Efficient microwave traps with markedly enhanced interfacial polarization and impedance matching enabled by dual-shelled, dual-cavity magnetic@dielectric hollow nanospheres

2020 ◽  
Vol 8 (46) ◽  
pp. 16489-16497
Author(s):  
Jiasong Hua ◽  
Wenjun Ma ◽  
Xiaoyun Liu ◽  
Qixin Zhuang ◽  
Zeyang Wu ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
Reflection Loss ◽  
Impedance Matching ◽  
Interfacial Polarization ◽  
Hollow Nanospheres ◽  
Absorption Performance ◽  
Microwave Absorption Performance ◽  
Magnetic Dielectric ◽  
Minimum Reflection Loss

Dual-shelled, dual-cavity Fe3O4@TiO2 hollow nanospheres exhibit an outstanding microwave absorption performance with a minimum reflection loss of −60.17 dB.

scholarly journals High-efficiency and ultra-thin electromagnetic wave absorption xAl2O3-(1-x)Sr0.85Gd0.15TiO3 ceramics in X-band

2020 ◽  
Author(s):  
Hui Xie ◽  
Chaoqun Yang ◽  
Yingying Zhou ◽  
Zhaowen Ren ◽  
Ping Liu
Keyword(s):  
Microwave Absorption ◽  
Reflection Loss ◽  
High Efficiency ◽  
Impedance Matching ◽  
Frequency Dispersion ◽  
Interfacial Polarization ◽  
Peak Frequency ◽  
Microwave Absorbing Materials ◽  
Absorption Performance ◽  
Microwave Absorption Performance

Abstract xAl2O3-(1-x)Sr0.85Gd0.15TiO3(x=0.2, 0.3, 0.4, 0.5) ceramics were fabricated by hot-press sintering. Their morphology, phase composition, conductivity, dielectric properties as well as microwave absorption performance were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), multifunction digital four-probe meter and vector network analysis, respectively. The microwave absorption of as-prepared xAl2O3-(1-x)Sr0.85Gd0.15TiO3 ceramics demonstrates excellent microwave absorbability. It is unexpectedly found that with a thickness of only 0.346 mm, xAl2O3-(1-x)Sr0.85Gd0.15TiO3 (x=0.2) ceramic exhibits an absorption bandwidth of 3.7 GHz (8.7-12.4 GHz), being consequential to reflection loss less than -10 dB (over 90% of microwave absorption). It is as well discovered that the minimum reflection loss and absorption peak frequency of xAl2O3-(1-x)Sr0.85Gd0.15TiO3 (x=0.3) with a thickness of 0.436 mm were -45.43 dB and 11.3 GHz, respectively. The prominent microwave absorption performance of the ceramic with such a thin thickness can be attributed to strong interfacial polarization, dielectric frequency dispersion, and good electromagnetic impedance matching. It indicates that the xAl2O3-(1-x)Sr0.85Gd0.15TiO3 ceramics with appropriate Al2O3 mass fraction and thickness showing good potential for effective microwave absorbing materials.

scholarly journals An Easy Method of Synthesis CoxOy@C Composite with Enhanced Microwave Absorption Performance

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 902
Author(s):  
Wenli Bao ◽  
Cong Chen ◽  
Zhenjun Si
Keyword(s):  
Microwave Absorption ◽  
Impedance Matching ◽  
Interfacial Polarization ◽  
Magnetic Composite ◽  
Easy Method ◽  
Electromagnetic Absorption ◽  
Absorption Performance ◽  
Matched Impedance ◽  
Microwave Absorption Performance ◽  
Minimum Reflection Loss

Design of interface-controllable magnetic composite towards the wideband microwave absorber is greatly significance, however, it still remains challenging. Herein, we designed a spherical-like hybrids, using the Co3O4 and amorphous carbon as the core and shell, respectively. Then, the existed Co3O4 core could be totally reduced by the carbon shell, thus in CoxOy core (composed by Co and Co3O4). Of particular note, the ratios of Co and Co3O4 can be linearly tuned, suggesting the controlled interfaces, which greatly influences the interface loss behavior and electromagnetic absorption performance. The results revealed that the minimum reflection loss value (RLmin) of −39.4 dB could be achieved for the optimal CoxOy@C sample under a thin thickness of 1.4 mm. More importantly, the frequency region with RL < −10 dB was estimated to be 4.3 GHz, ranging from 13.7 to 18.0 GHz. The superior wideband microwave absorption performance was primarily attributed to the multiple interfacial polarization and matched impedance matching ability.

Two-dimensional nanosheets of MoS2: a promising material with high dielectric properties and microwave absorption performance

Nanoscale ◽  
2015 ◽  
Vol 7 (38) ◽  
pp. 15734-15740 ◽  
Author(s):  
Ming-Qiang Ning ◽  
Ming-Ming Lu ◽  
Jing-Bo Li ◽  
Zhuo Chen ◽  
Yan-Kun Dou ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
Microwave Absorption ◽  
Reflection Loss ◽  
Promising Material ◽  
Two Dimensional ◽  
Wide Bandwidth ◽  
Absorption Performance ◽  
High Dielectric ◽  
Microwave Absorption Performance ◽  
Minimum Reflection Loss

MoS2 nanosheets (MoS2-NS) exhibit a minimum reflection loss of −38.42 dB and a wide bandwidth with effective attenuation (<−10 dB) up to 4.1 GHz at a thickness of 2.4 mm.

scholarly journals Improved impedance matching by multi-componential metal-hybridized rGO toward high performance of microwave absorption

2021 ◽  
Vol 10 (1) ◽  
pp. 1-9
Author(s):  
Jinlong Xie ◽  
Hunan Jiang ◽  
Jinyang Li ◽  
Fei Huang ◽  
Ahsan Zaman ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
High Performance ◽  
Impedance Matching ◽  
Design And Synthesis ◽  
Microwave Absorbing Materials ◽  
Reduced Graphene ◽  
Military Applications ◽  
Absorption Performance ◽  
Microwave Absorption Performance ◽  
Minimum Reflection Loss

Abstract Microwave-absorbing materials with good microwave absorption performance are of great interest for military applications and human health, which is threatened by electromagnetic radiation pollution. Herein, the design and synthesis of multi-componential metal-hybridized graphene composites via freeze drying and pyrolysis of ferrocene hydrazone complex precursor are reported. Various magnetic nanoparticles are loaded on reduced graphene oxide (rGO) via controlling their pyrolysis temperature. The complex electromagnetic parameters of these hybrids are therefore regulated by the hybrid components. Among them, rGO hybridized by the sea-island-like Fe2O3/Fe3O4/FeNi3 multi-componential metals shows a good balance of dielectric and magnetic constants. Thus, the improved impedance matching with free space brings about a superior electromagnetic wave absorption performance, especially on the effective absorption bandwidth. The minimum reflection loss (RL) of the hybrids is as low as −40.3 dB at 11 GHz with the RL bandwidth of −10 dB being 4.55 GHz (from 9.25 to 13.8 GHz).

scholarly journals Excellent microwave absorption properties by tuned electromagnetic parameters in polyaniline-coated Ba0.9La0.1Fe11.9Ni0.1O19/reduced graphene oxide nanocomposites

RSC Advances ◽  
2017 ◽  
Vol 7 (58) ◽  
pp. 36433-36443 ◽  
Author(s):  
Juhua Luo ◽  
Yue Zuo ◽  
Pan Shen ◽  
Zhu Yan ◽  
Kang Zhang
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Microwave Absorption ◽  
Reflection Loss ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
Reduced Graphene ◽  
Absorption Performance ◽  
Microwave Absorption Performance ◽  
Minimum Reflection Loss

The obvious enhancement of microwave absorption performance of Ba0.9La0.1Fe11.9Ni0.1O19/reduced graphene oxide/polyaniline ternary nanocomposites in 2–18 GHz was observed. The minimum reflection loss can reach −49.1 dB with thickness of 1.9 mm.

scholarly journals Effect of Reaction Time on Microwave Absorption Properties of Fe3O4 Hollow Spheres Synthesized via Ostwald Ripening

Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 2921 ◽  
Author(s):  
Wei Huang ◽  
Yujiang Wang ◽  
Shicheng Wei ◽  
Bo Wang ◽  
Yi Liang ◽  
...  
Keyword(s):  
Reaction Time ◽  
Microwave Absorption ◽  
Ostwald Ripening ◽  
Impedance Matching ◽  
Hollow Spheres ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
Magnetic Structures ◽  
Absorption Performance ◽  
Microwave Absorption Performance

Hollow magnetic structures have great potential to be used in the microwave absorbing field. Herein, Fe3O4 hollow spheres with different levels of hollowness were synthesized by the hydrothermal method under Ostwald ripening effect. In addition to their microstructures, the microwave absorption properties of such spheres were investigated. The results show that the grain size and hollowness of Fe3O4 hollow spheres both increase as the reaction time increases. With increasing hollowness, the attenuation ability of electromagnetic wave of Fe3O4 spheres increases first and then decreases, finally increases sharply after the spheres break down. Samples with strong attenuation ability can achieve good impedance matching, which it does preferentially as the absorber thickness increases. Fe3O4 hollow spheres show the best microwave absorption performance when the reaction time is 24 h. The minimum reflection loss (RL (min)) can reach −40 dB, while the thickness is only 3.2 mm.

Constructing Ni12P5/Ni2P Heterostructures to Boost Interfacial Polarization for Enhanced Microwave Absorption Performance

2020 ◽  
Vol 12 (46) ◽  
pp. 52208-52220 ◽  
Author(s):  
Lei-Lei Liang ◽  
Ge Song ◽  
Zhuo Liu ◽  
Jing-Peng Chen ◽  
Li-Jing Xie ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
Interfacial Polarization ◽  
Absorption Performance ◽  
Microwave Absorption Performance

scholarly journals Solvent-Free Synthesis of Ultrafine Tungsten Carbide Nanoparticles-Decorated Carbon Nanosheets for Microwave Absorption

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Yunlong Lian ◽  
Binhua Han ◽  
Dawei Liu ◽  
Yahui Wang ◽  
Honghong Zhao ◽  
...  
Keyword(s):  
Tungsten Carbide ◽  
Microwave Absorption ◽  
Impedance Matching ◽  
Weight Ratio ◽  
Solvent Free ◽  
Carbon Composites ◽  
Carbon Nanosheets ◽  
Solid Mixture ◽  
Absorption Performance ◽  
Microwave Absorption Performance

AbstractCarbides/carbon composites are emerging as a new kind of binary dielectric systems with good microwave absorption performance. Herein, we obtain a series of tungsten carbide/carbon composites through a simple solvent-free strategy, where the solid mixture of dicyandiamide (DCA) and ammonium metatungstate (AM) is employed as the precursor. Ultrafine cubic WC1−x nanoparticles (3–4 nm) are in situ generated and uniformly dispersed on carbon nanosheets. This configuration overcomes some disadvantages of conventional carbides/carbon composites and is greatly helpful for electromagnetic dissipation. It is found that the weight ratio of DCA to AM can regulate chemical composition of these composites, while less impact on the average size of WC1−x nanoparticles. With the increase in carbon nanosheets, the relative complex permittivity and dielectric loss ability are constantly enhanced through conductive loss and polarization relaxation. The different dielectric properties endow these composites with distinguishable attenuation ability and impedance matching. When DCA/AM weight ratio is 6.0, the optimized composite can produce good microwave absorption performance, whose strongest reflection loss intensity reaches up to − 55.6 dB at 17.5 GHz and qualified absorption bandwidth covers 3.6–18.0 GHz by manipulating the thickness from 1.0 to 5.0 mm. Such a performance is superior to many conventional carbides/carbon composites.

Carbon nanofibers supported by FeCo nanocrystals as difunctional magnetic/dielectric composites with broadband microwave absorption performance

2020 ◽  
Vol 824 ◽  
pp. 153980 ◽  
Author(s):  
Yajing Wang ◽  
Yong Sun ◽  
Yan Zong ◽  
Tongguang Zhu ◽  
Linxue Zhang ◽  
...  
Keyword(s):  
Microwave Absorption ◽  
Carbon Nanofibers ◽  
Absorption Performance ◽  
Microwave Absorption Performance ◽  
Magnetic Dielectric
Sign in / Sign up

Export Citation Format

Share Document