Sub-1 nm Equivalent Oxide Thickness Al-HfO2 Trapping Layer with Excellent Thermal Stability and Retention for Nonvolatile Memory

2018 ◽  
Vol 1 (9) ◽  
pp. 4633-4641 ◽  
Author(s):  
Sabina Spiga ◽  
Francesco Driussi ◽  
Gabriele Congedo ◽  
Claudia Wiemer ◽  
Alessio Lamperti ◽  
...  
2006 ◽  
Vol 917 ◽  
Author(s):  
Johan Swerts ◽  
Wim Deweerd ◽  
Chang-gong Wang ◽  
Yanina Fedorenko ◽  
Annelies Delabie ◽  
...  

AbstractThe electrical performance of hafnium silicate (HfSiOx) gate stacks grown by atomic layer deposition (ALD) has been evaluated in capacitors and transistors. First, scaling potential of HfSiOx layers was studied as function of composition and thickness. It is shown that the equivalent oxide thickness scales down with decreasing layer thickness and increasing Hf-content. The gate leakage (at Vfb-1V), however, is mainly determined by the physical layer thickness. For the same equivalent oxide thickness (EOT) target, the lowest leakage is observed for the layers with the highest Hf-content. Leakage values as low as 1x10-3 A/cm2 for an equivalent oxide thickness of 1.3 nm have been obtained. Second, the thermal stability against crystallization of the ALD HfSiOx has been studied and related to their electrical properties. The thermal stability of HfSiOx decreases with increasing Hf-content that necessitates the use of nitridation. The influence of various annealing conditions on the nitrogen incorporation is also studied. Finally, the effect of HfSiOx composition and postdeposition nitridation is discussed on transistor level. TaN metal gate transistor data indicate that nitridation reduces the gate leakage and that Hf-rich HfSiOx layers show the best scaling potential, i.e., highest performance for the lowest gate leakage.


Author(s):  
Yih-Cheng Shih ◽  
E. L. Wilkie

Tungsten silicides (WSix) have been successfully used as the gate materials in self-aligned GaAs metal-semiconductor-field- effect transistors (MESFET). Thermal stability of the WSix/GaAs Schottky contact is of major concern since the n+ implanted source/drain regions must be annealed at high temperatures (∼ 800°C). WSi0.6 was considered the best composition to achieve good device performance due to its low stress and excellent thermal stability of the WSix/GaAs interface. The film adhesion and the uniformity in barrier heights and ideality factors of the WSi0.6 films have been improved by depositing a thin layer of pure W as the first layer on GaAs prior to WSi0.6 deposition. Recently WSi0.1 has been used successfully as the gate material in 1x10 μm GaAs FET's on the GaAs substrates which were sputter-cleaned prior to deposition. These GaAs FET's exhibited uniform threshold voltages across a 51 mm wafer with good film adhesion after annealing at 800°C for 10 min.


Author(s):  
Lu Wang ◽  
Shengdong Sun ◽  
Huajie Luo ◽  
Yang Ren ◽  
Hui Liu ◽  
...  

The realization of high piezoelectric performance and excellent temperature stability simultaneously in lead-free ceramics is the key for replacing Pb-containing perovskites in industry. In this study, large piezoelectric performance (d33...


RSC Advances ◽  
2020 ◽  
Vol 10 (19) ◽  
pp. 11219-11224
Author(s):  
Wei Zhang ◽  
Xiaoxiong Jia ◽  
Rui Wang ◽  
Huihui Liu ◽  
Zhengyu Xiao ◽  
...  

Thin films with perpendicular magnetic anisotropy (PMA) play an essential role in the development of technologies due to their excellent thermal stability and potential application in devices with high density, high stability, and low energy consumption.


2011 ◽  
Vol 55 (1) ◽  
pp. 64-67 ◽  
Author(s):  
W.B. Chen ◽  
C.H. Cheng ◽  
C.W. Lin ◽  
P.C. Chen ◽  
Albert Chin

RSC Advances ◽  
2016 ◽  
Vol 6 (23) ◽  
pp. 19417-19429 ◽  
Author(s):  
Kai Wang Chan ◽  
Cheng Zhu Liao ◽  
Hoi Man Wong ◽  
Kelvin Wai Kwok Yeung ◽  
Sie Chin Tjong

The WST-1 assay shows that the PEEK/15 vol% nHA–1.9 vol% CNF hybrid composite has excellent biocompatibility.


2021 ◽  
Author(s):  
Weiwei Wu ◽  
Yuanpeng Zhang ◽  
Yuepin Zhang ◽  
Jianxu Hu

A series of Eu3+ and Tb3+ singly doped Ba3YB3O9 phosphors were synthesized by a solution combustion approach. The most luminescent phosphors were selected as the starting materials to fabricate phosphor...


Author(s):  
Peiyao Zhao ◽  
Lingling Chen ◽  
Longtu Li ◽  
Xiaohui Wang

Dielectric capacitor has received growing interest for advanced electrical and electronic systems. However, the low energy density and poor thermal stability at high temperature severely hinder its practical applications. Herein,...


Sign in / Sign up

Export Citation Format

Share Document