scholarly journals The effect of copper chelating compounds on neurodegeneration

Author(s):  
Benjamin Hulbert ◽  
Emma Crnich ◽  
Daniel Kissel
1965 ◽  
Vol 13 (02) ◽  
pp. 477-483
Author(s):  
Alwin B. Bogert

SummaryExperiments were conducted to determine why different lots of Borate Buffer reagent affect the clot lysis times obtained in the fibrinolytic assay of Streptokinase. Minerals naturally occurring in distilled water were screened individually to determine their influence on lysis. Copper was found to have a very pronounced effect in this regard on the fibrinolytic system in that low levels reduce the lysis time and high levels increase it.


Author(s):  
Rizwan Ahmad Khan ◽  

This paper investigates the fresh and durability properties of the high-performance concrete by replacing cement with 15% Silica fume and simultaneously replacing fine aggregates with 25%, 50%, 75% and 100% copper slag at w/b ratio of 0.23. Five mixes were analysed and compared with the standard concrete mix. Fresh properties show an increase in the slump with the increase in the quantity of copper slag to the mix. Sorptivity, chloride penetration, UPV and carbonation results were very encouraging at 50% copper slag replacement levels. Microstructure analysis of these mixes shows the emergence of C-S-H gel for nearly all mixes indicating densification of the interfacial transition zone of the concrete.


Author(s):  
Oksana Bitlian ◽  
Oksana Kravchenko ◽  
Tetiana Kodak ◽  
Andrii Onyshchenko ◽  
Tetiana Konks

The analysis of literature sources shows that the type and material from which the packaging is made has an important place in the system of factors which influence on the storage of feed products and also prevents reducing the quality of raw materials and finished products. Therefore, the purpose of our research is the technological justification of changing the quality indexes of premix samples with salts of trace elements of different chemical nature in the process of storage. For the solution of the tasks, common zootechnical and statistical methods of the research were used. The use of premixes in feeding pigs is based on the fact that they should be used taking into account the biogeochemical properties of the region for which they are calculated. Foods depending on regional properties have a special biochemical composition and excess or lack of individual substances should be offset by the composition of premix. Ignoring this provision necessarily leads to the inappropriate use of BAR, the misbalance of the diet in relation to the physiological needs and inefficiency of the industry. In turn, it requires the purchase and conservation of products for the period of use. Various chemical structures and structures of BAR during the storage process react differently and change qualitative indexes, which leads to a decrease in the productive activity of active substances. It was determined that the humidity of premixes varied within the limits of 12.0-13.0 %, which exceeded the normative, but was not critical, the highest acidity had premix with sulfuric acid salts (6.9 units), the least - premix with lysates (5.7 unit). According to the results of the study, positive qualitative responses were found for the presence of vitamins A, D and B2, macro- and micronutrients: potassium, magnesium, copper, zinc, cobalt, iodine. The above facts of changes in the properties of premixes in the process of storage must be taken into account when providing technological bases for feeding pigs in order to obtain high gains and the quality of manufactured products. Key words: premix, micro-and macro elements, combined fodders, fodder mixes, chelating compounds, feeding, using, pigs' livestock.


2016 ◽  
Vol 44 (2) ◽  
pp. 156-166 ◽  
Author(s):  
Zeinab El-Bouhy ◽  
Rasha Reda ◽  
Asmaa El-Azony

2019 ◽  
pp. 111-123 ◽  
Author(s):  
P. P. Sharin ◽  
M. P. Akimova ◽  
V. I. Popov

The paper studies structure and phase characteristics of the interphase zone diamond/matrix in dressers made by thermal diffusion metallization of a diamond combined with matrix sintering based on WC–Co and Cu impregnation. The compact arrangement of chromium powder particles around diamond grains and the shielding effect of copper foil create favorable conditions for thermal diffusion metallization of diamond at matrix sintering. A metallized coating chemically bonded with diamond and consisting of chromium carbide and solid solution of cobalt in chromium phases provides a strong diamond retention in the carbide matrix. It was shown that it is formed on the surface of the diamond under the conditions specified in the experiment and the temperature – time sintering mode. The specific productivity of experimental dresser made by hybrid technology at straightening green silicon carbide grinding wheel equaled 51.50 cm3/mg exceeding that of the control dresser made without metallization of diamonds by sintering with copper impregnation by 44.66%.


Hypertension ◽  
1995 ◽  
Vol 26 (6) ◽  
pp. 863-868 ◽  
Author(s):  
Carlos E. García ◽  
Crescence M. Kilcoyne ◽  
Carmine Cardillo ◽  
Richard O. Cannon ◽  
Arshed A. Quyyumi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document