Change of quality indexes of premixes in the storage process

2020 ◽  
pp. 105-112
Author(s):  
Oksana Bitlian ◽  
Oksana Kravchenko ◽  
Tetiana Kodak ◽  
Andrii Onyshchenko ◽  
Tetiana Konks
Keyword(s):  
Raw Materials ◽  
Storage Process ◽  
Important Place ◽  
Inappropriate Use ◽  
Chemical Structures ◽  
Copper Zinc ◽  
Qualitative Responses ◽  
Chelating Compounds ◽  
Quality Indexes

The analysis of literature sources shows that the type and material from which the packaging is made has an important place in the system of factors which influence on the storage of feed products and also prevents reducing the quality of raw materials and finished products. Therefore, the purpose of our research is the technological justification of changing the quality indexes of premix samples with salts of trace elements of different chemical nature in the process of storage. For the solution of the tasks, common zootechnical and statistical methods of the research were used. The use of premixes in feeding pigs is based on the fact that they should be used taking into account the biogeochemical properties of the region for which they are calculated. Foods depending on regional properties have a special biochemical composition and excess or lack of individual substances should be offset by the composition of premix. Ignoring this provision necessarily leads to the inappropriate use of BAR, the misbalance of the diet in relation to the physiological needs and inefficiency of the industry. In turn, it requires the purchase and conservation of products for the period of use. Various chemical structures and structures of BAR during the storage process react differently and change qualitative indexes, which leads to a decrease in the productive activity of active substances. It was determined that the humidity of premixes varied within the limits of 12.0-13.0 %, which exceeded the normative, but was not critical, the highest acidity had premix with sulfuric acid salts (6.9 units), the least - premix with lysates (5.7 unit). According to the results of the study, positive qualitative responses were found for the presence of vitamins A, D and B2, macro- and micronutrients: potassium, magnesium, copper, zinc, cobalt, iodine. The above facts of changes in the properties of premixes in the process of storage must be taken into account when providing technological bases for feeding pigs in order to obtain high gains and the quality of manufactured products. Key words: premix, micro-and macro elements, combined fodders, fodder mixes, chelating compounds, feeding, using, pigs' livestock.

Study by Weibull Statistics of Ceramic Products from Rio Grande do Norte, Brazil

2012 ◽  
Vol 727-728 ◽  
pp. 1457-1461
Author(s):  
Elcio Correia de Souza Tavares ◽  
Claudia P.T. Cruz ◽  
Uilame Umbelino Gomes
Keyword(s):  
Mechanical Strength ◽  
Ceramic Industry ◽  
Raw Materials ◽  
Rio Grande ◽  
Linear Shrinkage ◽  
Strength Test ◽  
International Standards ◽  
Weibull Statistics ◽  
Inappropriate Use

The ceramic sector is important to the economy in Rio Grande do Norte, Brazil. Overall, however, the manufacturing process is imperfect; leading to inappropriate use of raw materials, waste of energy, environmental degradation, nonconformity to the Brazilian and international standards, etc. So, its crucial improves the produced bricks. This work aims to contribute to quality control of the ceramic industry, raising the values of physical properties of their products. The main parameters that influence these values were determined by Weibull statistics. Ceramics were studied by measuring porosity, water absorption, linear shrinkage, bulk density and mechanical strength. Mechanical strength test data resulted in Weibull distributions. The Weibull statistic parameter was calculated to best evaluations of ceramic quality. The results support our initial considerations about current stands of low quality of ceramic products from Rio Grande do Norte and underline the importance of testing and improving these products.

scholarly journals THE RESEARCH OF THE AMOUNT OF HEAVY METALS AND NITROSO COMPOUNDS IN CONCENTRATED TOMATO PRODUCTS

2016 ◽  
Vol 10 (4) ◽  
Author(s):  
V.V. Shutyuk
Keyword(s):  
Heavy Metals ◽  
Raw Materials ◽  
Heavy Metal Concentration ◽  
Nitroso Compounds ◽  
National University ◽  
Pharmaceutical Processing ◽  
Copper Zinc ◽  
Tomato Products ◽  
The Relationship

The constant selling race results in need for improving the quality of nutrition products among in-house food and pharmaceutical processing industries, which is an all-important key to success on the consumer market. This requires constant improvement of the product producing technologies. The topical problem of quality is the presence of heavy metals and nitroso compounds in the products. The research aimed at studying the changes in the heavy metal concentration levels (including Zn, Cu, Pb) in tomato products at their thickening has been conducted at the national University of Food Technologies. On the basis of the received results the relationship between the lead, copper, zinc, nitrosocompounds and the solid substances’ amount has been established. The conducted research allowed us to ascertain the fact that the amount of heavy metals and nitroso compounds in raw materials for the concentrated tomato products to be ofhigh quality must not exceed the values of 18…35 % of the limiting concentration.

Classroom Management

2016 ◽  
Vol 1 (1) ◽  
pp. 201
Author(s):  
Elida Kurti
Keyword(s):  
Classroom Management ◽  
General Education ◽  
Urban Areas ◽  
Teaching And Learning ◽  
Educational Institutions ◽  
Important Place ◽  
Rural And Urban Areas ◽  
Rural And Urban ◽  
Intellectual Level

This paper aims to reflect an effort to identify the problems associated with the educational learning process, as well as its function to express some inherent considerations to the most effective forms of the classroom management. Mentioned in this discussion are ways of management for various categories of students, not only from an intellectual level, but also by their behavior. Also, in the elaboration of this theme I was considering that in addition to other development directions of the country, an important place is occupied by the education of the younger generation in our school environments and especially in adopting the methods of teaching and learning management with a view to enable this generation to be competitive in the European labor market. This, of course, can be achieved by giving this generation the best values of behavior, cultural level, professional level and ethics one of an European family which we belong to, not just geographically. On such foundations, we have tried to develop this study, always improving the reality of the prolonged transition in the field of children’s education. Likewise, we have considered the factors that have left their mark on the structure, cultural level and general education level of children, such as high demographic turnover associated with migration from rural and urban areas, in the capacity of our educational institutions to cope with new situations etc. In the conclusions of this study is shown that there is required a substantial reform even in the pro-university educational system to ensure a significant improvement in the behavior of children, relations between them and the sound quality of their preparation. Used literature for this purpose has not been lacking, due to the fact that such problems are usually treated by different scholars. Likewise, we found it appropriate to use the ideas and issues discussed by the foreign literature that deals directly with classroom management problems. All the following treatise is intended to reflect the way of an effective classroom management.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

STRATEGI MENINGKATKAN LOYALITAS KONSUMEN MAKANAN KHAS KOTA CURUP KABUPATEN REJANG LEBONG

2019 ◽  
Author(s):  
Onsardi Onsardi
Keyword(s):  
Swot Analysis ◽  
Raw Materials ◽  
External Factors ◽  
Consumer Loyalty ◽  
Internal Factors ◽  
The Public ◽  
Typical Food ◽  
Internal And External Factors

The title of this study is the Strategy of Increasing Consumer Food Loyalty in CurupCity, Rejang Lebong Regency (Case Study in "Henvian" Typical Food Industry). Thisresearch is based on the importance of strategies in increasing business and consumerloyalty to products sold.Strategies to increase business and consumer loyalty can bedone with a SWOT analysis. Place of this research is the "Henvian" shop that sellstypical Rejang lebong food. The method used in this study is descriptive qualitative.Informants in this study were people who were considered to know for certain about theHENVIAN Specialty Food Store in Curup City, Rejang Lebong Regency. The dataanalysis technique used in this study is a SWOT analysis to determine the strengths,weaknesses, opportunities and threats in a typical Rejang Lebong food business.By using SWOT analysis techniques that consist of strengths (weakness), weaknesses(weakness), opportunities (opportnity) and threats (threath). The results of this studycan be concluded that the internal factors that are the strength of the marketing strategyare the quality of the product that is good at a price affordable to the public andtourists, service that is friendly and responsive to consumer needs, as well astechnological advancements that facilitate the promotion of business. Internal factorsthat are a weakness are often lack of stock, there are some products that do not meet thestandard packaging, the product shelf life is short, employees do not use uniforms.External factors that become opportunities are a fairly high economic community,abundant raw materials while external factors that are a threat are the manycompetitors, an unstable economy, the price of basic needs increases. Based on theresults of the SWOT analysis of internal and external factors, the strategy used is toimprove product quality by improving the appearance of packaging and quality ofcontent and quality of service by providing uniforms to employees and providingstandards of service to consumers. .Keywords: Strategy, Consumer Loyalty, SWOT

Оrganic Meat Production of Broiler Chickens Hubbard Redbro Cross

2020 ◽  
Keyword(s):  
Broiler Chickens ◽  
Raw Materials ◽  
Animal Health ◽  
Meat Products ◽  
Poultry Meat ◽  
Meat Production ◽  
Significant Difference ◽  
Environmentally Safe ◽  
The Impact

This article presents the results of studying the impact of housing and feeding conditions on broiler chickens of Hubbard RedBro cross, as well as the quality of products obtained when using floor and cage content, in a farm. It established that when receiving a mixed feed of own production using feed raw materials grown on a farm without the use of pesticides, a statistically significant decrease in potentially dangerous substances for animal health is recorded. Compared with factory feed, it has reduced the content of pesticides by 14 times, and mercury and arsenic by 24 times, cadmium by five times, and lead by ten times. The results of the study of economic indicators of growing Hubbard RedBro cross broiler chickens, as well as the chemical composition and quality of carcasses, indicated that there was no significant difference between the floor and cell conditions of keeping. Still, the use of a diet based on eco-feeds contributed to a statistically significant decrease in the concentration of toxic metals in the muscles of the poultry of the experimental groups. As a result, it found that the use of the studied compound feed in the diets of broiler chickens increased the indicators of Biosafety and ensured the production of environmentally safe ("organic") poultry meat products.

Impact of Raw Materials and Processing Techniques on The Microbiological Quality of Egyptian Domiati Cheese

2020 ◽  
Keyword(s):  
Raw Materials ◽  
Microbiological Quality ◽  
Raw Milk ◽  
Plate Count ◽  
E Coli ◽  
Fresh Cheese ◽  
Processing Techniques ◽  
The Impact ◽  
Total Yeast

Domiati cheese is the most popular brand of cheese ripened in brine in the Middle East in terms of consumed quantities. This study was performed to investigate the impact of the microbiological quality of the used raw materials, the applied traditional processing techniques and ripening period on the quality and safety of the produced cheese. Three hundred random composite samples were collected from three factories at Fayoum Governorate, Egypt. Collected samples represent twenty-five each of: raw milk, table salt, calf rennet, microbial rennet, water, environmental air, whey, fresh cheese, ripened cheese & swabs from: worker hands; cheese molds and utensils; tanks. All samples were examined microbiologically for Standard Plate Count (SPC), coliforms count, Staphylococcus aureus (S. aureus) count, total yeast & mould count, presence of E. coli, Salmonellae and Listeria monocytogenes (L. monocytogenes). The mean value of SPC, coliforms, S. aureus and total yeast & mould counts ranged from (79×102 CFU/m3 for air to 13×108 CFU/g for fresh cheese), (7×102 MPN/ cm2 for tank swabs to 80×106 MPN/ml for raw milk), (9×102 CFU/g for salt to 69×106 CFU/g for fresh cheese) and (2×102 CFU/cm2 for hand swabs to 60×104 CFU/g for fresh cheese), respectively. Whereas, E. coli, Salmonella and L. monocytogenes failed to be detected in all examined samples. There were significant differences in all determined microbiological parameters (p ≤0.05) between fresh and ripened cheese which may be attributed to different adverse conditions such as water activity, pH, salt content and temperature carried out to improve the quality of the product.

Chitosan in Biomedical Engineering: A Critical Review

2019 ◽  
Vol 14 (2) ◽  
pp. 93-116 ◽  
Author(s):  
Shabnam Mohebbi ◽  
Mojtaba Nasiri Nezhad ◽  
Payam Zarrintaj ◽  
Seyed Hassan Jafari ◽  
Saman Seyed Gholizadeh ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Biomedical Engineering ◽  
Biological Properties ◽  
Advanced Materials ◽  
Comprehensive Overview ◽  
Chemical Structures ◽  
Bio Imaging ◽  
Significant Attention ◽  
Unique Chemical

Biomedical engineering seeks to enhance the quality of life by developing advanced materials and technologies. Chitosan-based biomaterials have attracted significant attention because of having unique chemical structures with desired biocompatibility and biodegradability, which play different roles in membranes, sponges and scaffolds, along with promising biological properties such as biocompatibility, biodegradability and non-toxicity. Therefore, chitosan derivatives have been widely used in a vast variety of uses, chiefly pharmaceuticals and biomedical engineering. It is attempted here to draw a comprehensive overview of chitosan emerging applications in medicine, tissue engineering, drug delivery, gene therapy, cancer therapy, ophthalmology, dentistry, bio-imaging, bio-sensing and diagnosis. The use of Stem Cells (SCs) has given an interesting feature to the use of chitosan so that regenerative medicine and therapeutic methods have benefited from chitosan-based platforms. Plenty of the most recent discussions with stimulating ideas in this field are covered that could hopefully serve as hints for more developed works in biomedical engineering.

Phamacognostical and Pharmaceutical Evaluation of Chandrashakaladi Vataka - A herbal formulation

2016 ◽  
Vol 1 (3) ◽  
Author(s):  
Dr. Akash S Changole ◽  
Mandip Goyal ◽  
Harish CR
Keyword(s):  
Classical Method ◽  
Raw Materials ◽  
Herbal Medicines ◽  
Vital Role ◽  
Published Data ◽  
Herbal Formulation ◽  
Physico Chemical ◽  
Good Manufacturing Practices ◽  
Solvent Systems

Background: Quality control and the standardization of herbal medicines involve steps like standard source and quality of raw materials, good manufacturing practices and adequate analytical screening. These practices play a vital role in guaranting the quality and stability of herbal preparations. Chandrashakaladi Vataka is an Ayurvedic herbal formulation mentioned to be beneficial in Kushtha. Till date no published data is available on its analytical profile. Aim: To develop the Pharmacognostical and Phyto-chemical profile of Chandrashakaladi Vataka. Material and Methods: Chandrashakaladi Vataka was prepared as per classical method and analytical findings were recorded. Samples were subjected to organoleptic analysis, physico-chemical analysis and HPTLC examination by optimizing the solvent systems. Results and Conclusions: Pharmacognostical profile of Chandrashakaladi Vataka was established. Loss on drying, Ash value, Acid insoluble extract, Methanol soluble extract, Chandrashakaladi Vataka was found within prescribed limits. HPTLC profile of Chandrashakaladi Vataka revealed 12 spots at 254 nm and 13 spots at 366 nm.

Sign in / Sign up

Export Citation Format

Share Document