scholarly journals MHD darcy-forchheimer nanofluid flow and entropy optimization in an odd-shaped enclosure filled with a (MWCNT-Fe3O4/water) using galerkin finite element analysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wael Al-Kouz ◽  
Abderrahmane Aissa ◽  
Aimad Koulali ◽  
Wasim Jamshed ◽  
Hazim Moria ◽  
...  
Keyword(s):  
Finite Element ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Heated Wall ◽  
Entropy Generation Rate ◽  
Hybrid Nanofluid ◽  
Galerkin Finite Element ◽  
The Impact

AbstractMHD nanoliquid convective flow in an odd-shaped cavity filled with a multi-walled carbon nanotube-iron (II, III) oxide (MWCNT-Fe3O4) hybrid nanofluid is reported. The side walls are adiabatic, and the internal and external borders of the cavity are isothermally kept at high and low temperatures of Th and Tc, respectively. The governing equations obtained with the Boussinesq approximation are solved using Galerkin Finite Element Method (GFEM). Impact of Darcy number (Da), Hartmann number (Ha), Rayleigh number (Ra), solid volume fraction (ϕ), and Heated-wall length effect are presented. Outputs are illustrated in forms of streamlines, isotherms, and Nusselt number. The impact of multiple parameters namely Rayleigh number, Darcy number, on entropy generation rate was analyzed and discussed in post-processing under laminar and turbulent flow regimes.

scholarly journals Natural Convection over Two Superellipse Shapes with a Porous Cavity Populated by Nanofluid

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6952
Author(s):  
Noura Alsedais
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Governing Equations ◽  
Porous Layers ◽  
Porous Cavity ◽  
The Mean ◽  
Volume Method

The influences of superellipse shapes on natural convection in a horizontally subdivided non-Darcy porous cavity populated by Cu-water nanofluid are inspected in this paper. The impacts of the inner geometries (n = 0.5,1,1.5,4) Rayleigh number (103 ≤ Ra ≤ 106), Darcy number (10−5 ≤ Da ≤ 10−2), porosity (0.2 ≤ ϵ ≤ 0.8), and solid volume fraction (0.01 ≤ ∅ ≤ 0.05) on nanofluid heat transport and streamlines were examined. The hot superellipse shapes were placed in the cavity’s bottom and top, while the adiabatic boundaries on the flat walls of the cavity were considered. The governing equations were numerically solved using the finite volume method (FVM). It was found that the movement of the nanofluid upsurged as Ra boosted. The temperature distributions in the cavity’s core had an inverse relationship with increasing Rayleigh number. An extra porous resistance at lower Darcy numbers limited the nanofluid’s movement within the porous layers. The mean Nusselt number decreased as the porous resistance increased (Da ≤ 10−4). The flow and temperature were strongly affected as the shape of the inner superellipse grew larger.

scholarly journals Finite Element Study of Bio-Convective Stefan Blowing Ag-MgO/Water Hybrid Nanofluid Induced by Stretching Cylinder Utilizing Non-Fourier and Non-Fick’s Laws

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1735
Author(s):  
Puneet Rana ◽  
Vinita Makkar ◽  
Gaurav Gupta
Keyword(s):  
Finite Element ◽  
Volume Fraction ◽  
Hybrid Nanoparticles ◽  
Physical Parameters ◽  
Hybrid Nanofluid ◽  
Cylindrical Domain ◽  
Galerkin Finite Element ◽  
Buongiorno’S Model ◽  
Incompressible Mhd ◽  
Multiple Slips

In the present framework, an analysis on nanofluid magneto-transport phenomena over an extending cylinder influenced by gyrotactic behavior of algal suspension, is made using the Cattaneo–Christov heat flux (non-Fourier) and mass flux (non-Fick’s) concept in modified Buongiorno’s model. Two dimensional incompressible MHD hybrid nanofluid which comprises chemically reactive hybrid nanomaterials (Ag-MgO NPs) and Stefan blowing effect along with multiple slips is considered. The experimental correlations with their dependency on initial nanoparticle volume fraction are used for viscosity and thermal conductivity of nanofluids. Similarity transformation is used to convert the governing PDE’s into non-linear ODE’s along with boundary conditions, which are solved using the Galerkin Finite Element Method (GFEM). The mesh independent test with different boundary layer thickness (ξ∞) has been conducted by taking both linear and quadratic shape functions to achieve a optimal desired value. The results are calculated for a realistic range of physical parameters. The validation of FEM results shows an excellent correlation with MATLAB bvp5c subroutine. The warmth exhibitions are assessed through modified version of Buongiorno’s model which effectively reflects the significant highlights of Stefan blowing, slip, curvature, free stream, thermophoresis, Brownian motion and bio-convection parameters. The present study in cylindrical domain is relevant to novel microbial fuel cell technologies utilizing hybrid nanoparticles and concept of Stefan blowing with bioconvection phenomena.

scholarly journals Mathematical Modelling of MHD Natural Convection in a Linearly Heated Porous Cavity

2021 ◽  
Vol 8 (1) ◽  
pp. 149-157
Author(s):  
Jino Lawrence ◽  
Vanav Kumar Alagarsamy
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Heat Flow ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Flow Analysis ◽  
Darcy Number ◽  
Magnetic Field Effects ◽  
Porous Cavity

A linear increase in thermal boundaries towards the bottom of the porous cavity is considered for numerical flow analysis on MHD natural convection. The two-dimensional square shaped cavity is filled with the Cu-water nanofluid. The dimensionless equations are considered to interpret the fluid and heat flow inside the cavity with respect to the desired boundaries. The governing equations are solved using the finite difference techniques. The relevant dimensionless parameters used in the present study are Rayleigh number, Darcy number, solid volume fraction of the nanoparticles and Hartmann number to obtain the flow fields. Heatline flows picturization techniques involved in the study analyze the heat flow inside the cavity. As the Rayleigh number and Darcy number increases, an increase in streamlines flow velocity and convection heat transfer is observed. Convective heat transfer is interrupted by increasing the applied magnetic field effects. An improvement in the heat transfer is noticed by increasing the solid volume fraction of the particles.

Effects of uniform or non-uniform heating at bottom wall on MHD mixed convection in a porous cavity saturated by nanofluid

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Subramanian Muthukumar ◽  
Selvaraj Sureshkumar ◽  
Arthanari Malleswaran ◽  
Murugan Muthtamilselvan ◽  
Eswari Prem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Bottom Wall ◽  
Uniform Heating ◽  
The Magnetic Field

Abstract A numerical investigation on the effects of uniform and non-uniform heating of bottom wall on mixed convective heat transfer in a square porous chamber filled with nanofluid in the appearance of magnetic field is carried out. Uniform or sinusoidal heat source is fixed at the bottom wall. The top wall moves in either positive or negative direction with a constant cold temperature. The vertical sidewalls are thermally insulated. The finite volume approach based on SIMPLE algorithm is followed for solving the governing equations. The different parameters connected with this study are Richardson number (0.01 ≤ Ri ≤ 100), Darcy number (10−4 ≤ Da ≤ 10−1), Hartmann number (0 ≤ Ha ≤ 70), and the solid volume fraction (0.00 ≤ χ ≤ 0.06). The results are presented graphically in the form of isotherms, streamlines, mid-plane velocities, and Nusselt numbers for the various combinations of the considered parameters. It is observed that the overall heat transfer rate is low at Ri = 100 in the positive direction of lid movement, whereas it is low at Ri = 1 in the negative direction. The average Nusselt number is lowered on growing Hartmann number for all considered moving directions of top wall with non-uniform heating. The low permeability, Da = 10−4 keeps the flow pattern same dominating the magnetic field, whereas magnetic field strongly affects the flow pattern dominating the high Darcy number Da = 10−1. The heat transfer rate increases on enhancing the solid volume fraction regardless of the magnetic field.

scholarly journals Numerical Investigation of Mixed Convection and Entropy Generation in a Wavy-Walled Cavity Filled with Nanofluid and Involving a Rotating Cylinder

Entropy ◽  
2018 ◽  
Vol 20 (9) ◽  
pp. 664 ◽  
Author(s):  
Ammar Alsabery ◽  
Muneer Ismael ◽  
Ali Chamkha ◽  
Ishak Hashim
Keyword(s):  
Heat Exchange ◽  
Rayleigh Number ◽  
Heat Source ◽  
Mixed Convection ◽  
Volume Fraction ◽  
Numerical Study ◽  
Rotational Velocity ◽  
Geometrical Parameters ◽  
Galerkin Finite Element ◽  
Vertical Walls

This numerical study considers the mixed convection and the inherent entropy generated in Al 2 O 3 –water nanofluid filling a cavity containing a rotating conductive cylinder. The vertical walls of the cavity are wavy and are cooled isothermally. The horizontal walls are thermally insulated, except for a heat source segment located at the bottom wall. The dimensionless governing equations subject to the selected boundary conditions are solved numerically using the Galerkin finite-element method. The study is accomplished by inspecting different ranges of the physical and geometrical parameters, namely, the Rayleigh number ( 10 3 ≤ R a ≤ 10 6 ), angular rotational velocity ( 0 ≤ Ω ≤ 750 ), number of undulations ( 0 ≤ N ≤ 4 ), volume fraction of Al 2 O 3 nanoparticles ( 0 ≤ ϕ ≤ 0.04 ), and the length of the heat source ( 0.2 ≤ H ≤ 0.8 ) . The results show that the rotation of the cylinder boosts the rate of heat exchange when the Rayleigh number is less than 5 × 10 5 . The number of undulations affects the average Nusselt number for a still cylinder. The rate of heat exchange increases with the volume fraction of the Al 2 O 3 nanoparticles and the length of the heater segment.

Heatline and Massline Visualization of Hydromagnetic Double Diffusive Convective Flow of Nanofluid Within a Porous Trapezoidal Cavity

2021 ◽  
Vol 10 (2) ◽  
pp. 270-284
Author(s):  
Bikash C. Saha ◽  
T. R. Mahapatra ◽  
Dulal Pal
Keyword(s):  
Aspect Ratio ◽  
Convective Flow ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Temperature Fields ◽  
Computational Domain ◽  
Aspect Ratios ◽  
Numerical Predictions ◽  
Double Diffusive

Double diffusive convective flow of nanofluid within a porous trapezoidal cavity of various aspect ratios consisting of Al2O3 nanoparticle in the presence of applied magnetic field in the direction perpendicular to the parallel top and bottom walls is analysed. The side walls of the cavity are maintained at constant temperature and concentration while its horizontal walls are insulated and impermeable. The irregular physical domain of the problem is transformed to a regular unit square computational domain. The governing equations have been solved by second order of finite difference method (FDM). Based upon numerical predictions, the effects of pertinent parameters such as Rayleigh number, Darcy number, aspect ratio, solid volume fraction and inclination angle on the flow and temperature fields and the heat transfer performance of the enclosure are examined. It is found that the intensity of heat and mass transfer increases with the increase in the Darcy number and aspect ratio. It is also observed that as the solid volume fraction increases there is increase in the average Nusselt number but reverse effect is observed on the average Sherwood number.

Influence of Cu-Water and CNT-Water Nanofluid on Natural Convection Heat Transfer in a Triangular Solar Collector

2020 ◽  
Author(s):  
Didarul Ahasan Redwan ◽  
Md. Habibur Rahman ◽  
Hasib Ahmed Prince ◽  
Emdadul Haque Chowdhury ◽  
M. Ruhul Amin
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Solar Collector ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Convection Heat

Abstract A numerical study on natural convection heat transfer in a right triangular solar collector filled with CNT-water and Cuwater nanofluids has been conducted. The inclined wall and the bottom wall of the cavity are maintained at a relatively lower temperature (Tc), and higher temperature (Th), respectively, whereas the vertical wall, is kept adiabatic. The governing non-dimensional partial differential equations are solved by using the Galerkin weighted residual finite element method. The Rayleigh number (Ra) and the solid volume-fraction of nanoparticles (ϕ) are varied in the range of 103 ≤ Ra ≤ 106, and 0 ≤ ϕ ≤ 0.1, respectively, to carry out the parametric simulations within the laminar region. Corresponding thermal and flow fields are presented via isotherms and streamlines. Variations of average Nusselt number as a function of Rayleigh number have been examined for different solid volume-fraction of nanoparticles. It has been found that the natural convection heat transfer becomes stronger with the increment of solid volume fraction and Rayleigh number, but the strength of circulation reduces with increasing nanoparticles’ concentration at low Ra. Conduction mode dominates for lower Ra up to a certain limit of 104. It is also observed that when the solid volume fraction is increased from 0 to 0.1 for a particular Rayleigh number, the average Nusselt number is increased to a great extent, but surprisingly, the rate of increment is more pronounced at lower Ra. Moreover, it is seen that Cu-water nanofluid offers slightly better performance compared to CNT-water but the difference is very little, especially at lower Ra.

scholarly journals Effects of circular corners and aspect-ratio on entropy generation due to natural convection of nanofluid flows in rectangular cavities

2015 ◽  
Vol 19 (5) ◽  
pp. 1621-1632 ◽  
Author(s):  
Mahmoud Salari ◽  
Ali Mohammadtabar ◽  
Mohammad Mohammadtabar
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Bejan Number ◽  
Total Entropy ◽  
Aspect Ratios ◽  
Corner Radius

In this paper, entropy generation induced by natural convection of cu-water nanofluid in rectangular cavities with different circular corners and different aspect-ratios were numerically investigated. The governing equations were solved using a finite volume approach and the SIMPLE algorithm was used to couple the pressure and velocity fields. The results showed that the total entropy generation increased with the increase of Rayleigh number, irreversibility coefficient, aspect ratio or solid volume fraction while it decreased with the increase of the corner radius. It should be noted that the best way for minimizing entropy generation is decreasing Rayleigh number. This is the first priority for minimizing entropy generation. The other parameters such as radius, volume fraction, etc are placed on the second priority. However, Bejan number had an inverse trend compared with total entropy generation. As an exception, Bejan number and total entropy number had the same trend whenever solid volume fraction increased. Moreover, Nusselt number increased as Rayleigh number, solid volume fraction or aspect ratio increased whereas it decreases with the increase of corner radius.

scholarly journals Mixed convective hybrid nanofluid flow in lid-driven undulated cavity: effect of MHD and Joule heating

2019 ◽  
Vol 16 (2) ◽  
pp. 109-126 ◽  
Author(s):  
Ishrat Zahan ◽  
R Nasrin ◽  
M A Alim
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Rate ◽  
Joule Heating ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Hybrid Nanoparticles ◽  
Wave Number ◽  
Hybrid Nanofluid

A numerical analysis has been conducted to show the effects of magnetohydrodynamic (MHD) and Joule heating on heat transfer phenomenon in a lid driven triangular cavity. The heat transfer fluid (HTF) has been considered as water based hybrid nanofluid composed of equal quantities of Cu and TiO2 nanoparticles. The bottom wall of the cavity is undulated in sinusoidal pattern and cooled isothermally. The left vertical wall of the cavity is heated while the inclined side is insulated. The two dimensional governing partial differential equations of heat transfer and fluid flow with appropriate boundary conditions have been solved by using Galerkin's finite element method built in COMSOL Multyphysics. The effects of Hartmann number, Joule heating, number of undulation and Richardson number on the flow structure and heat transfer characteristics have been studied in details. The values of Prandtl number and solid volume fraction of hybrid nanoparticles have been considered as fixed. Also, the code validation has been shown. The numerical results have been presented in terms of streamlines, isotherms and average Nusselt number of the hybrid nanofluid for different values of governing parameters. The comparison of heat transfer rate by using hybrid nanofluid, Cu-water nanofluid,  TiO2 -water nanofluid and clear water has been also shown. Increasing wave number from 0 to 3 enhances the heat transfer rate by 16.89%. The enhanced rate of mean Nusselt number for hybrid nanofluid is found as 4.11% compared to base fluid.

Numerical treatment for Casson liquid flow in a microchannel due to porous medium: A hybrid nanoparticles aspects

2021 ◽  
pp. 095440622110089
Author(s):  
Gombi Rachappa Manohar ◽  
Puttaswamy Venkatesh ◽  
Bijjanal Jayanna Gireesha ◽  
Gosikere Kenchappa Ramesh
Keyword(s):  
Porous Medium ◽  
Volume Fraction ◽  
Flow Behavior ◽  
Solid Volume Fraction ◽  
Velocity Slip ◽  
Casson Fluid ◽  
Hybrid Nanoparticles ◽  
Hybrid Nanofluid ◽  
Current Investigation ◽  
Numerical Treatment

In the current investigation a mathematical model is simplified to explore the numerical treatment for the thermal and flow behavior in a magneto hydrodynamics Casson fluid through a micro channel by taking [Formula: see text] nanoparticles. The combined effects of temperature jump, porous medium and velocity slip are incorporated. Using the dimensionless variables one can obtain the governing differential equations thereafter resolved numerically using RKF45 method. The velocity, temperature, skin friction and Nusselt number coefficient are addressed for different pertaining parameter. The upshots of the current investigation are visualized through graphically elucidation. Out comes shows that larger values of solid volume fraction decreases both velocity and temperature field. Furthermore drag coefficient is increases for increase in magnetic parameter, also hybrid nanofluid gives more impact than nanofluid.

Sign in / Sign up

Export Citation Format

Share Document