scholarly journals Vapochromic Properties of Diethenylpyrrole with Naphthyl Tethers Induced by Formation of a Distorted Structure in the Solid State

2020 ◽  
Vol 20 (3) ◽  
pp. 1383-1387 ◽  
Author(s):  
Soichi Yokoyama ◽  
Haruyasu Asahara ◽  
Nagatoshi Nishiwaki
Keyword(s):  
Solid State ◽  
Distorted Structure

Synthesis and properties of 5-aza-15-thiaporphyrins

2020 ◽  
Vol 24 (01n03) ◽  
pp. 84-89 ◽  
Author(s):  
Daisuke Yamashita ◽  
Hiroto Omori ◽  
Norihito Fukui ◽  
Hiroshi Shinokubo
Keyword(s):  
Solid State ◽  
Diffraction Analysis ◽  
Sulfur Atom ◽  
Good Yield ◽  
Sodium Sulfide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Distorted Structure

We have successfully prepared 5-aza-15-thiaporphyrin through nucleophilic sulfination of nitrogen-bridged dibromobisdipyrrin with sodium sulfide. X-ray diffraction analysis elucidated its structure in the solid state: two dipyrrin subunits were roughly coplanar around the sp2-hybridized meso-nitrogen. In contrast, they adopted a folded conformation around the meso-sulfur atom. Due to its relatively distorted structure, 5-aza-15-thiaporphyrin shows weak antiaromaticity in the magnetic criteria. The sulfur atom was oxidized with [Formula: see text]-chloroperbenzoic acid to provide 5-aza-15-thiaporphyrin [Formula: see text]-dioxide in good yield. While 5-aza-15-thiaporphyrin was non-emissive, its [Formula: see text]-dioxide exhibited fluorescence in solution.

Preparation of Thin Cadmium Telluride Samples for Electron Microscope Studies

1974 ◽  
Vol 32 ◽  
pp. 548-549
Author(s):  
T. J. Magee ◽  
J. Peng ◽  
J. Bean
Keyword(s):  
Electron Microscope ◽  
Sulfuric Acid ◽  
Solid State ◽  
Sample Preparation ◽  
Cadmium Telluride ◽  
Potassium Dichromate ◽  
Optical Components ◽  
The Past ◽  
Solid State Devices

Cadmium telluride has become increasingly important in a number of technological applications, particularly in the area of laser-optical components and solid state devices, Microstructural characterizations of the material have in the past been somewhat limited because of the lack of suitable sample preparation and thinning techniques. Utilizing a modified jet thinning apparatus and a potassium dichromate-sulfuric acid thinning solution, a procedure has now been developed for obtaining thin contamination-free samples for TEM examination.

The Collagenic Molecular Structural Unit of Solid State Complexes

1971 ◽  
Vol 29 ◽  
pp. 478-479
Author(s):  
Kenneth M. Richter ◽  
John A. Schilling
Keyword(s):  
Molecular Weight ◽  
Solid State ◽  
Structural Unit ◽  
X Ray Diffraction ◽  
X Ray ◽  
Naoh Treatment

The structural unit of solid state collagen complexes has been reported by Porter and Vanamee via EM and by Cowan, North and Randall via x-ray diffraction to be an ellipsoidal unit of 210-270 A. length by 50-100 A. diameter. It subsequently was independently demonstrated by us in dog tendon, dermis, and induced complexes. Its detailed morphologic, dimensional and molecular weight (MW) aspects have now been determined. It is pear-shaped in long profile with m diameters of 57 and 108 A. and m length of 263 A. (Fig. 1, tendon, KMnO4 fixation, Na-tungstate; Fig. 2a, schematic of unit in long, C, and x-sectional profiles of its thin, xB, and bulbous, xA portions; Fig. 2b, tendon essentially unmodified by ether and 0.4 N NaOH treatment, Na-tungstate). The unit consists of a uniquely coild cable, c, of ṁ 22.9 A. diameter and length of 2580-3316 A. The cable consists of three 2nd-strands, s, each of m 10.6 A.

Structure-property relations of liquid crystalline polymers

1987 ◽  
Vol 45 ◽  
pp. 460-463
Author(s):  
Linda C. Sawyer
Keyword(s):  
Solid State ◽  
Liquid Crystalline ◽  
Structural Model ◽  
Crystalline Polymer ◽  
Liquid Crystalline Polymers ◽  
Mechanical Anisotropy ◽  
Structure Property ◽  
Preparation Methods ◽  
Crystalline Polymers ◽  
Extended Chain

Recent liquid crystalline polymer (LCP) research has sought to define structure-property relationships of these complex new materials. The two major types of LCPs, thermotropic and lyotropic LCPs, both exhibit effects of process history on the microstructure frozen into the solid state. The high mechanical anisotropy of the molecules favors formation of complex structures. Microscopy has been used to develop an understanding of these microstructures and to describe them in a fundamental structural model. Preparation methods used include microtomy, etching, fracture and sonication for study by optical and electron microscopy techniques, which have been described for polymers. The model accounts for the macrostructures and microstructures observed in highly oriented fibers and films.Rod-like liquid crystalline polymers produce oriented materials because they have extended chain structures in the solid state. These polymers have found application as high modulus fibers and films with unique properties due to the formation of ordered solutions (lyotropic) or melts (thermotropic) which transform easily into highly oriented, extended chain structures in the solid state.

Microstructural Variations in Melt-Spun Rapidly Solidified Ribbons

1985 ◽  
Vol 43 ◽  
pp. 54-55
Author(s):  
L. A. Bendersky ◽  
W. J. Boettinger
Keyword(s):  
Solid State ◽  
Processing Parameters ◽  
Heat Extraction ◽  
Solid State Reactions ◽  
Careful Examination ◽  
Ion Milling ◽  
Melt Spun ◽  
Wheel Side ◽  
Rapidly Solidified ◽  
Heat Extraction Rate

Rapid solidification produces a wide variety of sub-micron scale microstructure. Generally, the microstructure depends on the imposed melt undercooling and heat extraction rate. The microstructure can vary strongly not only due to processing parameters changes but also during the process itself, as a result of recalescence. Hence, careful examination of different locations in rapidly solidified products should be performed. Additionally, post-solidification solid-state reactions can alter the microstructure.The objective of the present work is to demonstrate the strong microstructural changes in different regions of melt-spun ribbon for three different alloys. The locations of the analyzed structures were near the wheel side (W) and near the center (C) of the ribbons. The TEM specimens were prepared by selective electropolishing or ion milling.

Si(Li) detector for microanalysis cooled by thermoelectric device

1992 ◽  
Vol 50 (2) ◽  
pp. 1736-1737
Author(s):  
Shaul Barkan
Keyword(s):  
Solid State ◽  
Liquid Nitrogen ◽  
Thermoelectric Device ◽  
Peltier Cooler ◽  
Complicated Process ◽  
The Common

Cooling down solid state detecors, with other different way then liquid Nitrogen, is a goal of many vendors and customers since the invention of these detectors. THe disadvantage of the common way of liquid Nitrogen is first the inavailibility of the LN in many uses (like space military and any other applications that are not done inside a well organize Laboratory). The use of LN also considers as a Labor consumer in addition to the big dewar that has to be added to any detector for storing the LN, the boiling of the LN, may cause microphonics problesm and the refiling of the dewar in many Labs is a complicated process due to inconvenience location of the microscope.In this paper I will show a spectra result of 10mm2 SiLi detector for microanalysis use, cooled by peltier cooler. The peltier cooler has the advantage of non-microphonics and non-labor needed (like adding LN to the dewar).

Current Status of Solid-State X-Ray Systems

1985 ◽  
Vol 43 ◽  
pp. 158-161
Author(s):  
Martin Peckerar ◽  
Anastasios Tousimis
Keyword(s):  
Solid State ◽  
Electric Fields ◽  
Spectral Lines ◽  
Current Status ◽  
Mobile Charge ◽  
Electron Hole ◽  
X Ray ◽  
Sensing Systems ◽  
Transmission Electron ◽  
Electron Microscopes

Solid state x-ray sensing systems have been used for many years in conjunction with scanning and transmission electron microscopes. Such systems conveniently provide users with elemental area maps and quantitative chemical analyses of samples. Improvements on these tools are currently sought in the following areas: sensitivity at longer and shorter x-ray wavelengths and minimization of noise-broadening of spectral lines. In this paper, we review basic limitations and recent advances in each of these areas. Throughout the review, we emphasize the systems nature of the problem. That is. limitations exist not only in the sensor elements but also in the preamplifier/amplifier chain and in the interfaces between these components.Solid state x-ray sensors usually function by way of incident photons creating electron-hole pairs in semiconductor material. This radiation-produced mobile charge is swept into external circuitry by electric fields in the semiconductor bulk.

Transmission Electron Microscopy of an Aluminum-Silver-Stainless Steel Solid State Bond

1985 ◽  
Vol 43 ◽  
pp. 172-173
Author(s):  
M. J. Carr ◽  
J. F. Shewbridge ◽  
T. O. Wilford
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Solid State ◽  
Specimen Preparation ◽  
Dimensional Control ◽  
Tem Analysis ◽  
Metal Parts ◽  
Dissimilar Metal ◽  
Transmission Electron ◽  
Short Time

Strong solid state bonds are routinely produced between physical vapor deposited (PVD) silver coatings deposited on sputter cleaned surfaces of two dissimilar metal parts. The low temperature (200°C) and short time (10 min) used in the bonding cycle are advantageous from the standpoint of productivity and dimensional control. These conditions unfortunately produce no microstructural changes at or near the interface that are detectable by optical, SEM, or microprobe examination. Microstructural problems arising at these interfaces could therefore easily go undetected by these techniques. TEM analysis has not been previously applied to this problem because of the difficulty in specimen preparation. The purpose of this paper is to describe our technique for preparing specimens from solid state bonds and to present our initial observations of the microstructural details of such bonds.

Electron energy-loss near-edge structure in silicate minerals

1992 ◽  
Vol 50 (2) ◽  
pp. 1258-1259
Author(s):  
D W McComb ◽  
R S Payne ◽  
P L Hansen ◽  
R Brydson
Keyword(s):  
Solid State ◽  
Energy Loss ◽  
Electron Energy ◽  
State Energy ◽  
Local Environment ◽  
Edge Structure ◽  
Silicate Minerals ◽  
Two Samples ◽  
Electron Energy Loss ◽  
Careful Processing

Electron energy-loss near-edge structure (ELNES) is an effective probe of the local geometrical and electronic environment around particular atomic species in the solid state. Energy-loss spectra from several silicate minerals were mostly acquired using a VG HB501 STEM fitted with a parallel detector. Typically a collection angle of ≈8mrad was used, and an energy resolution of ≈0.5eV was achieved.Other authors have indicated that the ELNES of the Si L2,3-edge in α-quartz is dominated by the local environment of the silicon atom i.e. the SiO4 tetrahedron. On this basis, and from results on other minerals, the concept of a coordination fingerprint for certain atoms in minerals has been proposed. The concept is useful in some cases, illustrated here using results from a study of the Al2SiO5 polymorphs (Fig.l). The Al L2,3-edge of kyanite, which contains only 6-coordinate Al, is easily distinguished from andalusite (5- & 6-coordinate Al) and sillimanite (4- & 6-coordinate Al). At the Al K-edge even the latter two samples exhibit differences; with careful processing, the fingerprint for 4-, 5- and 6-coordinate aluminium may be obtained.

Sign in / Sign up

Export Citation Format

Share Document