scholarly journals Investigating the influence of seating area design and enclosure on the seat-dip effect using scale model measurements

Acta Acustica ◽  
2020 ◽  
Vol 4 (4) ◽  
pp. 15
Author(s):  
Henna Tahvanainen ◽  
Tapio Lokki ◽  
Hyung-Suk Jang ◽  
Jin-Yong Jeon
Keyword(s):  
Low Frequency ◽  
Multiple Source ◽  
Scale Model ◽  
Concert Hall ◽  
Low Frequencies ◽  
Back Rest

The low-frequency attenuation in the direct sound due to the concert hall seats, i.e., the seat-dip effect, is studied with the help of a scale model comprising an adjustable seating area and an enclosed box. More particularly, different seat underpass sizes and floor raking angles are studied, and the results are averaged over multiple source positions. With the measurements on the seating area only, the main seat-dip frequency is found to depend on the seat back rest height, and on the degree of obstruction of the seat underpass. The attenuation bandwidth is found to depend mainly on the floor raking. The differences become less clear when seating area is enclosed by concert hall walls and ceiling because the early reflections from the concert hall geometry compensate the low-frequency attenuation in the direct sound. In addition, the low frequencies below the main seat-dip frequency are found to increase in the presence of unobstructed seat underpasses, and such seats are recommended for the maximal bass response in a concert hall.

scholarly journals Earless toads sense low frequencies but miss the high notes

2017 ◽  
Vol 284 (1864) ◽  
pp. 20171670 ◽  
Author(s):  
Molly C. Womack ◽  
Jakob Christensen-Dalsgaard ◽  
Luis A. Coloma ◽  
Juan C. Chaparro ◽  
Kim L. Hoke
Keyword(s):  
High Frequency ◽  
Species Differences ◽  
Low Frequency ◽  
Auditory Brainstem ◽  
Low Frequencies ◽  
Hearing Sensitivity ◽  
Sensory Pathways ◽  
Airborne Sound ◽  
Vibrational Sensitivity ◽  
Species Specific

Sensory losses or reductions are frequently attributed to relaxed selection. However, anuran species have lost tympanic middle ears many times, despite anurans' use of acoustic communication and the benefit of middle ears for hearing airborne sound. Here we determine whether pre-existing alternative sensory pathways enable anurans lacking tympanic middle ears (termed earless anurans) to hear airborne sound as well as eared species or to better sense vibrations in the environment. We used auditory brainstem recordings to compare hearing and vibrational sensitivity among 10 species (six eared, four earless) within the Neotropical true toad family (Bufonidae). We found that species lacking middle ears are less sensitive to high-frequency sounds, however, low-frequency hearing and vibrational sensitivity are equivalent between eared and earless species. Furthermore, extratympanic hearing sensitivity varies among earless species, highlighting potential species differences in extratympanic hearing mechanisms. We argue that ancestral bufonids may have sufficient extratympanic hearing and vibrational sensitivity such that earless lineages tolerated the loss of high frequency hearing sensitivity by adopting species-specific behavioural strategies to detect conspecifics, predators and prey.

A waveform inversion technique for measuring elastic wave attenuation in cylindrical bars

Geophysics ◽  
1992 ◽  
Vol 57 (6) ◽  
pp. 854-859 ◽  
Author(s):  
Xiao Ming Tang
Keyword(s):  
Elastic Wave ◽  
Wave Attenuation ◽  
Waveform Inversion ◽  
Finite Size ◽  
Low Frequency ◽  
Frequency Range ◽  
Multiple Reflections ◽  
Low Frequencies ◽  
The Time Domain ◽  
Attenuation Values

A new technique for measuring elastic wave attenuation in the frequency range of 10–150 kHz consists of measuring low‐frequency waveforms using two cylindrical bars of the same material but of different lengths. The attenuation is obtained through two steps. In the first, the waveform measured within the shorter bar is propagated to the length of the longer bar, and the distortion of the waveform due to the dispersion effect of the cylindrical waveguide is compensated. The second step is the inversion for the attenuation or Q of the bar material by minimizing the difference between the waveform propagated from the shorter bar and the waveform measured within the longer bar. The waveform inversion is performed in the time domain, and the waveforms can be appropriately truncated to avoid multiple reflections due to the finite size of the (shorter) sample, allowing attenuation to be measured at long wavelengths or low frequencies. The frequency range in which this technique operates fills the gap between the resonant bar measurement (∼10 kHz) and ultrasonic measurement (∼100–1000 kHz). By using the technique, attenuation values in a PVC (a highly attenuative) material and in Sierra White granite were measured in the frequency range of 40–140 kHz. The obtained attenuation values for the two materials are found to be reliable and consistent.

Methods to isolate retrograde and prograde Rayleigh-wave signals

2019 ◽  
Vol 219 (2) ◽  
pp. 975-994 ◽  
Author(s):  
Gabriel Gribler ◽  
T Dylan Mikesell
Keyword(s):  
Rayleigh Wave ◽  
Time Domain ◽  
Fundamental Mode ◽  
Poisson Ratio ◽  
Low Frequency ◽  
Wave Dispersion ◽  
Low Frequencies ◽  
Retrograde Motion ◽  
Mode Identification ◽  
Time Frequency

SUMMARY Estimating shear wave velocity with depth from Rayleigh-wave dispersion data is limited by the accuracy of fundamental and higher mode identification and characterization. In many cases, the fundamental mode signal propagates exclusively in retrograde motion, while higher modes propagate in prograde motion. It has previously been shown that differences in particle motion can be identified with multicomponent recordings and used to separate prograde from retrograde signals. Here we explore the domain of existence of prograde motion of the fundamental mode, arising from a combination of two conditions: (1) a shallow, high-impedance contrast and (2) a high Poisson ratio material. We present solutions to isolate fundamental and higher mode signals using multicomponent recordings. Previously, a time-domain polarity mute was used with limited success due to the overlap in the time domain of fundamental and higher mode signals at low frequencies. We present several new approaches to overcome this low-frequency obstacle, all of which utilize the different particle motions of retrograde and prograde signals. First, the Hilbert transform is used to phase shift one component by 90° prior to summation or subtraction of the other component. This enhances either retrograde or prograde motion and can increase the mode amplitude. Secondly, we present a new time–frequency domain polarity mute to separate retrograde and prograde signals. We demonstrate these methods with synthetic and field data to highlight the improvements to dispersion images and the resulting dispersion curve extraction.

Optimally Sensitive and Efficient Compact Loudspeakers for Low Audio Frequencies

2007 ◽  
Vol 38 (7) ◽  
pp. 11-17
Author(s):  
Ronald M. Aarts
Keyword(s):  
Optimality Criterion ◽  
Low Frequency ◽  
Audio Signal ◽  
Design Procedure ◽  
Frequency Range ◽  
Force Factor ◽  
Low Frequencies ◽  
Limited Frequency ◽  
The Cost ◽  
Higher Sensitivity

Conventionally, the ultimate goal in loudspeaker design has been to obtain a flat frequency response over a specified frequency range. This can be achieved by carefully selecting the main loudspeaker parameters such as the enclosure volume, the cone diameter, the moving mass and the very crucial “force factor”. For loudspeakers in small cabinets the results of this design procedure appear to be quite inefficient, especially at low frequencies. This paper describes a new solution to this problem. It consists of the combination of a highly non-linear preprocessing of the audio signal and the use of a so called low-force-factor loudspeaker. This combination yields a strongly increased efficiency, at least over a limited frequency range, at the cost of a somewhat altered sound quality. An analytically tractable optimality criterion has been defined and has been verified by the design of an experimental loudspeaker. This has a much higher efficiency and a higher sensitivity than current low-frequency loudspeakers, while its cabinet can be much smaller.

An Analytical Model for the Interaction of Mass Inclusions in Heterogeneous (HG) Blankets

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
A. Wagner ◽  
M. E. Johnson ◽  
K. Idrisi ◽  
D. P. Bartylla
Keyword(s):  
Elastic Layer ◽  
Analytical Approach ◽  
Low Frequency ◽  
Control Device ◽  
Effective Stiffness ◽  
Special Focus ◽  
Dynamic Vibration Absorber ◽  
Low Frequencies ◽  
Dynamic Vibration ◽  
The Masses

The heterogeneous (HG) blanket is a passive treatment used to reduce the low frequency transmission of sound through partitions. HG blankets, glued onto a structure, consist of an elastic medium with embedded mass inhomogeneities that mechanically replicate a mass-spring-damper system to reduce efficient radiating structural modes at low frequencies. The elastic layer typically used has sound absorption properties to create a noise control device with a wide bandwidth of performance. The natural frequency of an embedded dynamic vibration absorber is determined by the mass of the inhomogeneity as well as by its effective stiffness due to the interaction of the mass inclusion with the elastic layer. A novel analytical approach has been developed to describe in detail the interaction of the mass inclusions with the elastic layer and the interaction between the masses by evaluating special elastomechanical concepts. The effective stiffness is predicted by the analytical approach based on the shape of the mass inclusions as well as on the thickness and material properties of the layer. The experimental validation is included and a simplified direct equation to calculate the effective stiffness of a HG blanket is proposed. Furthermore, the stress field inside the elastic material will be evaluated with focus on the stresses at the base to assess the modeling of one or more masses placed on top of the elastic layer as dynamic vibration absorbers. Finally, the interaction between two (or more) masses placed onto the same layer is studied with special focus on the coupling of the masses at low distances between them.

Measurement of Dynamic Strain

1943 ◽  
Vol 10 (2) ◽  
pp. A85-A92
Author(s):  
C. O. Dohrenwend ◽  
W. R. Mehaffey
Keyword(s):  
High Speed ◽  
Shock Loading ◽  
Low Frequency ◽  
Dynamic Strain ◽  
Time Axis ◽  
Low Frequencies ◽  
Strain Measurements ◽  
Moving Vehicles ◽  
Machine Parts ◽  
Dynamic Strains

Abstract The measurement of dynamic strains of both high and low frequency give rise to a variety of problems in instrumentation. Two types of equipment and circuits designed and used by the authors are discussed in detail. The first type based on the amplitude-modulated method is for low frequencies from zero to about 15 per cent of the carrier frequency of 1025 cycles per sec. The equipment has application to strain measurements varying from static values to those produced in moving vehicles, various machine parts, structures such as crane bridges, in fact all strain measurements where the frequency is 150 cycles per sec or less. The second type of equipment discussed is a potentiometer type and is for high-frequency strain measurements from 100 cycles per sec to 8000 cycles per sec. This high-speed equipment is conveniently used for impact strain, such as produced in hammer blows, shock loading, forging equipment, and impact-factor determination. Both units are designed to be used with a cathode-ray oscillograph which lends itself to a variety of recording methods. The methods discussed include both the type where the time axis is obtained by sweeping the oscilloscope beam on a stationary film and where the time axis is obtained mechanically.

Study on bearing structure and joint seismic resistance of large span non-landing arch on high-speed railway station

2019 ◽  
Author(s):  
Liu Chuanping ◽  
Tianluan Liu ◽  
Jian Jia
Keyword(s):  
High Speed ◽  
Low Frequency ◽  
Large Earthquake ◽  
Scale Model ◽  
Railway Station ◽  
High Speed Railway ◽  
Long Span ◽  
Weak Component ◽  
Double Beam ◽  
Cyclic Loading Tests

<p>The main entrance of Chongqing West Railway Station adopts the non-landing compound arch with a span of 108m. In this paper, the nonlinear finite element theory is applied to analyze the bearing capacity and seismic ductility of the compound arch joints. Low frequency cyclic loading tests are performed on the 1/5 scale model. Based on the calculation and test results, a double beam structure and a section of steel truss are placed in the arch joints to bear the force of the arch. Moreover, the buckling-restrained brace (BRB) is placed in the lower part of the arch that enables most force directly transmit to the foundation of the arch. Unlike BRB’s common use as an inter-column support, it now acts as a buckling constraint support in the large earthquake. For instance, it can be yielded before the frame column to improve earthquake resistance. The research results indicate that the compound arch joint structure successfully accomplishes the seismic design goals of strong joints with weak component. Moreover, the study provides the theoretical basis and design reference for the application of BRB and long-span arch structures in high-speed railway station.</p>

Preamplifier With Ultra Low Frequency Cutoff for Infrasonic Condenser Microphone

2012 ◽  
Author(s):  
Rasmus Trock Kinnerup ◽  
Arnold Knott ◽  
Ole Cornelius Thomsen ◽  
Kresten Marbjerg ◽  
Per Rasmussen
Keyword(s):  
Input Impedance ◽  
Dynamic Range ◽  
Cutoff Frequency ◽  
Low Frequency ◽  
Input Resistance ◽  
Bias Current ◽  
Microphone Signal ◽  
Low Frequencies ◽  
Pass Filter ◽  
Condenser Microphone

Measuring infrasonic sound sets high requirements on the instruments used. Typically the measurement chain consists of a microphone and a preamplifier. As the input resistance of the preamplifier forms a high pass filter with the capacitance of the microphone in the picofarad range, measuring ultra low frequencies becomes a challenge. The electric preamplifier presented in this paper together with a prepolarized condenser microphone form a measurement system. The developed preamplifier connects the microphone signal directly to the input of an operational amplifier with ultra high input impedance. The bias current for the preamplifier further complicates the signal amplification. A configuration of two diode-connected FETs provide the input bias current. The resulting input impedance of nearly 1 TΩ yields a total lower limiting −3 dB cutoff frequency of 8 mHz and a dynamic range of 95 dB. Being able to measure down to ultra low frequencies in the infrasonic frequency range will aid actors in the debate on wind turbine noise. Sonic booms from supersonic flights include frequencies down to 10 mHz and the preamplifier proposed in this paper will aid scientists trying to modify the N-shaped shock wave at high level which prohibits flights in land zones.

Effects on Pipe Vibrations of Cavitation in an Orifice and in Globe-Style Valves

2006 ◽  
Author(s):  
Se´bastien Caillaud ◽  
Rene´-Jean Gibert ◽  
Pierre Moussou ◽  
Joe¨l Cohen ◽  
Fabien Millet
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Low Frequency ◽  
Flow Regimes ◽  
Piping System ◽  
Low Frequencies ◽  
Choked Flow ◽  
Single Hole ◽  
Piping Systems ◽  
Large Amplitude Vibrations

A piping system of French nuclear power plants displays large amplitude vibrations in particular flow regimes. These troubles are attributed to cavitation generated by single-hole orifices in depressurized flow regimes. Real scale experiments on high pressure test rigs and on-site tests are then conducted to explain the observed phenomenon and to find a solution to reduce pipe vibrations. The first objective of the present paper is to analyze cavitation-induced vibrations in the single-hole orifice. It is then shown that the orifice operates in choked flow with supercavitation, which is characterized by a large unstable vapor pocket. One way to reduce pipe vibrations consists in suppressing the orifices and in modifying the control valves. Three technologies involving a standard trim and anti-cavitation trims are tested. The second objective of the paper is to analyze cavitation-induced vibrations in globe-style valves. Cavitating valves operate in choked flow as the orifice. Nevertheless, no vapor pocket appears inside the pipe and no unstable phenomenon is observed. The comparison with an anti-cavitation solution shows that cavitation reduction has no impact on low frequency excitation. The effect of cavitation reduction on pipe vibrations, which involve essentially low frequencies, is then limited and the first solution, which is the standard globe-style valve installed on-site, leads to acceptable pipe vibrations. Finally, this case study may have consequences on the design of piping systems. First, cavitation in orifices must be limited. Choked flow in orifices may lead to supercavitation, which is here a damaging and unstable phenomenon. The second conclusion is that the reduction of cavitation in globe-style valve in choked flow does not reduce pipe vibrations. The issue is then to limit cavitation erosion of valve trims.

Frequency-Weighted Variable-Length Controllers Using Anytime Control Strategies

2011 ◽  
Author(s):  
Gundula B. Runge ◽  
Al Ferri ◽  
Bonnie Ferri
Keyword(s):  
Time Scale ◽  
Weighting Function ◽  
Control Strategies ◽  
Low Frequency ◽  
Low Frequencies ◽  
High Frequencies ◽  
Frequency Components ◽  
Computational Resources ◽  
Weighted Variable ◽  
Selection Of

This paper considers an anytime strategy to implement controllers that react to changing computational resources. The anytime controllers developed in this paper are suitable for cases when the time scale of switching is in the order of the task execution time, that is, on the time scale found commonly with sporadically missed deadlines. This paper extends the prior work by developing frequency-weighted anytime controllers. The selection of the weighting function is driven by the expectation of the situations that would require anytime operation. For example, if the anytime operation is due to occasional and isolated missed deadlines, then the weighting on high frequencies should be larger than that for low frequencies. Low frequency components will have a smaller change over one sample time, so failing to update these components for one sample period will have less effect than with the high frequency components. An example will be included that applies the anytime control strategy to a model of a DC motor with deadzone and saturation nonlinearities.

Sign in / Sign up

Export Citation Format

Share Document