and numerically, the change of critical buckling load in composite plates with different ply numbers, orientation angles, stacking sequences and boundary conditions as a function of temperature. Buckling specimens have been removed from the composite plate with glass-fibre reinforcement at [0°]i and [45°]i (i= number of ply). First, the mechanical properties of the composite material were determined at different temperatures, and after that, buckling experiments were done for those temperatures. Then, numerical solutions were obtained by modelling the specimens used in the experiment in the Ansys10 finite elements package software. The experimental and numerical results are in very good agreement with each other. It was found that the values of the buckling load at [0°] on the composite plates are higher than those of other angles. Besides, symmetrical and anti-symmetrical conditions were examined to see the effect of the stacking sequence on buckling and only numerical solutions were obtained. It is seen that the buckling load reaches the highest value when it is symmetrical in the cross-ply stacking sequence and it is anti-symmetrical in the angle-ply stacking sequence.

scholarly journals Verification of Convergence Rates of Numerical Solutions for Parabolic Equations

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Darae Jeong ◽  
Yibao Li ◽  
Chaeyoung Lee ◽  
Junxiang Yang ◽  
Yongho Choi ◽  
...  
Keyword(s):  
Parabolic Equations ◽  
Convergence Rates ◽  
Numerical Solutions ◽  
Second Order ◽  
Order Convergence ◽  
Numerical Convergence ◽  
Verification Method ◽  
First Order ◽  
Convergence Test ◽  
Second Order Convergence

In this paper, we propose a verification method for the convergence rates of the numerical solutions for parabolic equations. Specifically, we consider the numerical convergence rates of the heat equation, the Allen–Cahn equation, and the Cahn–Hilliard equation. Convergence test results show that if we refine the spatial and temporal steps at the same time, then we have the second-order convergence rate for the second-order scheme. However, in the case of the first-order in time and the second-order in space scheme, we may have the first-order or the second-order convergence rates depending on starting spatial and temporal step sizes. Therefore, for a rigorous numerical convergence test, we need to perform the spatial and the temporal convergence tests separately.

A Compact Model for Spherical Rough Contacts

2004 ◽  
Author(s):  
M. Bahrami ◽  
M. M. Yovanovich ◽  
J. R. Culham
Keyword(s):  
Pressure Distribution ◽  
Entire Range ◽  
Present Model ◽  
Numerical Solutions ◽  
Contact Radius ◽  
Bulk Deformation ◽  
Dimensional Parameters ◽  
Maximum Contact ◽  
Good Agreement ◽  
Key Parameter

The contact of rough spheres is of high interest in many tribological, thermal, and electrical fundamental analyses. Implementing the existing models is complex and requires iterative numerical solutions. In this paper a new model is presented and a general pressure distribution is proposed that encompasses the entire range of spherical rough contacts including the Hertzian limit. It is shown that the non-dimensional maximum contact pressure is the key parameter that controls the solution. Compact expressions are proposed for calculating the pressure distribution, radius of the contact area, elastic bulk deformation, and the compliance as functions of the governing non-dimensional parameters. The present model shows the same trends as those of the Greenwood and Tripp model. Correlations proposed for the contact radius and the compliance are compared with experimental data collected by others and good agreement is observed.

Sign in / Sign up

Export Citation Format

Share Document