A thermal interface material based on foam-templated three-dimensional hierarchical porous boron nitride

2018 ◽  
Vol 6 (36) ◽  
pp. 17540-17547 ◽  
Author(s):  
Zhilin Tian ◽  
Jiajia Sun ◽  
Shaogang Wang ◽  
Xiaoliang Zeng ◽  
Shuang Zhou ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Boron Nitride ◽  
Three Dimensional ◽  
High Thermal Conductivity ◽  
Thermal Interface Material ◽  
Thermal Interface ◽  
Hierarchical Porous ◽  
Templated Method

A high thermal conductivity boron nitride based thermal interface material was developed by a foam-templated method.

scholarly journals Innocuous, Highly Conductive, and Affordable Thermal Interface Material with Copper-Based Multi-Dimensional Filler Design

Biomolecules ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 132
Author(s):  
Woochang Kim ◽  
Chihyun Kim ◽  
Wonseok Lee ◽  
Jinsung Park ◽  
Duckjong Kim
Keyword(s):  
Thermal Conductivity ◽  
Low Cost ◽  
Three Dimensional ◽  
Precursor Solution ◽  
High Thermal Conductivity ◽  
Thermal Interface Material ◽  
Interfacial Thermal Resistance ◽  
Thermal Interface ◽  
Wetting Properties ◽  
Earth Abundant

Thermal interface materials (TIMs), typically composed of a polymer matrix with good wetting properties and thermally conductive fillers, are applied to the interfaces of mating components to reduce the interfacial thermal resistance. As a filler material, silver has been extensively studied because of its high intrinsic thermal conductivity. However, the high cost of silver and its toxicity has hindered the wide application of silver-based TIMs. Copper is an earth-abundant element and essential micronutrient for humans. In this paper, we present a copper-based multi-dimensional filler composed of three-dimensional microscale copper flakes, one-dimensional multi-walled carbon nanotubes (MWCNTs), and zero-dimensional copper nanoparticles (Cu NPs) to create a safe and low-cost TIM with a high thermal conductivity. Cu NPs synthesized by microwave irradiation of a precursor solution were bound to MWCNTs and mixed with copper flakes and polyimide matrix to obtain a TIM paste, which was stable even in a high-temperature environment. The cross-plane thermal conductivity of the copper-based TIM was 36 W/m/K. Owing to its high thermal conductivity and low cost, the copper-based TIM could be an industrially useful heat-dissipating material in the future.

Development of a Compliant Nanothermal Interface Material

2011 ◽  
Author(s):  
David Shaddock ◽  
Stanton Weaver ◽  
Ioannis Chasiotis ◽  
Binoy Shah ◽  
Dalong Zhong
Keyword(s):  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Thermal Stresses ◽  
Performance Testing ◽  
High Thermal Conductivity ◽  
Thermal Interface Material ◽  
Thermal Interface Materials ◽  
Thermal Interface ◽  
Bondline Thickness ◽  
Interface Materials

The power density requirements continue to increase and the ability of thermal interface materials has not kept pace. Increasing effective thermal conductivity and reducing bondline thickness reduce thermal resistance. High thermal conductivity materials, such as solders, have been used as thermal interface materials. However, there is a limit to minimum bondline thickness in reducing resistance due to increased fatigue stress. A compliant thermal interface material is proposed that allows for thin solder bondlines using a compliant structure within the bondline to achieve thermal resistance <0.01 cm2C/W. The structure uses an array of nanosprings sandwiched between two plates of materials to match thermal expansion of their respective interface materials (ex. silicon and copper). Thin solder bondlines between these mating surfaces and high thermal conductivity of the nanospring layer results in thermal resistance of 0.01 cm2C/W. The compliance of the nanospring layer is two orders of magnitude more compliant than the solder layers so thermal stresses are carried by the nanosprings rather than the solder layers. The fabrication process and performance testing performed on the material is presented.

Development of a Metal Micro-Textured Thermal Interface Material

2009 ◽  
Author(s):  
R. Kempers ◽  
R. Frizzell ◽  
A. Lyons ◽  
A. J. Robinson
Keyword(s):  
Thermal Conductivity ◽  
Applied Pressure ◽  
Solid Particles ◽  
High Thermal Conductivity ◽  
Thermal Interface Material ◽  
Filler Materials ◽  
Mechanical And Thermal Properties ◽  
Metal Foil ◽  
Thermal Interface ◽  
Thermally Conductive

Typical thermal interface materials (TIMs) consist of high thermal conductivity solid particles dispersed in a continuous, low thermal conductivity organic compound. Despite using filler materials of very high thermal conductivity, the effective thermal conductivity of these TIMs is often two orders of magnitude lower than the pure filler materials. In addition, dispensing and flow of the particle-matrix composite results in voids being trapped within the bond. To address these issues, a novel metal micro-textured thermal interface material (MMT-TIM) has been developed. This material consists of a thin metal foil with raised micro-scale features that plastically deform under an applied pressure thereby creating a continuous, thermally conductive, path between the mating surfaces. Numerical tools have been developed that couple the mechanical and thermal properties and behaviour of MMT-TIMs as they undergo large-plastic deformation during assembly. This study presents the modelling approach and predictions of MMT-TIM performance based on these numerical techniques. The predictions show good agreement with experimental results, which were obtained using prototype MMT-TIMs and an advanced TIM characterization facility. Finally, a future outlook for this technology is presented based on these promising initial results.

Verbesserte Wärmeableitung sorgt für kühlere Motorventile

Konstruktion ◽  
2017 ◽  
Vol 69 (11-12) ◽  
pp. IW8-IW9
Keyword(s):  
Thermal Conductivity ◽  
High Thermal Conductivity ◽  
Thermal Interface Material ◽  
Thermal Interface ◽  
Eine Verbesserte

Auf der IAA 2017 in Frankfurt stellte Federal-Mogul Powertrain neue Werkstoffe für Ventilsitze und -führungen mit verbesserter Wärmeableitung vor (Bild 1). Die serienreifen Materialien High Thermal Conductivity (HTC) und die Beschichtung mit Thermal Interface Material (TIM) können die Temperaturen am Ventilteller um bis zu 70 °C reduzieren. Dies ermöglicht eine verbesserte Verbrennung und niedrigere Emissionen.

Sodium Silicate Based Thermal Interface Material for High Thermal Contact Conductance

1999 ◽  
Vol 122 (2) ◽  
pp. 128-131 ◽  
Author(s):  
Yunsheng Xu ◽  
Xiangcheng Luo ◽  
D. D. L. Chung
Keyword(s):  
Thermal Conductivity ◽  
Boron Nitride ◽  
Sodium Silicate ◽  
Hexagonal Boron Nitride ◽  
Thermal Contact ◽  
Mineral Oil ◽  
Thermal Interface Material ◽  
Thermal Contact Conductance ◽  
Thermal Interface ◽  
Contact Conductance

Sodium silicate based thermal interface pastes give higher thermal contact conductance across conductor surfaces than polymer based pastes and oils, due to their higher fluidity and the consequent greater conformability. Addition of hexagonal boron nitride particles up to 16.0 vol. percent further increases the conductance of sodium silicate, due to the higher thermal conductivity of BN. However, addition beyond 16.0 vol. percent BN causes the conductance to decrease, due to the decrease in fluidity. At 16.0 vol. percent BN, the conductance is up to 63 percent higher than those given by silicone based pastes and is almost as high as that given by solder. Water is almost as effective as sodium silicate without filler, but the thermal contact conductance decreases with time due to the evaporation of water. Mineral oil and silicone without filler are much less effective than water or sodium silicate without filler. [S1043-7398(00)00402-3]

scholarly journals An Integrated Approach to Design and Develop High-Performance Polymer-Composite Thermal Interface Material

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 807
Author(s):  
Syed Sohail Akhtar
Keyword(s):  
Thermal Conductivity ◽  
Aspect Ratio ◽  
High Performance ◽  
High Thermal Conductivity ◽  
Thermal Interface Material ◽  
Design Stage ◽  
Filler Concentration ◽  
Melt Mixing ◽  
Thermal Interface ◽  
Wide Range

A computational framework based on novel differential effective medium approximation and mean-field homogenization is used to design high-performance filler-laden polymer thermal interface materials (TIMs). The proposed design strategy has the capability to handle non-dilute filler concentration in the polymer matrix. The effective thermal conductivity of intended thermal interface composites can be tailored in a wide range by varying filler attributes such as size, aspect ratio, orientation, as well as filler–matrix interface with an upper limit imposed by the shear modulus. Serval potential polymers and fillers are considered at the design stage. High-density polyethylene (HDPE) and thermoplastic polyurethane (TPU) with a non-dilute concentration (~60 vol%) of ceramic fillers exhibit high thermal conductivity (4–5 W m−1 K−1) without compromising the high compliance of TIMs. The predicted thermal conductivity and coefficient of thermal expansion are in excellent agreement with measured data of various binary composite systems considering HDPE, TPU, and polypropylene (PP) loaded with Al2O3 and AlN fillers in varying sizes, shapes, and concentrations, prepared via the melt-mixing and compression-molding route. The model also validates that manipulating filler alignment and aspect ratio can significantly contribute to making heat-conducting networks in composites, which results in ultra-high thermal conductivity.

scholarly journals Preparation of Boron Nitride and Silicone Rubber Composite Material for Application in Lithium Batteries

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 999
Author(s):  
Yafang Zhang ◽  
Juhua Huang ◽  
Ming Cao ◽  
Guoping Du ◽  
Ziqiang Liu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Composite Material ◽  
Boron Nitride ◽  
Silicone Rubber ◽  
Hexagonal Boron Nitride ◽  
Element Model ◽  
Thermal Interface Material ◽  
Thermal Interface ◽  
Mechanical Stirring ◽  
Battery Thermal Management System

Hexagonal boron nitride and silicone rubber (h-BN/SR) composites were prepared by the mechanical stirring method, and their crystal morphology, chemical structure, thermal properties, and compression stress–strain performance were investigated. The experimental results suggest that silicone rubber combined with h-BN exhibits better thermal conductivity and mechanical properties. When the proportion of h-BN is 30 wt%, the thermal conductivity of the h-BN/SR composite material is 0.58 W/m∙K, which is 3.4 times that of pure silicone rubber. At the same time, the compressive strength of h-BN/SR is 4.27 MPa, which is 6.7 times that of pure silicone rubber. Furthermore, the finite element model was employed to numerically analyze the thermal behavior of a battery with a h-BN/SR composite as the thermal interface material. The analytical results show that the highest temperature of the battery decreased when using h-BN/SR as the thermal interface material in the battery thermal management system. The h-BN/SR composite can thus effectively improve the safety properties of batteries.

Sign in / Sign up

Export Citation Format

Share Document