scholarly journals High-density Néel-type magnetic skyrmion phase stabilized at high temperature

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Hee Young Kwon ◽  
Kyung Mee Song ◽  
Juyoung Jeong ◽  
Ah-Yeon Lee ◽  
Seung-Young Park ◽  
...  
Keyword(s):  
High Temperature ◽  
High Density ◽  
Low Density ◽  
Memory Devices ◽  
Magnetic Multilayer ◽  
Multilayer Systems ◽  
Micromagnetic Simulations ◽  
Transmission Electron ◽  
Ultrahigh Density ◽  
Lorentz Transmission Electron Microscopy

AbstractThe discovery of a thermally stable, high-density magnetic skyrmion phase is a key prerequisite for realizing practical skyrmionic memory devices. In contrast to the typical low-density Néel-type skyrmions observed in technologically viable multilayer systems, with Lorentz transmission electron microscopy, we report the discovery of a high-density homochiral Néel-type skyrmion phase in magnetic multilayer structures that is stable at high temperatures up to 733 K (≈460 °C). Micromagnetic simulations reveal that a high-density skyrmion phase can be stabilized at high temperature by deliberately tuning the magnetic anisotropy, magnetic field, and temperature. The existence of the high-density skyrmion phase in a magnetic multilayer system raises the possibility of incorporating chiral Néel-type skyrmions in ultrahigh-density spin memory devices. Moreover, the existence of this phase at high temperature shows its thermal stability, demonstrating the potential for skyrmion devices operating in thermally challenging modern electronic chips.

scholarly journals Intrinsic stability of magnetic anti-skyrmions in the tetragonal inverse Heusler compound Mn1.4Pt0.9Pd0.1Sn

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Rana Saha ◽  
Abhay K. Srivastava ◽  
Tianping Ma ◽  
Jagannath Jena ◽  
Peter Werner ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Current Interest ◽  
Heusler Compound ◽  
Micromagnetic Simulations ◽  
Intrinsic Stability ◽  
Transmission Electron ◽  
Wide Range ◽  
Topological Characteristics ◽  
Lorentz Transmission Electron Microscopy

AbstractMagnetic anti-skyrmions are one of several chiral spin textures that are of great current interest both for their topological characteristics and potential spintronic applications. Anti-skyrmions were recently observed in the inverse tetragonal Heusler material Mn1.4Pt0.9Pd0.1Sn. Here we show, using Lorentz transmission electron microscopy, that anti-skyrmions are found over a wide range of temperature and magnetic fields in wedged lamellae formed from single crystals of Mn1.4Pt0.9Pd0.1Sn for thicknesses ranging up to ~250 nm. The temperature-field stability window of the anti-skyrmions varies little with thickness. Using micromagnetic simulations we show that this intrinsic stability of anti-skyrmions can be accounted for by the symmetry of the crystal lattice which is imposed on that of the Dzyaloshinskii-Moriya exchange interaction. These distinctive behaviors of anti-skyrmions makes them particularly attractive for spintronic applications.

scholarly journals Dipolar-stabilized first and second-order antiskyrmions in ferrimagnetic multilayers

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Michael Heigl ◽  
Sabri Koraltan ◽  
Marek Vaňatka ◽  
Robert Kraft ◽  
Claas Abert ◽  
...  
Keyword(s):  
Dipole Interaction ◽  
Dipolar Interaction ◽  
Second Order ◽  
Microscopy Imaging ◽  
Micromagnetic Simulations ◽  
Spintronic Devices ◽  
Transmission Electron ◽  
Wide Range ◽  
Lorentz Transmission Electron Microscopy

AbstractSkyrmions and antiskyrmions are topologically protected spin structures with opposite vorticities. Particularly in coexisting phases, these two types of magnetic quasi-particles may show fascinating physics and potential for spintronic devices. While skyrmions are observed in a wide range of materials, until now antiskyrmions were exclusive to materials with D2d symmetry. In this work, we show first and second-order antiskyrmions stabilized by magnetic dipole–dipole interaction in Fe/Gd-based multilayers. We modify the magnetic properties of the multilayers by Ir insertion layers. Using Lorentz transmission electron microscopy imaging, we observe coexisting antiskyrmions, Bloch skyrmions, and type-2 bubbles and determine the range of material properties and magnetic fields where the different spin objects form and dissipate. We perform micromagnetic simulations to obtain more insight into the studied system and conclude that the reduction of saturation magnetization and uniaxial magnetic anisotropy leads to the existence of this zoo of different spin objects and that they are primarily stabilized by dipolar interaction.

Soft x-ray emission of galliumlike rare-earth atoms produced by high-temperature low-density tokamak and high-density laser plasmas

1994 ◽  
Vol 50 (3) ◽  
pp. 2248-2256 ◽  
Author(s):  
K. B. Fournier ◽  
W. H. Goldstein ◽  
A. Osterheld ◽  
M. Finkenthal ◽  
S. Lippmann ◽  
...  
Keyword(s):  
Rare Earth ◽  
High Temperature ◽  
High Density ◽  
Low Density ◽  
X Ray ◽  
Laser Plasmas

scholarly journals Observation of domain wall bimerons in chiral magnets

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Tomoki Nagase ◽  
Yeong-Gi So ◽  
Hayata Yasui ◽  
Takafumi Ishida ◽  
Hiroyuki K. Yoshida ◽  
...  
Keyword(s):  
Domain Wall ◽  
Magnetic Anisotropy ◽  
Domain Walls ◽  
Topological Defects ◽  
Dipolar Interaction ◽  
Micromagnetic Simulations ◽  
Localized State ◽  
Transmission Electron ◽  
Wide Range ◽  
Lorentz Transmission Electron Microscopy

AbstractTopological defects embedded in or combined with domain walls have been proposed in various systems, some of which are referred to as domain wall skyrmions or domain wall bimerons. However, the experimental observation of such topological defects remains an ongoing challenge. Here, using Lorentz transmission electron microscopy, we report the experimental discovery of domain wall bimerons in chiral magnet Co-Zn-Mn(110) thin films. By applying a magnetic field, multidomain structures develop, and simultaneously, chained or isolated bimerons arise as the localized state between the domains with the opposite in-plane components of net magnetization. The multidomain formation is attributed to magnetic anisotropy and dipolar interaction, and domain wall bimerons are stabilized by the Dzyaloshinskii-Moriya interaction. In addition, micromagnetic simulations show that domain wall bimerons appear for a wide range of conditions in chiral magnets with cubic magnetic anisotropy. Our results promote further study in various fields of physics.

Precipitation of NiHfsi phase in NiAl single crystals containing Hf

1995 ◽  
Vol 53 ◽  
pp. 532-533
Author(s):  
A. Garg ◽  
R. D. Noebe ◽  
R. Darolia
Keyword(s):  
High Temperature ◽  
Single Crystals ◽  
High Temperature Strength ◽  
Bridgman Technique ◽  
Shell Mold ◽  
Third Phase ◽  
Unknown Phase ◽  
Transmission Electron ◽  
Two Phases ◽  
Nial Matrix

Small additions of Hf to NiAl produce a significant increase in the high-temperature strength of single crystals. Hf has a very limited solubility in NiAl and in the presence of Si, results in a high density of G-phase (Ni16Hf6Si7) cuboidal precipitates and some G-platelets in a NiAl matrix. These precipitates have a F.C.C structure and nucleate on {100}NiAl planes with almost perfect coherency and a cube-on-cube orientation-relationship (O.R.). However, G-phase is metastable and after prolonged aging at high temperature dissolves at the expense of a more stable Heusler (β'-Ni2AlHf) phase. In addition to these two phases, a third phase was shown to be present in a NiAl-0.3at. % Hf alloy, but was not previously identified (Fig. 4 of ref. 2 ). In this work, we report the morphology, crystal-structure, O.R., and stability of this unknown phase, which were determined using conventional and analytical transmission electron microscopy (TEM).Single crystals of NiAl containing 0.5at. % Hf were grown by a Bridgman technique. Chemical analysis indicated that these crystals also contained Si, which was not an intentional alloying addition but was picked up from the shell mold during directional solidification.

Quantitative defect studies in semiconductor TEM samples prepared by low angle ion milling

1995 ◽  
Vol 53 ◽  
pp. 512-513
Author(s):  
L. Mulestagno ◽  
J.C. Holzer ◽  
P. Fraundorf
Keyword(s):  
Sample Preparation ◽  
Milling Time ◽  
High Density ◽  
Low Density ◽  
Ion Milling ◽  
High Quality ◽  
Variable Angle ◽  
Major Disadvantage ◽  
Induced Defects

Due to the wealth of information, both analytical and structural that can be obtained from it TEM always has been a favorite tool for the analysis of process-induced defects in semiconductor wafers. The only major disadvantage has always been, that the volume under study in the TEM is relatively small, making it difficult to locate low density defects, and sample preparation is a somewhat lengthy procedure. This problem has been somewhat alleviated by the availability of efficient low angle milling.Using a PIPS® variable angle ion -mill, manufactured by Gatan, we have been consistently obtaining planar specimens with a high quality thin area in excess of 5 × 104 μm2 in about half an hour (milling time), which has made it possible to locate defects at lower densities, or, for defects of relatively high density, obtain information which is statistically more significant (table 1).

Microstructural Study of Diamond Deformed Under High Pressure and Temperature

1985 ◽  
Vol 43 ◽  
pp. 230-231
Author(s):  
E. F. Koch
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Lattice Structure ◽  
Diamond Particle ◽  
Polycrystalline Diamond ◽  
Sintering Process ◽  
Ion Milling ◽  
Sintered Compact ◽  
Transmission Electron ◽  
High Pressure Sintering

Because of the extremely rigid lattice structure of diamond, generating new dislocations or moving existing dislocations in diamond by applying mechanical stress at ambient temperature is very difficult. Analysis of portions of diamonds deformed under bending stress at elevated temperature has shown that diamond deforms plastically under suitable conditions and that its primary slip systems are on the ﹛111﹜ planes. Plastic deformation in diamond is more commonly observed during the high temperature - high pressure sintering process used to make diamond compacts. The pressure and temperature conditions in the sintering presses are sufficiently high that many diamond grains in the sintered compact show deformed microtructures.In this report commercially available polycrystalline diamond discs for rock cutting applications were analyzed to study the deformation substructures in the diamond grains using transmission electron microscopy. An individual diamond particle can be plastically deformed in a high pressure apparatus at high temperature, but it is nearly impossible to prepare such a particle for TEM observation, since any medium in which the diamond is mounted wears away faster than the diamond during ion milling and the diamond is lost.

TEM Study of Co/Pd and Co/Au Multilayers

1993 ◽  
Vol 51 ◽  
pp. 1036-1037
Author(s):  
A.E.M. De Veirman ◽  
F.J.G. Hakkens ◽  
W.M.J. Coene ◽  
F.J.A. den Broeder
Keyword(s):  
Magnetic Anisotropy ◽  
Ion Beam ◽  
Perpendicular Magnetic Anisotropy ◽  
Optical Recording ◽  
Magnetic Multilayer ◽  
Ion Beam Sputtering ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Beam Sputtering ◽  
Substrate Temperatures

There is currently great interest in magnetic multilayer (ML) thin films (see e.g.), because they display some interesting magnetic properties. Co/Pd and Co/Au ML systems exhibit perpendicular magnetic anisotropy below certain Co layer thicknesses, which makes them candidates for applications in the field of magneto-optical recording. It has been found that the magnetic anisotropy of a particular system strongly depends on the preparation method (vapour deposition, sputtering, ion beam sputtering) as well as on the substrate, underlayer and deposition temperature. In order to get a better understanding of the correlation between microstructure and properties a thorough cross-sectional transmission electron microscopy (XTEM) study of vapour deposited Co/Pd and Co/Au (111) MLs was undertaken (for more detailed results see ref.).The Co/Pd films (with fixed Pd thickness of 2.2 nm) were deposited on mica substrates at substrate temperatures Ts of 20°C and 200°C, after prior deposition of a 100 nm Pd underlayer at 450°C.

Sign in / Sign up

Export Citation Format

Share Document