Analysis of Structure/Property Relationships in Silkworm (Bombyx mori) and Spider Dragline (Nephila edulis) Silks Using Raman Spectroscopy

2003 ◽  
Vol 4 (2) ◽  
pp. 387-394 ◽  
Author(s):  
Jutarat Sirichaisit ◽  
Victoria L. Brookes ◽  
Robert J. Young ◽  
Fritz Vollrath
Keyword(s):  
Raman Spectroscopy ◽  
Bombyx Mori ◽  
Structure Property ◽  
Structure Property Relationships ◽  
Silkworm Bombyx Mori

On the nature of the phase transitions of aluminosilicate perrhenate sodalite

2020 ◽  
Vol 235 (6-7) ◽  
pp. 213-223
Author(s):  
Hilke Petersen ◽  
Lars Robben ◽  
Thorsten M. Gesing
Keyword(s):  
Raman Spectroscopy ◽  
Phase Transitions ◽  
Decomposition Temperature ◽  
Second Phase ◽  
Structure Property ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Two Phase ◽  
Structure Property Relationships ◽  
Heat Capacity Measurements

AbstractThe temperature-dependent structure-property relationships of the aluminosilicate perrhenate sodalite |Na8(ReO4)2|[AlSiO4]6 (ReO4-SOD) were analysed via powder X-ray diffraction (PXRD), Raman spectroscopy and heat capacity measurements. ReO4-SOD shows two phase transitions in the investigated temperature range (13 K < T < 1480 K). The first one at 218.6(1) K is correlated to the transition of dynamically ordered $P\overline{4}3n$ (> 218.6(1 K) to a statically disordered (<218.6(1) K) SOD template in $P\overline{4}3n$. The loss of the dynamics of the template anion during cooling causes an increase of disorder, indicated by an unusual intensity decrease of the 011-reflection and an increase of the Re-O2 bond length with decreasing temperature. Additionally, Raman spectroscopy shows a distortion of the ReO4 anion. Upon heating the thermal expansion of the sodalite cage originated in the tilt-mechanism causes the second phase transition at 442(1) K resulting in a symmetry-increase from $P\overline{4}3n$ to $Pm\overline{3}n$, the structure with the sodalites full framework expansion. Noteworthy is the high decomposition temperature of 1320(10) K.

Structure-property relationships of PE/PP sandwiched films

1987 ◽  
Vol 45 ◽  
pp. 454-455
Author(s):  
J. Petermann ◽  
G. Broza ◽  
U. Rieck ◽  
A. Jaballah ◽  
A. Kawaguchi
Keyword(s):  
Mechanical Tests ◽  
Polymer Materials ◽  
Ionic Crystals ◽  
Structure Property ◽  
Polymer Systems ◽  
Structure Property Relationships ◽  
Oriented Films ◽  
Materials Used ◽  
Polymer Laminates ◽  
Heated Glass

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

Approaches for TEM imaging of cavitation in toughened nylon

1989 ◽  
Vol 47 ◽  
pp. 352-353
Author(s):  
Barbara A. Wood
Keyword(s):  
Morphological Characteristics ◽  
Structure Property ◽  
Polymer Systems ◽  
Selective Staining ◽  
Structure Property Relationships ◽  
Rubber Toughened ◽  
Shear Yield ◽  
Controversial Topic ◽  
Selection Of ◽  
Diamond Knife

A controversial topic in the study of structure-property relationships of toughened polymer systems is the internal cavitation of toughener particles resulting from damage on impact or tensile deformation.Detailed observations of the influence of morphological characteristics such as particle size distribution on deformation mechanisms such as shear yield and cavitation could provide valuable guidance for selection of processing conditions, but TEM observation of damaged zones presents some experimental difficulties.Previously published TEM images of impact fractured toughened nylon show holes but contrast between matrix and toughener is lacking; other systems investigated have clearly shown cavitated impact modifier particles. In rubber toughened nylon, the physical characteristics of cavitated material differ from undamaged material to the extent that sectioning of heavily damaged regions by cryoultramicrotomy with a diamond knife results in sections of greater than optimum thickness (Figure 1). The detailed morphology is obscured despite selective staining of the rubber phase using the ruthenium trichloride route to ruthenium tetroxide.

Anti-diabetic effects of the silkworm (Bombyx mori.) extracts in the db/db mice

Planta Medica ◽  
2012 ◽  
Vol 78 (11) ◽  
Author(s):  
KS Ryu ◽  
HS Lee ◽  
KY Kim ◽  
MJ Kim ◽  
PD Kang ◽  
...  
Keyword(s):  
Bombyx Mori ◽  
Silkworm Bombyx Mori
Sign in / Sign up

Export Citation Format

Share Document