Machine learning links seed composition, glucosinolates and viability of oilseed rape after 31 years of long-term storage

2018 ◽  
Vol 28 (4) ◽  
pp. 340-348 ◽  
Author(s):  
Manuela Nagel ◽  
Katharina Holstein ◽  
Evelin Willner ◽  
Andreas Börner
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Fatty Acids ◽  
Artificial Neural Networks ◽  
Fatty Acid Composition ◽  
Oilseed Rape ◽  
Multivariate Regression ◽  
Oil Content ◽  
Correlation Coefficients ◽  
Seed Composition

AbstractSeed longevity is influenced by many factors, a widely discussed one of which is the seed lipid content and fatty acid composition. Here, linear and non-linear regressions based on machine learning were applied to analyse germinability and seed composition of a set of 42 oilseed rape (Brassica napusL.) accessions grown under the same single environment and at the same time following a period of up to 31 years storage at 7°C. Mean viability was halved after 27.0 years of storage, but this figure concealed a major influence of genotype. There was also wide variation with respect to fatty acid composition, particularly with respect to oleic, α-linolenic, eicosenoic and erucic acid. Linear regression (rL) revealed significant correlation coefficients between normal seedling appearance and the content of α-linolenic acid (+0.52) and total oil (+0.59). Multivariate regression using artificial neural networks including a radial basis function (RBF), a multilayer perceptron (MLP) and a partial least square (PLS) recognized underlying structures and revealed high significant correlation coefficients (rM) for oil content (+0.87), eicosenoic acid (+0.75), stearic acid (+0.73) and lignoceric acid (+0.97). Oil content or a combination of oleic, α-linolenic, arachidic, eicosenoic and eicosadienoic acids and glucosinolates resulted in highest model fitting parametersR2of 0.90 and 0.88, respectively. In addition, the glucosinolate content, predominantly in the Brassicaceae family and ranging from 4.6 to 79.5 µM, was negatively correlated with viability (rL= ‒0.43). Summarizing, oil content, some fatty acids and glucosinolates contribute to variations in average half-life (15.2 to 50.7 years) of oilseed rape seeds. In contrast to linear regression, multivariate regression using artificial neural networks revealed high associations for combinations of parameters including underestimated minor fatty acids such as arachidic, stearic and eicosadienoic acids. This indicates that genetic and seed composition factors contribute to seed longevity. In addition, multivariate regressions might be a successful approach to predict seed viability based on fatty acids and seed oil content.

scholarly journals A Machine Learning Approach as a Surrogate for a Finite Element Analysis: Status of Research and Application to One Dimensional Systems

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1654
Author(s):  
Poojitha Vurtur Badarinath ◽  
Maria Chierichetti ◽  
Fatemeh Davoudi Kakhki
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Artificial Neural Networks ◽  
Stress Distribution ◽  
Maintenance Scheduling ◽  
Element Analysis ◽  
One Dimensional ◽  
Artificial Neural

Current maintenance intervals of mechanical systems are scheduled a priori based on the life of the system, resulting in expensive maintenance scheduling, and often undermining the safety of passengers. Going forward, the actual usage of a vehicle will be used to predict stresses in its structure, and therefore, to define a specific maintenance scheduling. Machine learning (ML) algorithms can be used to map a reduced set of data coming from real-time measurements of a structure into a detailed/high-fidelity finite element analysis (FEA) model of the same system. As a result, the FEA-based ML approach will directly estimate the stress distribution over the entire system during operations, thus improving the ability to define ad-hoc, safe, and efficient maintenance procedures. The paper initially presents a review of the current state-of-the-art of ML methods applied to finite elements. A surrogate finite element approach based on ML algorithms is also proposed to estimate the time-varying response of a one-dimensional beam. Several ML regression models, such as decision trees and artificial neural networks, have been developed, and their performance is compared for direct estimation of the stress distribution over a beam structure. The surrogate finite element models based on ML algorithms are able to estimate the response of the beam accurately, with artificial neural networks providing more accurate results.

Adaptive kinetic structural behavior through machine learning: Optimizing the process of kinematic transformation using artificial neural networks

2015 ◽  
Vol 29 (4) ◽  
pp. 371-391 ◽  
Author(s):  
Odysseas Kontovourkis ◽  
Marios C. Phocas ◽  
Ifigenia Lamprou
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Adaptive Behavior ◽  
Physical Environment ◽  
Transformation Process ◽  
Artificial Neural ◽  
Kinematic Transformation ◽  
Alternative Solutions ◽  
Digital Or

AbstractNowadays, on the basis of significant work carried out, architectural adaption structures are considered to be intelligent entities, able to react to various internal or external influences. Their adaptive behavior can be examined in a digital or physical environment, generating a variety of alternative solutions or structural transformations. These are controlled through different computational approaches, ranging from interactive exploration ones, producing alternative emergent results, to automate optimization ones, resulting in acceptable fitting solutions. This paper examines the adaptive behavior of a kinetic structure, aiming to explore suitable solutions resulting in final appropriate shapes during the transformation process. A machine learning methodology that implements an artificial neural networks algorithm is integrated to the suggested structure. The latter is formed by units articulated together in a sequential composition consisting of primary soft mechanisms and secondary rigid components that are responsible for its reconfiguration and stiffness. A number of case studies that respond to unstructured environments are set as examples, to test the effectiveness of the proposed methodology to be used for handling a large number of input data and to optimize the complex and nonlinear transformation behavior of the kinetic system at the global level, as a result of the units’ local activation that influences nearby units in a chaotic and unpredictable manner.

scholarly journals A Novel Method for Performance Measurement of Public Educational Institutions Using Machine Learning Models

2021 ◽  
Vol 11 (19) ◽  
pp. 9296
Author(s):  
Talha Mahboob Alam ◽  
Mubbashar Mushtaq ◽  
Kamran Shaukat ◽  
Ibrahim A. Hameed ◽  
Muhammad Umer Sarwar ◽  
...  
Keyword(s):  
Machine Learning ◽  
Neural Networks ◽  
Feature Selection ◽  
Artificial Neural Networks ◽  
Performance Indicators ◽  
Key Performance Indicators ◽  
Educational Institutions ◽  
Institutional Performance ◽  
Learning Models ◽  
Machine Learning Models

Lack of education is a major concern in underdeveloped countries because it leads to poor human and economic development. The level of education in public institutions varies across all regions around the globe. Current disparities in access to education worldwide are mostly due to systemic regional differences and the distribution of resources. Previous research focused on evaluating students’ academic performance, but less has been done to measure the performance of educational institutions. Key performance indicators for the evaluation of institutional performance differ from student performance indicators. There is a dire need to evaluate educational institutions’ performance based on their disparities and academic results on a large scale. This study proposes a model to measure institutional performance based on key performance indicators through data mining techniques. Various feature selection methods were used to extract the key performance indicators. Several machine learning models, namely, J48 decision tree, support vector machines, random forest, rotation forest, and artificial neural networks were employed to build an efficient model. The results of the study were based on different factors, i.e., the number of schools in a specific region, teachers, school locations, enrolment, and availability of necessary facilities that contribute to school performance. It was also observed that urban regions performed well compared to rural regions due to the improved availability of educational facilities and resources. The results showed that artificial neural networks outperformed other models and achieved an accuracy of 82.9% when the relief-F based feature selection method was used. This study will help support efforts in governance for performance monitoring, policy formulation, target-setting, evaluation, and reform to address the issues and challenges in education worldwide.

scholarly journals Cold-pressed cactus pear seed oil: Quality and stability

2021 ◽  
Vol 72 (3) ◽  
pp. e415 ◽  
Author(s):  
M. De Wit ◽  
V.K. Motsamai ◽  
A. Hugo
Keyword(s):  
Fatty Acids ◽  
Fatty Acid Composition ◽  
Fatty Acid ◽  
Physicochemical Properties ◽  
Acid Composition ◽  
Oil Content ◽  
Seed Oil ◽  
Oil Quality ◽  
Cactus Pear ◽  
Cold Pressed

Cold-pressed seed oil from twelve commercially produced cactus pear cultivars was assessed for oil yield, fatty acid composition, physicochemical properties, quality and stability. Large differences in oil content, fatty acid composition and physicochemical properties (IV, PV, RI, tocopherols, ORAC, % FFA, OSI and induction time) were observed. Oil content ranged between 2.51% and 5.96% (Meyers and American Giant). The important fatty acids detected were C16:0, C18:0, C18:1c9 and C18:2c9,12, with C18:2c9,12, the dominating fatty acid, ranging from 58.56-65.73%, followed by C18:1c9, ranging between 13.18-16.07%, C16:0, which ranged between 10.97 - 15.07% and C18:0, which ranged between 2.62-3.18%. Other fatty acids such as C14:0, C16:1c9, C17:0, C17:1c10, C20:0, C18:3c9,12,15 and C20:3c8,11,14 were detected in small amounts. The quality parameters of the oils were strongly influenced by oil content, fatty acid composition and physicochemical properties. Oil content, PV, % FFA, RI, IV, tocopherols, ORAC and ρ-anisidine value were negatively correlated with OSI. C18:0; C18:1c9; C18:2c9,12; MUFA; PUFA; n-6 and PUFA/SFA were also negatively correlated with OSI. Among all the cultivars, American Giant was identified as the paramount cultivar with good quality traits (oil content and oxidative stability).

scholarly journals Characterization of a Mobile Waste-Robot: a Heuristic Method to Path Planning using Artificial Neural Networks

2019 ◽  
Vol 8 (4) ◽  
pp. 3902-3910
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Path Planning ◽  
Mobile Robotics ◽  
Heuristic Method ◽  
Correlation Coefficients ◽  
Path Tracking ◽  
Ann Model ◽  
Artificial Neural ◽  
Tracking Time

In the field of mobile robotics, path planning is one of the most widely-sought areas of interest due to its nature of complexity, where such issue is also practically evident in the case of mobile robots used for waste disposal purposes. To overcome issues on path planning, researchers have studied various classical and heuristic methods, however, the extent of optimization applicability and accuracy still remain an opportunity for further improvements. This paper presents the exploration of Artificial Neural Networks (ANN) in characterizing the path planning capability of a mobile waste-robot in order to improve navigational accuracy and path tracking time. The author utilized proximity and sound sensors as input vectors, dual H-bridge Direct Current (DC) motors as target vectors, and trained the ANN model using Levenberg-Marquardt (LM) and Scaled Conjugate (SCG) algorithms. Results revealed that LM was significantly more accurate than SCG algorithm in local path planning with Mean Square Error (MSE) values of 1.75966, 2.67946, and 2.04963, and Regression (R) values of 0.995671, 0.991247, and 0.983187 in training, testing, and validation environments, respectively. Furthermore, based on simulation results, LM was also found to be more accurate and faster than SCG with Pearson R correlation coefficients of rx=.975, nx=6, px=0.001 and ry=.987, ny=6, py=0.000 and path tracking time of 8.47s.

Sign in / Sign up

Export Citation Format

Share Document