Adsorption and Kinetic Parameters for Synthesis of Methyl Nonanoate over Heterogeneous Catalysts

2012 ◽  
Vol 51 (44) ◽  
pp. 14367-14375 ◽  
Author(s):  
Mamta Sharma ◽  
Ravinder Kumar Wanchoo ◽  
Amrit Pal Toor
Keyword(s):  
Kinetic Parameters ◽  
Heterogeneous Catalysts ◽  
Methyl Nonanoate

What catalysis needs from the electron microscopist

1988 ◽  
Vol 46 ◽  
pp. 694-695
Author(s):  
Alexis T. Bell
Keyword(s):  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Catalyst Deactivation ◽  
Surface Composition ◽  
Internal Surface ◽  
Active Phase ◽  
Atomic Scale ◽  
Metal Catalyst ◽  
Internal Surface Area ◽  
Porous Support

Heterogeneous catalysts, used in industry for the production of fuels and chemicals, are microporous solids characterized by a high internal surface area. The catalyticly active sites may occur at the surface of the bulk solid or of small crystallites deposited on a porous support. An example of the former case would be a zeolite, and of the latter, a supported metal catalyst. Since the activity and selectivity of a catalyst are known to be a function of surface composition and structure, it is highly desirable to characterize catalyst surfaces with atomic scale resolution. Where the active phase is dispersed on a support, it is also important to know the dispersion of the deposited phase, as well as its structural and compositional uniformity, the latter characteristics being particularly important in the case of multicomponent catalysts. Knowledge of the pore size and shape is also important, since these can influence the transport of reactants and products through a catalyst and the dynamics of catalyst deactivation.

Electron holography of catalysts

1995 ◽  
Vol 53 ◽  
pp. 416-417
Author(s):  
A. K. Datye ◽  
D. S. Kalakkad ◽  
L. F. Allard ◽  
E. Völkl
Keyword(s):  
Heterogeneous Catalysts ◽  
High Surface ◽  
High Surface Area ◽  
Atomic Scale ◽  
Nano Particles ◽  
Phase Image ◽  
Electron Holography ◽  
Specimen Thickness ◽  
Phase Information ◽  
Particle Structure

The active phase in heterogeneous catalysts consists of nanometer-sized metal or oxide particles dispersed within the tortuous pore structure of a high surface area matrix. Such catalysts are extensively used for controlling emissions from automobile exhausts or in industrial processes such as the refining of crude oil to produce gasoline. The morphology of these nano-particles is of great interest to catalytic chemists since it affects the activity and selectivity for a class of reactions known as structure-sensitive reactions. In this paper, we describe some of the challenges in the study of heterogeneous catalysts, and provide examples of how electron holography can help in extracting details of particle structure and morphology on an atomic scale.Conventional high-resolution TEM imaging methods permit the image intensity to be recorded, but the phase information in the complex image wave is lost. However, it is the phase information which is sensitive at the atomic scale to changes in specimen thickness and composition, and thus analysis of the phase image can yield important information on morphological details at the nanometer level.

Quantitative nano-characterization of heterogeneous catalysts

1995 ◽  
Vol 53 ◽  
pp. 398-399
Author(s):  
P.A. Crozier ◽  
M. Pan
Keyword(s):  
Heterogeneous Catalysts ◽  
Low Dose ◽  
Imaging Techniques ◽  
Structural Features ◽  
Catalyst Characterization ◽  
New Developments ◽  
Double Phase ◽  
Phase Systems ◽  
Dose Imaging

Heterogeneous catalysts can be of varying complexity ranging from single or double phase systems to complicated mixtures of metals and oxides with additives to help promote chemical reactions, extend the life of the catalysts, prevent poisoning etc. Although catalysis occurs on the surface of most systems, detailed descriptions of the microstructure and chemistry of catalysts can be helpful for developing an understanding of the mechanism by which a catalyst facilitates a reaction. Recent years have seen continued development and improvement of various TEM, STEM and AEM techniques for yielding information on the structure and chemistry of catalysts on the nanometer scale. Here we review some quantitative approaches to catalyst characterization that have resulted from new developments in instrumentation.HREM has been used to examine structural features of catalysts often by employing profile imaging techniques to study atomic details on the surface. Digital recording techniques employing slow-scan CCD cameras have facilitated the use of low-dose imaging in zeolite structure analysis and electron crystallography. Fig. la shows a low-dose image from SSZ-33 zeolite revealing the presence of a stacking fault.

Kinetic parameters of nitrate uptake by different catch crop species: effects of low temperatures or previous nitrate starvation

1993 ◽  
Vol 88 (1) ◽  
pp. 85-92 ◽  
Author(s):  
P Laine ◽  
A. Ourry ◽  
J. Macduff ◽  
J. Boucaud ◽  
J. Salette
Keyword(s):  
Kinetic Parameters ◽  
Low Temperatures ◽  
Nitrate Uptake ◽  
Catch Crop ◽  
Crop Species ◽  
Species Effects ◽  
Nitrate Starvation

MEASUREMENT OF STEROID BINDING PROTEINS

1970 ◽  
Vol 65 (1_Suppl) ◽  
pp. S104-S121 ◽  
Author(s):  
E. E. Baulieu ◽  
J. P. Raynaud ◽  
E. Milgrom
Keyword(s):  
Kinetic Parameters ◽  
Binding Proteins ◽  
Binding Specificity ◽  
Binding Parameters ◽  
Target Organs ◽  
Biological Mixtures ◽  
Steroid Binding Proteins ◽  
Steroid Binding ◽  
Steroid Binding Protein

ABSTRACT A brief review of the characteristics of steroid binding proteins found in the plasma and in some target organs is presented, followed by some general remarks on binding »specificity« and binding parameters. Useful techniques for measuring binding parameters at equilibrium are reported, both those which keep the equilibrium intact and those which implicate its disruption. A concept is developed according to which the determination of a specific steroid binding protein is based on the »differential dissociation« of the several steroid binding complexes present in most biological mixtures. Methods which allow determination of the kinetic parameters of the binding systems are also presented. Various representations of the binding and therefore different modes of graphic representation and calculation are discussed, including the recent »proportion graph« method.

THE INFLUENCE OF ETHANOL ON THE CONVERSION OF PREGNENOLONE TO PROGESTERONE BY HUMAN PLACENTAL MICROSOMES

1974 ◽  
Vol 76 (1) ◽  
pp. 178-188 ◽  
Author(s):  
H. Lübbert ◽  
K. Pollow ◽  
R. Wagner ◽  
J. Hammerstein
Keyword(s):  
Kinetic Parameters ◽  
Enzyme Preparation ◽  
Ethanol Concentration ◽  
Hydroxysteroid Dehydrogenase ◽  
Product Formation ◽  
Linear Increase ◽  
Maximal Velocity ◽  
Microsomal Enzyme ◽  
Temperature Optima ◽  
Substrate Concentrations

ABSTRACT The effects of ethanol on kinetic parameters of placental Δ5-3β-hydroxysteroid dehydrogenase were studied. In the presence of high pregnenolone concentrations (50 μm, [S] > Km) the microsomal enzyme preparation exhibited an almost linear increase in activity as the ethanol concentration in the medium was raised from 2.5 to 15 % (v/v). At lower substrate concentrations ([S] << Km) ethanol caused inhibition. Other effects of ethanol were: linearity of product formation with time was prolonged; the maximal velocity was markedly increased; the Km for pregnenolone slightly decreased with increasing ethanol concentrations (2.5 to 10 %, v/v) whereas the Km for NAD remained the same. The pH and temperature optima of the reaction were unaffected by ethanol. Other organic solvents caused similar effects.

Catalysts for hydrogenation of CO2 into components of motor fuels

2020 ◽  
pp. 1-18
Author(s):  
Yu.V. Bilokopytov ◽  
◽  
S.L. Melnykova ◽  
N.Yu. Khimach ◽  
◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Heterogeneous Catalysts ◽  
Fossil Fuels ◽  
Catalyst Stability ◽  
Co2 Conversion ◽  
Active Components ◽  
Synthesis Conditions ◽  
Hydrogenation Of Co2 ◽  
Mesoporous Zeolites ◽  
Motor Fuels

CO2 is a harmful greenhouse gas, a product of chemical emissions, the combustion of fossil fuels and car exhausts, and it is a widely available source of carbon. The review considers various ways of hydrogenation of carbon dioxide into components of motor fuels - methanol, dimethyl ether, ethanol, hydrocarbons - in the presence of heterogeneous catalysts. At each route of conversion of CO2 (into oxygenates or hydrocarbons) the first stage is the formation of CO by the reverse water gas shift (rWGS) reaction, which must be taken into account when catalysts of process are choosing. The influence of chemical nature, specific surface area, particle size and interaction between catalyst components, as well as the method of its production on the CO2 conversion processes is analyzed. It is noted that the main active components of CO2 conversion into methanol are copper atoms and ions which interact with the oxide components of the catalyst. There is a positive effect of other metals oxides additives with strong basic centers on the surface on the activity of the traditional copper-zinc-aluminum oxide catalyst for the synthesis of methanol from the synthesis gas. The most active catalysts for the synthesis of DME from CO2 and H2 are bifunctional. These catalysts contain both a methanol synthesis catalyst and a dehydrating component, such as mesoporous zeolites with acid centers of weak and medium strength, evenly distributed on the surface. The synthesis of gasoline hydrocarbons (≥ C5) is carried out through the formation of CO or CH3OH and DME as intermediates on multifunctional catalysts, which also contain zeolites. Hydrogenation of CO2 into ethanol can be considered as an alternative to the synthesis of ethanol through the hydration of ethylene. High activation energy of carbon dioxide, harsh synthesis conditions as well as high selectivity for hydrocarbons, in particular methane remains the main problems. Further increase of selectivity and efficiency of carbon dioxide hydrogenation processes involves the use of nanocatalysts taking into account the mechanism of CO2 conversion reactions, development of methods for removing excess water as a by-product from the reaction zone and increasing catalyst stability over time.

Dissolution and Performing Homogeneous Photocatalysis of Polymeric Carbon Nitride

2018 ◽  
Author(s):  
Chaofeng Huang ◽  
Jing Wen ◽  
Yanfei Shen ◽  
Fei He ◽  
Li Mi ◽  
...  
Keyword(s):  
Conjugated Polymer ◽  
Carbon Nitride ◽  
Heterogeneous Catalysts ◽  
Methane Sulfonic Acid ◽  
Environment Friendly ◽  
The Poor ◽  
Catalytic Sites ◽  
Homogeneous Photocatalysis ◽  
Polymeric Carbon ◽  
First Time

<a></a><a>As a metal-free conjugated polymer, carbon nitride (CN) has attracted tremendous attention as heterogeneous (photo)catalysts. </a><a></a><a>By following prototype of enzymes, making all catalytic sites of accessible via homogeneous reactions is a promising approach toward maximizing CN activity, but hindered due to </a><a></a><a>the poor insolubility of CN</a>. Herein, we report the dissolution of CN in environment-friendly methane sulfonic acid and the homogeneous photocatalysis driven by CN for the first time with the activity boosted up to 10-times, comparing to the heterogeneous counterparts. Moreover, facile recycling and reusability, the <a>hallmark</a> of heterogeneous catalysts, were kept for the homogeneous CN photocatalyst via reversible precipitation using poor solvents. It opens new vista of CN in homogeneous catalysis and offers a successful example of polymeric catalysts in bridging gaps of homo/heterogeneous catalysis.

Sign in / Sign up

Export Citation Format

Share Document