scholarly journals Photocrosslinkable liver extracellular matrix hydrogels for the generation of 3D liver microenvironment models

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Akhilandeshwari Ravichandran ◽  
Berline Murekatete ◽  
Denise Moedder ◽  
Christoph Meinert ◽  
Laura J. Bray
Keyword(s):  
Mechanical Properties ◽  
Extracellular Matrix ◽  
Cancer Metastasis ◽  
Sodium Dodecyl ◽  
3D Cell Culture ◽  
Ammonium Hydroxide ◽  
Porcine Liver ◽  
Thermal Gelation ◽  
Triton X ◽  
Drug Studies

AbstractLiver extracellular matrix (ECM)-based hydrogels have gained considerable interest as biomimetic 3D cell culture environments to investigate the mechanisms of liver pathology, metabolism, and toxicity. The preparation of current liver ECM hydrogels, however, is based on time-consuming thermal gelation and limits the control of mechanical properties. In this study, we used detergent-based protocols to produce decellularized porcine liver ECM, which in turn were solubilized and functionalized with methacrylic anhydride to generate photocrosslinkable methacrylated liver ECM (LivMA) hydrogels. Firstly, we explored the efficacy of two protocols to decellularize porcine liver tissue using varying combinations of commonly used chemical agents such as Triton X-100, Sodium Dodecyl Sulphate (SDS) and Ammonium hydroxide. Then, we demonstrated successful formation of stable, reproducible LivMA hydrogels from both the protocols by photocrosslinking. The LivMA hydrogels obtained from the two decellularization protocols showed distinct mechanical properties. The compressive modulus of the hydrogels was directly dependent on the hydrogel concentration, thereby demonstrating the tuneability of mechanical properties of these hydrogels. Immortalized Human Hepatocytes cells were encapsulated in the LivMA hydrogels and cytocompatibility of the hydrogels was demonstrated after one week of culture. In summary, the LivMA hydrogel system provides a simple, photocrosslinkable platform, which can potentially be used to simulate healthy versus damaged liver for liver disease research, drug studies and cancer metastasis modelling.

scholarly journals Effect of detergent type on the performance of liver decellularized extracellular matrix-based bio-inks

2021 ◽  
Vol 12 ◽  
pp. 204173142199709
Author(s):  
Wonwoo Jeong ◽  
Min Kyeong Kim ◽  
Hyun-Wook Kang
Keyword(s):  
Extracellular Matrix ◽  
Sodium Dodecyl ◽  
Great Influence ◽  
Ammonium Hydroxide ◽  
Sodium Deoxycholate ◽  
Porcine Liver ◽  
Decellularized Extracellular Matrix ◽  
Cytochrome P450 Activity ◽  
Primary Mouse ◽  
Triton X

Decellularized extracellular matrix-based bio-inks (dECM bio-inks) for bioprinting technology have recently gained attention owing to their excellent ability to confer tissue-specific functions and 3D-printing capability. Although decellularization has led to a major advancement in bio-ink development, the effects of detergent type, the most important factor in decellularization, are still unclear. In this study, the effects of various detergent types on bio-ink performance were investigated. Porcine liver-derived dECM bio-inks prepared using widely used detergents, including sodium dodecyl sulfate (SDS), sodium deoxycholate (SDC), Triton X-100 (TX), and TX with ammonium hydroxide (TXA), were characterized in detail. SDS and SDC severely damaged glycosaminoglycan and elastin proteins, TX showed the lowest rate of decellularization, and TXA-based dECM bio-ink possessed the highest ECM content among all bio-inks. Differences in biochemical composition directly affected bio-ink performance, with TXA-dECM bio-ink showing the best performance with respect to gelation kinetics, intermolecular bonding, mechanical properties, and 2D/3D printability. More importantly, cytocompatibility tests using primary mouse hepatocytes also showed that the TXA-dECM bio-ink improved albumin secretion and cytochrome P450 activity by approximately 2.12- and 1.67-fold, respectively, compared with the observed values for other bio-inks. Our results indicate that the detergent type has a great influence on dECM damage and that the higher the dECM content, the better the performance of the bio-ink for 3D bioprinting.

Decellularization of porcine carotid arteries using low-concentration sodium dodecyl sulfate

2020 ◽  
pp. 039139882097542
Author(s):  
Jin Cheng ◽  
Ji Li ◽  
Zhiwen Cai ◽  
Yuehao Xing ◽  
Cong Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Sodium Dodecyl Sulfate ◽  
Carotid Arteries ◽  
Sodium Dodecyl ◽  
Dimensional Structure ◽  
Low Concentration ◽  
Dodecyl Sulfate ◽  
Decellularized Scaffolds ◽  
Triton X

Background: The decellularized scaffold is a promising material for producing tissue-engineered vascular grafts (TEVGs) because of its complex, native-like three-dimensional structure and mechanical properties. Sodium dodecyl sulfate (SDS), one of the most commonly used decellularization reagents, appears to be more effective than other detergents for removing cells from dense tissues. The concentrations of SDS used in previous studies and their effects on decellularization are not consistent. Methods: In this study, porcine carotid arteries were decellularized using detergent-based protocols using Triton X-100 followed by SDS at different concentrations and exposing time. Cell removal efficiency and composition were evaluated by histological analysis, and DNA and collagen quantification. Ultrastructure, mechanical properties, pore size distribution, and in vivo biocompatibility of decellularized arteries were also evaluated. Results: The DNA content of decellularized scaffolds treated with 0.3% SDS for 72 h or 0.5% SDS for 48 h was significantly less than that treated with 1% SDS for 30 h. There was a significant loss of soluble collagen after treatment with 1% SDS relative to native arteries. The extensive loss of elastin and glycosaminoglycans was observed in decellularized arteries treated with 0.5% SDS or 1% SDS. The basement membrane and biomechanics were also damaged by these two protocols. Moreover, decellularized scaffolds became more porous with many large pores after treatment with 0.3% SDS. Conclusion: Low-concentration SDS could be a suitable choice for artery decellularization. Decellularized porcine carotid arteries, prepared using Triton X-100 followed by 0.3% SDS, may be a promising biological scaffold for TEVGs.

Creating a tissue-specific microdispersed matrix from a decellularized porcine liver

2020 ◽  
Vol 4 ◽  
pp. 41-50
Author(s):  
A.D. Kirillova ◽  
◽  
Yu.B. Basok ◽  
A.E. Lazhko ◽  
A. M. Grigoryev ◽  
...  
Keyword(s):  
Sodium Dodecyl ◽  
Genetic Material ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Porcine Liver ◽  
Tissue Specific ◽  
Main Components ◽  
Triton X ◽  
Injectable Form

The main problem with decellularization of liver tissue as a tissue-specific matrix/scaffold in liver bioengineered structures is the need to maximize the preservation of the original three-dimensional structure of the tissue and the main components of its extracellular matrix (ECM) while removing cells and genetic material. The attempts to use the existing protocols for the decellularization of other tissues and organs have been unsuccessful. The aim of the work is to develop a method for creation of tissue-specific microdispersed matrix from decellularized porcine liver (TMM DLp). The protocol for decellularization of porcine liver (Lp) fragments has been developed based on the complex application of chemical (sodium dodecyl sulfate and Triton X-100), biochemical (DNase I), and physical (supercritical CO2) methods for treatment the initial tissue. As a result of the found optimal conditions for decellularization of Lp with subsequent cryomicronization of DLp, the injectable form of the microdispersed tissue-specific matrix was obtained, which represents DLp microparticles with the size of 100-200 microns with the residual amount of DNA no more than 10±1.5 ng/mg (less than 1.0%), with the preservation of the microstructure and basic composition of the liver ECM. According to the assessment of biocompatible properties in vitro, TMM DLp samples meet the criteria of biological safety for cytotoxicity and hemolytic activity.

A novel method for providing scaffold: Decellularization of parathyroid capsule

2021 ◽  
pp. 088532822110543
Author(s):  
Nisa İrem Büyük ◽  
Kardelen Tüfekçi ◽  
Alev Cumbul ◽  
Erhan Ayşan ◽  
Gamze Torun Köse
Keyword(s):  
Extracellular Matrix ◽  
Sodium Dodecyl Sulphate ◽  
Dna Analysis ◽  
Structural Integrity ◽  
Sodium Dodecyl ◽  
Parathyroid Tissue ◽  
The Body ◽  
Extracellular Matrix Components ◽  
Triton X ◽  
Sulphated Glycosaminoglycan

This study aimed to generate a novel biomatrix from the decellularized human parathyroid capsule using different methods and to compare the efficiency of decellularization in the means of cell removal, structural integrity and extracellular matrix preservation. The parathyroid capsules, which were carefully dissected from the parathyroid tissue, were randomly divided into four groups and then decellularized using three different protocols: freeze-thaw only, sodium dodecyl sulphate and Triton X-100 treatments after freeze-thawing. Quantitative DNA analysis, agarose gel electrophoresis, sulphated glycosaminoglycan assay, histological analysis, immunohistochemistry and scanning electron microscopy were used to observe the efficiency of parathyroid capsule decellularization and preservation of extracellular matrix components. Considering all the results, it can be said that only freeze-thawing is not an effective method in parathyroid capsule decellularization. When the tissue was treated with a detergent agent in addition to freeze-thawing, the amount of DNA decreased by 90% while sulphated glycosaminoglycan amount maintained 50% compared to untreated tissue. Comparing the effects of the two detergents on the preservation of extracellular matrix such as collagen and sulphated glycosaminoglycan, it was seen that the integrity of tissues treated with Triton X-100 was preserved more than tissues treated with sodium dodecyl sulphate. It is concluded that Triton X-100 treatment with freeze-thawing is the most suitable and effective method for decellularizing the human parathyroid capsule. The biomatrix obtained with this method can be applied in the transplantation of parathyroid tissue and other endocrine tissue types in the body.

Decellularised whole ovine testis as a potential bio-scaffold for tissue engineering

2019 ◽  
Vol 31 (11) ◽  
pp. 1665 ◽  
Author(s):  
Aram Akbarzadeh ◽  
Maral Kianmanesh ◽  
Kiarad Fendereski ◽  
Maryam Ebadi ◽  
Seyedeh Sima Daryabari ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Sodium Dodecyl ◽  
Three Dimensional ◽  
Optimal Time ◽  
Second Phase ◽  
Dapi Staining ◽  
Extracellular Matrix Components ◽  
Time Required ◽  
Triton X

The aim of this study was to determine an efficient whole-organ decellularisation protocol of a human-sized testis by perfusion through the testicular arteries. In the first step of this study, we determined the most efficient detergent agent, whereas the second phase delineated the optimal time required for the decellularisation process. Initially sheep testes were decellularised by one of three different detergent agents: sodium dodecyl sulphate (SDS), Triton X-100 and trypsin-ethylenediamine tetraacetic acid (EDTA) solutions, each perfused for 6h. In the second phase, the selected detergent agent was applied for different time periods. A total number of 20 organs were processed during this investigation. The efficacy of the decellularisation process and the preservation of the extracellular matrix components and structure were evaluated by histopathological examinations, 4′,6′-diamidino-2-phenylindole (DAPI) staining, DNA quantification, hydroxyproline measurement, magnetic resonance imaging and scanning electron microscopy. Organ perfusion with 1% SDS solution for 6 to 8h demonstrated the most desirable outcomes regarding decellularisation and extracellular matrix preservation. The 3-[4, 5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide (MTT) assay was used to determine the toxicity of the scaffold and its potential for further application in tissue-engineering investigations. This investigation introduces an efficient method to produce a three-dimensional testicular bio-scaffold resembling the properties of the native organ that could be employed in tissue-engineering studies.

Optimizing the Decellularized Porcine Liver Scaffold Protocol

2020 ◽  
pp. 1-10
Author(s):  
Lanuza Alaby Pinheiro Faccioli ◽  
Grazielle Suhett Dias  ◽  
Victor Hoff ◽  
Marlon Lemos Dias ◽  
Cibele Ferreira Pimentel ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Sodium Deoxycholate ◽  
Vascular Tree ◽  
Porcine Liver ◽  
Triton X

There are few existing methods for shortening the decellularization period for a human-sized whole-liver scaffold. Here, we describe a protocol that enables effective decellularization of the liver obtained from pigs weigh 120 ± 4.2 kg within 72 h. Porcine livers (approx. 1.5 kg) were decellularized for 3 days using a combination of chemical and enzymatic decellularization agents. After trypsin, sodium deoxycholate, and Triton X-100 perfusion, the porcine livers were completely translucent. Our protocol was efficient to promote cell removal, the preservation of extracellular matrix (ECM) components, and vascular tree integrity. In conclusion, our protocol is efficient to promote human-sized whole-liver scaffold decellularization and thus useful to generate bioengineered livers to overcome the shortage of organs.

scholarly journals Examination of Conditions for Optimized Decellularized Liver Preparation

2019 ◽  
pp. 1-8
Author(s):  
Jaeyong Cho ◽  
Yukako Fukuda ◽  
Nana Shirakigawa ◽  
Hiroyuki Ijima
Keyword(s):  
Salt Concentration ◽  
Sodium Dodecyl ◽  
Porcine Liver ◽  
Experimental Conditions ◽  
Liver Preparation ◽  
Liver Structure ◽  
Ph Buffer ◽  
Triton X ◽  
Cellular Components ◽  
Decellularized Liver

Aims: The main aim of our study was to examine the concentration of surfactant that can cause significant disruption of the resulting decellularized liver structure. Furthermore, it is our goal to determine the suitable solvent that can boost the potential of each surfactant. Methodology: The porcine liver discs of 8-mm diameter and 2-mm thickness were prepared. These were soaked in aqueous solution of either sodium dodecyl sulfate (SDS) or Triton X-100 (TX), and placed on a rotational shaking machine (100 rpm). Results: TX was unable to completely remove the cellular components under any of our experimental conditions. The salt concentration did not affect the decellularization in TX. The pH buffer, however, was found to affect the decellularization. Also, in the solvent study, the conditions under which SDS effectively exerted power were not the salt concentration and pH, but the condition that was close to water. We also confirmed that the shrinkage of tissue occurred when decellularization with 0.1% SDS in CMF-PBS. However, 0.1% SDS in distilled water didn't cause the deformation of tissue. This is considered to be due to the low salt concentration of solvent. Conclusion: This work establishes the concentration range of the surfactant that causes the collapse of the cellular structure during decellularization. In addition, the solvent suitable for each surfactant has also been established.

Solubility and adsorption behaviors of chlorophenols in the presence of surfactant

1997 ◽  
Vol 35 (7) ◽  
pp. 123-130 ◽  
Author(s):  
J. C. Liu ◽  
P. S. Chang
Keyword(s):  
Sodium Dodecyl Sulfate ◽  
Critical Micelle Concentration ◽  
Sodium Dodecyl ◽  
Adsorption Behaviors ◽  
Brij 35 ◽  
Important Index ◽  
Dodecyl Sulfate ◽  
Triton X

The solubility of chlorophenols as affected by surfactant was investigated. Three kinds of surfactant, sodium dodecyl sulfate, Triton X-100, and Brij 35, were utilized. The solubilization of chlorophenols by surfactant follows the order of 2,4,6-trichlorophenol > 2,4-dichlorophenol > 2,6-dichlorophenol > 2-chlorophenol; and the critical micelle concentration is an important index. The adsorption reactions of 2,4-dichlorophenol and 2,4,6- trichlorophenol onto hydrous montmorillonite in the presence of surfactant were examined. The presence of surfactant decreased the adsorption of chlorophenols significantly. The roles of hydrophobicity of chlorophenols in solubilization and adsorption behaviors are discussed.

Different submicellar solubilization mechanisms revealed by 1H NMR and 2D diffusion ordered spectroscopy (DOSY)

2020 ◽  
Vol 22 (19) ◽  
pp. 11075-11085
Author(s):  
Mengjian Wu ◽  
Zhaoxia Wu ◽  
Shangwu Ding ◽  
Zhong Chen ◽  
Xiaohong Cui
Keyword(s):  
Nmr Spectroscopy ◽  
Sodium Dodecyl Sulfate ◽  
1H Nmr ◽  
Sodium Dodecyl ◽  
Butyl Methacrylate ◽  
H Nmr ◽  
Molecular Scale ◽  
Two Systems ◽  
Dodecyl Sulfate ◽  
Triton X

Different submicellar solubilization mechanisms of two systems, Triton X-100/tetradecane and sodium dodecyl sulfate (SDS)/butyl methacrylate, are revealed on the molecular scale by 1H NMR spectroscopy and 2D diffusion ordered spectroscopy (DOSY).

Sign in / Sign up

Export Citation Format

Share Document