scholarly journals Wind plants can impact long-term local atmospheric conditions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Nicola Bodini ◽  
Julie K. Lundquist ◽  
Patrick Moriarty
Keyword(s):  
Wind Speed ◽  
Urban Areas ◽  
Weather Prediction ◽  
Atmospheric Conditions ◽  
Near Surface ◽  
Direct Observations ◽  
Stable Conditions ◽  
Weather And Climate ◽  
Central United States

AbstractLong-term weather and climate observatories can be affected by the changing environments in their vicinity, such as the growth of urban areas or changing vegetation. Wind plants can also impact local atmospheric conditions through their wakes, characterized by reduced wind speed and increased turbulence. We explore the extent to which the wind plants near an atmospheric measurement site in the central United States have affected their long-term measurements. Both direct observations and mesoscale numerical weather prediction simulations demonstrate how the wind plants induce a wind deficit aloft, especially in stable conditions, and a wind speed acceleration near the surface, which extend $$\sim 30$$ ∼ 30  km downwind of the wind plant. Turbulence kinetic energy is significantly enhanced within the wind plant wake in stable conditions, with near-surface observations seeing an increase of more than 30% a few kilometers downwind of the plants.

scholarly journals On the Use of Rotary-Wing Aircraft to Sample Near-Surface Thermodynamic Fields: Results from Recent Field Campaigns

Sensors ◽  
2018 ◽  
Vol 19 (1) ◽  
pp. 10 ◽  
Author(s):  
Temple Lee ◽  
Michael Buban ◽  
Edward Dumas ◽  
C. Baker
Keyword(s):  
Weather Prediction ◽  
Chemical Properties ◽  
Unmanned Aircraft ◽  
Unmanned Aircraft Systems ◽  
Spatiotemporal Variability ◽  
Near Surface ◽  
Field Campaigns ◽  
High Level ◽  
Rotary Wing

Rotary-wing small unmanned aircraft systems (sUAS) are increasingly being used for sampling thermodynamic and chemical properties of the Earth’s atmospheric boundary layer (ABL) because of their ability to measure at high spatial and temporal resolutions. Therefore, they have the potential to be used for long-term quasi-continuous monitoring of the ABL, which is critical for improving ABL parameterizations and improving numerical weather prediction (NWP) models through data assimilation. Before rotary-wing aircraft can be used for these purposes, however, their performance and the sensors used therein must be adequately characterized. In the present study, we describe recent calibration and validation procedures for thermodynamic sensors used on two rotary-wing aircraft: A DJI S-1000 and MD4-1000. These evaluations indicated a high level of confidence in the on-board measurements. We then used these measurements to characterize the spatiotemporal variability of near-surface (up to 300-m AGL) temperature and moisture fields as a component of two recent field campaigns: The Verification of the Origins of Rotation in Tornadoes Experiment in the Southeast U.S. (VORTEX-SE) in Alabama, and the Land Atmosphere Feedback Experiment (LAFE) in northern Oklahoma.

An Investigation of the Stability Dependence of SST-Induced Vertical Mixing over the Ocean in the Operational Met Office Model

2017 ◽  
Vol 30 (1) ◽  
pp. 91-107 ◽  
Author(s):  
Qingtao Song ◽  
Dudley B. Chelton ◽  
Steven K. Esbensen ◽  
Andrew R. Brown
Keyword(s):  
Wind Speed ◽  
Weather Prediction ◽  
Surface Wind ◽  
Vertical Mixing ◽  
Surface Wind Speed ◽  
Satellite Observations ◽  
Sea Surface ◽  
Stable Conditions ◽  
Wide Range ◽  
The Impact

This study presents an assessment of the impact of a March 2006 change in the Met Office operational global numerical weather prediction model through the introduction of a nonlocal momentum mixing scheme. From comparisons with satellite observations of surface wind speed and sea surface temperature (SST), it is concluded that the new parameterization had a relatively minor impact on SST-induced changes in sea surface wind speed in the Met Office model in the September and October 2007 monthly averages over the Agulhas Return Current region considered here. The performance of the new parameterization of vertical mixing was evaluated near the surface layer and further through comparisons with results obtained using a wide range of sensitivity of mixing parameterization to stability in the Weather Research and Forecasting (WRF) Model, which is easily adapted to such sensitivity studies. While the new parameterization of vertical mixing improves the Met Office model response to SST in highly unstable (convective) conditions, it is concluded that significantly enhanced vertical mixing in the neutral to moderately unstable conditions (nondimensional stability [Formula: see text] between 0 and −2) typically found over the ocean is required in order for the model surface wind response to SST to match the satellite observations. Likewise, the reduced mixing in stable conditions in the new parameterization is also relatively small; for the range of the gradient Richardson number typically found over the ocean, the mixing was reduced by a maximum of only 10%, which is too small by more than an order of magnitude to be consistent with the satellite observations.

scholarly journals Local and Mesoscale Impacts of Wind Farms as Parameterized in a Mesoscale NWP Model

2012 ◽  
Vol 140 (9) ◽  
pp. 3017-3038 ◽  
Author(s):  
Anna C. Fitch ◽  
Joseph B. Olson ◽  
Julie K. Lundquist ◽  
Jimy Dudhia ◽  
Alok K. Gupta ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Kinetic Energy ◽  
Wind Farm ◽  
Weather Prediction ◽  
Wind Farms ◽  
Mean Flow ◽  
Thrust Coefficient ◽  
Near Surface ◽  
Neutral Boundary Layer

Abstract A new wind farm parameterization has been developed for the mesoscale numerical weather prediction model, the Weather Research and Forecasting model (WRF). The effects of wind turbines are represented by imposing a momentum sink on the mean flow; transferring kinetic energy into electricity and turbulent kinetic energy (TKE). The parameterization improves upon previous models, basing the atmospheric drag of turbines on the thrust coefficient of a modern commercial turbine. In addition, the source of TKE varies with wind speed, reflecting the amount of energy extracted from the atmosphere by the turbines that does not produce electrical energy. Analyses of idealized simulations of a large offshore wind farm are presented to highlight the perturbation induced by the wind farm and its interaction with the atmospheric boundary layer (BL). A wind speed deficit extended throughout the depth of the neutral boundary layer, above and downstream from the farm, with a long wake of 60-km e-folding distance. Within the farm the wind speed deficit reached a maximum reduction of 16%. A maximum increase of TKE, by nearly a factor of 7, was located within the farm. The increase in TKE extended to the top of the BL above the farm due to vertical transport and wind shear, significantly enhancing turbulent momentum fluxes. The TKE increased by a factor of 2 near the surface within the farm. Near-surface winds accelerated by up to 11%. These results are consistent with the few results available from observations and large-eddy simulations, indicating this parameterization provides a reasonable means of exploring potential downwind impacts of large wind farms.

scholarly journals Homogenization and Trend Analysis of Canadian Near-Surface Wind Speeds

2010 ◽  
Vol 23 (5) ◽  
pp. 1209-1225 ◽  
Author(s):  
Hui Wan ◽  
Xiaolan L. Wang ◽  
Val R. Swail
Keyword(s):  
Wind Speed ◽  
Trend Analysis ◽  
Surface Wind ◽  
Surface Wind Speed ◽  
The United States ◽  
Homogeneity Test ◽  
Near Surface ◽  
Wind Speeds ◽  
Long Term Trends

Abstract Near-surface wind speeds recorded at 117 stations in Canada for the period from 1953 to 2006 were analyzed in this study. First, metadata and a logarithmic wind profile were used to adjust hourly wind speeds measured at nonstandard anemometer heights to the standard 10-m level. Monthly mean near-surface wind speed series were then derived and subjected to a statistical homogeneity test, with homogeneous monthly mean geostrophic wind (geowind) speed series being used as reference series. Homogenized monthly mean near-surface wind speed series were obtained by adjusting all significant mean shifts, using the results of the statistical test and modeling along with all available metadata, and were used to assess the long-term trends. This study shows that station relocation and anemometer height change are the main causes for discontinuities in the near-surface wind speed series, followed by instrumentation problems or changes, and observing environment changes. It also shows that the effects of artificial mean shifts on the results of trend analysis are remarkable, and that the homogenized near-surface wind speed series show good spatial consistency of trends, which are in agreement with long-term trends estimated from independent datasets, such as surface winds in the United States and cyclone activity indices and ocean wave heights in the region. These indicate success in the homogenization of the wind data. During the period analyzed, the homogenized near-surface wind speed series show significant decreases throughout western Canada and most parts of southern Canada (except the Maritimes) in all seasons, with significant increases in the central Canadian Arctic in all seasons and in the Maritimes in spring and autumn.

scholarly journals Parameterizations of Sea-Spray Impact on the Air–Sea Momentum and Heat Fluxes

2011 ◽  
Vol 139 (12) ◽  
pp. 3781-3797 ◽  
Author(s):  
J.-W. Bao ◽  
C. W. Fairall ◽  
S. A. Michelson ◽  
L. Bianco
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Weather Prediction ◽  
Heat Fluxes ◽  
Sea Spray ◽  
Surface Boundary ◽  
Near Surface ◽  
The Mean ◽  
Momentum And Heat Fluxes ◽  
The Impact

Abstract This paper focuses on parameterizing the effect of sea spray at hurricane-strength winds on the momentum and heat fluxes in weather prediction models using the Monin–Obukhov similarity theory (a common framework for the parameterizations of air–sea fluxes). In this scheme, the mass-density effect of sea spray is considered as an additional modification to the stratification of the near-surface profiles of wind, temperature, and moisture in the marine surface boundary layer (MSBL). The overall impact of sea-spray droplets on the mean profiles of wind, temperature, and moisture depends on the wind speed at the level of sea-spray generation. As the wind speed increases, the mean droplet size and the mass flux of sea-spray increase, rendering an increase of stability in the MSBL and the leveling-off of the surface drag. Sea spray also tends to increase the total air–sea sensible and latent heat fluxes at high winds. Results from sensitivity testing of the scheme in a numerical weather prediction model for an idealized case of hurricane intensification are presented along with a dynamical interpretation of the impact of the parameterized sea-spray physics on the structure of the hurricane boundary layer.

scholarly journals Interactions Between the Nocturnal Low-Level Jets and the Urban Boundary Layer: A Case Study over London

2022 ◽  
Author(s):  
Aristofanis Tsiringakis ◽  
Natalie E. Theeuwes ◽  
Janet F. Barlow ◽  
Gert-Jan Steeneveld
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Urban Areas ◽  
Prediction Models ◽  
Weather Prediction ◽  
Urban Boundary Layer ◽  
Limited Area ◽  
Low Level ◽  
Low Level Jets

AbstractUnderstanding the physical processes that affect the turbulent structure of the nocturnal urban boundary layer (UBL) is essential for improving forecasts of air quality and the air temperature in urban areas. Low-level jets (LLJs) have been shown to affect turbulence in the nocturnal UBL. We investigate the interaction of a mesoscale LLJ with the UBL during a 60-h case study. We use observations from two Doppler lidars and results from two high-resolution numerical-weather-prediction models (Weather Research and Forecasting model, and the Met Office Unified Model for limited-area forecasts for the U.K.) to study differences in the occurrence frequency, height, wind speed, and fall-off of LLJs between an urban (London, U.K.) and a rural (Chilbolton, U.K.) site. The LLJs are elevated ($$\approx $$ ≈ 70 m) over London, due to the deeper UBL, while the wind speed and fall-off are slightly reduced with respect to the rural LLJ. Utilizing two idealized experiments in the WRF model, we find that topography strongly affects LLJ characteristics, but there is still a substantial urban influence. Finally, we find that the increase in wind shear under the LLJ enhances the shear production of turbulent kinetic energy and helps to maintain the vertical mixing in the nocturnal UBL.

scholarly journals Intercomparison of wind observations from ESA's satellite mission Aeolus, ERA5 reanalysis and radiosonde over China

2021 ◽  
Author(s):  
Boming Liu ◽  
Jianping Guo ◽  
Wei Gong ◽  
Yong Zhang ◽  
Lijuan Shi ◽  
...  
Keyword(s):  
Wind Speed ◽  
Weather Prediction ◽  
Mean Difference ◽  
Tibet Plateau ◽  
Satellite Mission ◽  
Height Range ◽  
Climate Change Research ◽  
Near Surface ◽  
Speed Difference ◽  
Zonal Winds

Abstract. The European Space Agency (ESA) Earth Explorer Atmospheric Dynamics Mission Aeolus is the first satellite mission providing wind profile information on a global scale, and its wind products have been released on 12 May 2020. In this study, we verify and intercompare the wind observations from ESA’s satellite mission Aeolus and the European Centre for Medium-Range Weather Forecasts (ECMWF) fifth generation atmospheric reanalyses (ERA5) with radiosonde (RS) observations over China, to allow a fitting application of Aeolus winds. Aeolus provides wind observations in aerosol-free (referred to as Rayleigh-clear winds) and cloudy atmospheres (Mie-cloudy winds). In terms of Aeolus and RS winds, the correlation coefficient (R) and mean difference of Rayleigh-clear (Mie-cloudy) vs RS winds are 0.90 (0.92) and 0.09±9.62 (−0.59±8.05) m/s, respectively. The vertical profiles of wind speed differences between Aeolus and RS winds are opposite to each other during ascending and descending orbits, indicating that the performance of Aeolus wind product is affected by the orbit phase. The comparison of ECMWF winds relative to Aeolus winds provides the R and mean difference of Rayleigh-clear (Mie-cloudy) winds, which are 0.95 (0.97) and −0.16±6.78 (−0.21±3.91) m/s, respectively. The Rayleigh-clear and Mie-cloudy winds are almost consistent with the ECMWF winds, likely due to the assimilation of Aeolus wind observations into the ECMWF winds. Moreover, we find that among the results of comparing Aeolus with RS and ECMWF winds, the wind speed difference of Rayleigh-clear winds is large in the height range of 0–1 km, especially during descending orbits. This indicates that the performance of low-altitude Rayleigh-clear wind products could be affected by the near-surface aerosols. In addition, the R and mean difference between ERA5 and RS zonal wind components are 0.89 and −1.46±6.33 m/s, respectively. The RS zonal winds tend to be larger than those from ERA5. The wind speed difference between RS and ERA5 zonal winds in low-lying area is low and insignificant, while it is relatively high and significant over the Qinghai-Tibet Plateau areas. Overall, the Aeolus winds over China are similar to the RS and ECMWF winds. The RS and ERA5 zonal winds are somewhat different over high altitude area, but these differences are acceptable for application of wind products. The findings give us sufficient confidence and information to apply Aeolus wind products in numerical weather prediction in China and in climate change research.

Impact of assimilation of radiosonde and UAV observations on numerical weather prediction analyses and forecasts in the Arctic and Antarctic

2020 ◽  
Author(s):  
Timo Vihma ◽  
Tuomas Naakka ◽  
Qizhen Sun ◽  
Tiina Nygård ◽  
Michael Tjernström ◽  
...  
Keyword(s):  
Wind Speed ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
The Arctic ◽  
Observation Site ◽  
Near Surface ◽  
Numerical Weather ◽  
Background Fields ◽  
The Impact

<p>Weather forecasting in the Arctic and Antarctic is a challenge above all due to rarity of observations to be assimilated in numerical weather prediction (NWP) models. As observations are expensive and logistically challenging, it is important to evaluate the benefit that additional observations could bring to NWP.</p><p>Considering the Arctic, in this study the effects of the spatial coverage of the network on numerical weather prediction were evaluated by comparing radiosonde observations from land station taken from Integrated Global Radiosonde Archive (IGRA) and radiosonde observations from expeditions in the Arctic Ocean with operational analyses and background fields (12‐hr forecasts) of the European Centre for Medium Range Weather Forecasts (ECMWF). The focus was on 850 hPa level temperature for the period January 2016 – September 2018. Comparison of the analyses and background fields showed that radiosoundings had a remarkable impact on improving operational analyses but the impact had a large geographical variation. In particular, radiosonde observations from islands (Jan Mayen and Bear Island) in the northern North Atlantic and from Arctic expeditions substantially improved analyses suggesting that those observations were critical for the quality of analyses and forecasts. Comparison of two cases with and without assimilation of radiosonde sounding data from expeditions of Icebreaker Oden in 2016 and 2018 in the central Artic Ocean showed that satellite observations were not able to compensate for the large spatial gap in the radiosounding network. In the areas where the network is reasonably dense, the density of the sounding network was not the most critical factor for the quality of background fields. Instead, the quality of background field was more related to how radiosonde observations were utilized in the assimilation and to the quality of those observations.</p><p>Considering the Antarctic, we applied radiosonde sounding and Unmanned Aerial Vehicles (UAV) observations from an RV Polarstern cruise in the ice-covered Weddell Sea in austral winter 2013 to evaluate the impact of their assimilation in the Polar version of the Weather Research and Forecasting (Polar WRF) model. Our experiments revealed small or moderate impacts of radiosonde and UAV data assimilation. In any case, the assimilation of sounding data from both radiosondes and UAVs improved the analyses of air temperature, wind speed, and humidity at the observation site for most of the time. Further, the impact on the results of 5-day long Polar WRF experiments was often felt over distances of at least 300 km from the observation site. All experiments succeeded in capturing the main features of the evolution of near-surface variables, but the effects of data assimilation varied between different cases. Due to the limited vertical extent of the UAV observations, the impact of their assimilation was limited to the lowermost 1-2 km layer, and assimilation of radiosonde data was more beneficial for modelled sea level pressure and near-surface wind speed. Considering the perspectives for technological advance, atmospheric soundings applying UAV have a large potential to supplement conventional radiosonde sounding observations.</p><p>The differences in the results obtained for the Arctic and Antarctic are discussed.</p>

Impacts of Air–Sea Flux Parameterizations on the Intensity and Structure of Tropical Cyclones

2013 ◽  
Vol 141 (7) ◽  
pp. 2308-2324 ◽  
Author(s):  
Benjamin W. Green ◽  
Fuqing Zhang
Keyword(s):  
Wind Speed ◽  
Tropical Cyclone ◽  
Tropical Cyclones ◽  
Latent Heat ◽  
Weather Prediction ◽  
Surface Flux ◽  
Surface Fluxes ◽  
Sensible Heat ◽  
Near Surface ◽  
Flux Parameterization

Abstract Fluxes of momentum and moist enthalpy across the air–sea interface are believed to be one of the most important factors in determining tropical cyclone intensity. Because these surface fluxes cannot be directly resolved by numerical weather prediction models, their impacts on tropical cyclones must be accounted for through subgrid-scale parameterizations. There are several air–sea surface flux parameterization schemes available in the Weather Research and Forecasting (WRF) Model; these schemes differ from one another in their formulations of the wind speed–dependent exchange coefficients of momentum, sensible heat, and moisture (latent heat). The effects of surface fluxes on the intensity and structure of tropical cyclones are examined through convection-permitting WRF simulations of Hurricane Katrina (2005). It is found that the intensity (and, to a lesser extent, structure) of the simulated storms is sensitive to the choice of surface flux parameterization scheme. In agreement with recent studies, the drag coefficient CD is found to affect the pressure–wind relationship (between minimum sea level pressure and maximum 10-m wind speed) and to change the radius of maximum near-surface winds of the tropical cyclone. Fluxes of sensible and latent heat (i.e., moist enthalpy) affect intensity but do not significantly change the pressure–wind relationship. Additionally, when low-level winds are strong, the contribution of dissipative heating to calculations of sensible heat flux is not negligible. Expanding the sensitivity tests to several dozen cases from the 2008 to 2011 Atlantic hurricane seasons demonstrates the robustness of these findings.

Sign in / Sign up

Export Citation Format

Share Document