scholarly journals Evaluation of mechanical properties of berries on resistant or tolerant varieties of grapevine

2019 ◽  
Vol 13 ◽  
pp. 01005 ◽  
Author(s):  
Duilio Porro ◽  
Marco Wolf ◽  
Stefano Pedò
Keyword(s):  
Mechanical Properties ◽  
Qualitative Data ◽  
Plant Protection ◽  
Point Of View ◽  
Skin Thickness ◽  
Experimental Site ◽  
Berry Skin ◽  
Texture Analyzer ◽  
North Eastern ◽  
Grape Varieties

An experimental site located in Trentino (North-Eastern Italy), characterized by considerable rainfall that normally requires several plant protection treatments, was used to assess the behavior of 15 grape varieties resistant to the main fungal diseases from an agronomic, quantitative, qualitative, nutritional, and physiological point of view, since 2015. At the 4th year of planting (2016), mechanical properties (berry firmness, berry skin hardness, and thickness) of berries were evaluated using a TAxT2i Texture Analyzer in order to get information about parameters useful for wine process. The varieties showed significant differences in the studied parameters. Regent had the highest values of berry firmness, whilst Johanniter and Cabino the lowest. Cabernet Cantor and Cabernet Cortis generally presented higher values of berry skin hardness than the other varieties. Conversely, the lowest values of skin hardness were recorded in Johanniter, followed by both Solaris and Cabino. Souvignier gris, Prior, and Bronner had significantly higher values of berry skin thickness than Cabino, which, in turn, did not differ from the levels found in Helios, Muscaris, Aromera, and Regent berries, with values above 175 µm, range largely found in grapevine cultivars normally grown. The association between mechanical properties of berries and qualitative data could be used as an aid in decision-making about wine processes.

scholarly journals A Major QTL is associated with berry grape texture characteristics

OENO One ◽  
2021 ◽  
Vol 55 (1) ◽  
pp. 183-206
Author(s):  
Manna Crespan ◽  
Daniele Migliaro ◽  
Silvia Vezzulli ◽  
Sara Zenoni ◽  
Giovanni Battista Tornielli ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Skin Resistance ◽  
Quality Parameters ◽  
Skin Thickness ◽  
Berry Skin ◽  
Texture Parameters ◽  
Texture Characteristics ◽  
Main Gene ◽  
Available Information ◽  
Major Qtl

Berry texture and berry skin mechanical properties are traits with high agronomic relevance because they are related to quality parameters and marketing requirements of wine, table, and raisin grapes. Searching for QTLs linked to berry texture, an F1 population of 152 individuals and their parents were used in this study. These F1 plants were obtained crossing Raboso Veronese, a seeded black wine grape cultivar, and Sultanina, a seedless white grape variety, especially used for raisins. Density flotation was applied for berry sorting improving the management of many and highly variable genotypes, irrespective of the quantification of specific molecule classes. Berries were evaluated for technological ripeness parameters and mechanical properties. Texture parameters were taken as raw data and as data normalised on berry dimensions, i.e., berry diameter or surface or volume. SSR molecular markers were used to produce a genetic map and a major QTL for berry texture was found on chromosome 18 with traits related to berry firmness showing a phenotypical explained variance higher than 60 %, and traits related to berry resilience, springiness and cohesiveness showing a variance higher than 50 %. Surprisingly, this QTL showed to be associated with SSR markers linked to VviAGL11, the main gene linked to seedlessness. VviAGL11 expression and co-expression profiling during grape ripening was evaluated using available information; this data suggested a role for this gene on the texture of a ripe berry.List of Abbreviations:ABW, average berry weightBR, berry resilienceBR_diam, berry resilience normalised on berry diameterBR_sur, berry resilience normalised on berry surfaceBR_vol, berry resilience normalised on berry volumeBS_ratio, berry springinessBS_ratio_diam, berry springiness normalised on berry diameterBS_ratio_sur, berry springiness normalised on berry surfaceBS_ratio_vol, berry springiness normalised on berry volumeBCo, berry cohesivenessBCo_diam, berry cohesiveness normalised on berry diameterBCo_sur, berry cohesiveness normalised on berry surfaceBCo_vol, berry cohesiveness normalised on berry volumeBH, berry hardnessBH_diam, berry hardness normalised on berry diameterBH_sur, berry hardness normalised on berry surfaceBH_vol, berry hardness normalised on berry volumeBG, berry gumminessBG_diam, berry gumminess normalised on berry diameterBG_sur, berry gumminess normalised on berry surfaceBG_vol, berry gumminess normalised on berry volumeBCh_ratio, berry chewinessBCh_ratio_diam, berry chewiness normalised on berry diameterBCh_ratio_sur, berry chewiness normalised on berry surfaceBCh_ratio_vol, berry chewiness normalised on berry volumeFsk, berry skin break forceWsk, berry skin break energyEsk, berry skin resistance to the axial deformationSpsk, berry skin thickness

An Integrated Tourism Model based on Local Identity for Ecological, Historical, and Cultural Tourism

2018 ◽  
Vol 3 (7) ◽  
Author(s):  
Natapon Anusorntharangkul ◽  
Yanin Rugwongwan
Keyword(s):  
Environmental Design ◽  
Cultural Tourism ◽  
Marketing Strategies ◽  
Point Of View ◽  
Local Identity ◽  
Design Elements ◽  
Resources Management ◽  
The North ◽  
North Eastern

The objective of this paper is to study local identity and explore the potential for regional resources management and valuation of the historic environment a case study of the north-eastern provinces of Thailand, for guiding the tourism environmental design elements. The point of view has the goal creative integrate tourism model and product development from local identity embedded localism. This concept advocates the philosophy that tourism businesses must develop products and marketing strategies that not only address the needs of consumers but also safeguard the local identity. 

Rheology of hydrocarbon gels

1950 ◽  
Vol 200 (1061) ◽  
pp. 183-188 ◽  
Keyword(s):  
Mechanical Properties ◽  
Experimental Measurement ◽  
Theoretical Basis ◽  
Continuous Media ◽  
Point Of View ◽  
Coarse Grained ◽  
Testing Instrument ◽  
Fine Grained ◽  
Mineral Oils ◽  
Space And Time

Hydrocarbon gels contain a number of materials, such as rubber, greases, saponified mineral oils, etc., of great interest for various engineering purposes. Specific requirements in mechanical properties have been met by producing gels in appropriately chosen patterns of constituent components of visible, colloidal, molecular and atomic sizes, ranging from coarse-grained aggregates, represented by sponges, foams, emulsions, etc.; to fine-grained and apparently homogeneous ones, represented by optically clear compounds. The engineer who has to deal with the whole range of such materials will adopt a macroscopic point of view, based on an apparent continuity of all the material structures and of the distributions in space and time of the displacements and forces occurring under mechanical actions. It has been possible to determine these distributions in the framework of a comprehensive scheme in which the fundamental principles of the mechanics of continuous media provide the theoretical basis, and a testing instrument of new design, termed Rheogoniometer, the means of experimental measurement (Weissenberg 1931, 1934, 1946, 1947, 1948).

Mechanical Properties of Fired-Clay Brick Masonry Models in Moist and Dry Conditions

2014 ◽  
Vol 624 ◽  
pp. 307-312 ◽  
Author(s):  
Cristina Gentilini ◽  
Elisa Franzoni ◽  
Gabriela Graziani ◽  
Simone Bandini
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Point Of View ◽  
Shear Behaviour ◽  
Masonry Buildings ◽  
Masonry Structures ◽  
Clay Brick ◽  
Clay Bricks ◽  
Dry Conditions ◽  
Rising Damp

Rising damp is one of the main issues affecting masonry buildings. However, its consequences on the mechanical performance of masonry structures are not so largely explored. In this paper, the compressive and shear behaviour of masonry triplets, manufactured with solid fired-clay bricks and cement-based mortar, is investigated in dry and moist conditions. The results are interpreted on the basis of the features of the single materials, from both a mechanical and microstructural point of view.

THREE-DIMENSIONAL COSSERAT CONTINUUM MODELING OF FRACTURED ROCK MASSES

2010 ◽  
Vol 02 (03n04) ◽  
pp. 217-234
Author(s):  
IOANNIS STEFANOU ◽  
JEAN SULEM
Keyword(s):  
Mechanical Properties ◽  
Discrete System ◽  
Degrees Of Freedom ◽  
Fractured Rock ◽  
Three Dimensional ◽  
Cosserat Continuum ◽  
Point Of View ◽  
Rock Masses ◽  
Homogenization Technique ◽  
Rock Structure

The behavior of rock masses is influenced by the existence of discontinuities, which divide the rock in joint blocks making it an inhomogeneous anisotropic material. From the mechanical point of view, the geometrical and mechanical properties of the rock discontinuities define the mechanical properties of the rock structure. In the present paper we consider a rock mass with three joint sets of different dip angle, dip direction, spacing and mechanical properties. The dynamic behavior of the discrete system is then described by a continuum model, which is derived by homogenization. The homogenization technique applied here is called generalized differential expansion homogenization technique and has its roots in Germain's (1973) formulation for micromorphic continua. The main advantage of the method is the avoidance of the averaging of the kinematic quotients and the derivation of a continuum that maps exactly the degrees of freedom of the discrete system through a one-to-one correspondence of the kinematic measures. The derivation of the equivalent continuum is based on the identification for any virtual kinematic field of the power of the internal forces and of the kinetic energy of the continuum with the corresponding quantities of the discrete system. The result is an anisotropic three-dimensional Cosserat continuum.

Behaviors of Xiashu Loess in the Lower Reaches of China’s Yangtze River under Triaxial Compression and the Microscopic Explanations

2016 ◽  
Vol 858 ◽  
pp. 91-97
Author(s):  
Jun Hua Xiao ◽  
Wen Qi Zheng
Keyword(s):  
Mechanical Properties ◽  
Yangtze River ◽  
Shear Failure ◽  
Triaxial Compression ◽  
Processing Technique ◽  
Point Of View ◽  
Image Processing Technique ◽  
Test Results ◽  
Compression Tests ◽  
Triaxial Compression Tests

To investigate the macroscopic mechanical properties of undisturbed structural Xiashu loess in the lower reaches of China’s Yangtze River under triaxial compression, and obtain the intrinsic explanations for the macroscopic mechanical properties from the microscopic point of view, in laboratory, triaxial compression tests were carried out, microstructure images of sheared samples were collected by scanning electron microscope (SEM), and quantitative parameters of microstructure (mainly about particle or pore size, distribution, and alignment) were extracted by digital image processing technique. Based on the test results, the deviator stress-strain relationships of both undisturbed and remoulded Xiashu loess, the structural strength, and the microstructural evolution mechanism about the formation of shear failure zone of Xiashu loess under triaxial compression were analyzed.

Roughness and fractality of fracture surfaces as indicators of mechanical quantities of porous solids

Open Physics ◽  
2011 ◽  
Vol 9 (6) ◽  
Author(s):  
Tomáš Ficker ◽  
Dalibor Martišek
Keyword(s):  
Mechanical Properties ◽  
Fractal Dimension ◽  
Fractal Dimensions ◽  
Point Of View ◽  
Porous Solids ◽  
Surface Parameter ◽  
Cement Pastes ◽  
Fracture Surfaces ◽  
Profile Parameter ◽  
3D Profile

AbstractThe 3D profile surface parameter H q and fractal dimension D were tested as indicators of mechanical properties inferred from fracture surfaces of porous solids. High porous hydrated cement pastes were used as prototypes of porous materials. Both the profile parameter H q and the fractal dimension D showed capability to assess compressive strength from the fracture surfaces of hydrated pastes. From a practical point of view the 3D profile parameter H q seems to be more convenient as an indicator of mechanical properties, as its values suffer much less from statistical scatter than those of fractal dimensions.

PERBEDAAN TINGKAT AGRESIVITAS PADA SISWA SMU MUHI YOGYAKARTA BERDASAR POLA ASUH DAN JENIS PEKERJAAN ORANG TUA

2013 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Hanif Cahyo Adi Kistoro
Keyword(s):  
High School ◽  
Aggressive Behaviour ◽  
Quantitative Data ◽  
Qualitative Data ◽  
Data Gathering ◽  
Civil Servant ◽  
Senior High School ◽  
Point Of View ◽  
Significant Difference ◽  
The Difference

This research aims at examining the difference of aggressiveness in students Senior High School of First Muhammedan (SMU MUHI) Yogyakarta from parent’s rearings and parent’s jobs. It based on phenomenons, such  increase of fights along students, behaviors of students less polite to teachers, and others, especially that occurs in Yogyakarta. It indicated of aggressive behaviour. It may be caused of not right of parent’s rearings, and parent’s rearings has correlation with parent’s jobs. From these phenomenons, reseacher want to investigated about difference of aggressiveness in students Senior High School of First Muhammedan from parent’s rearings (authoritarian, democratic, and permissive) and from parent’s jobs (entrepreneur, official civil servant/PNS, and military) point of view to aggressiveness. Two hypotheses tested are as follows: (a) that there is a difference of agressiveness in students Senior High School of First Muhammedan (SMU MUHI) have parents tendency to authoritatif, democratic, and permissive, and b) that there is a difference of agressiveness in students Senior High School of First Muhammedan (SMU MUHI) have parents as entrepreneur, official civil servant, and military. Subjects of the research include seventy six students of first class and sixty seven students of second class in Senior High School of First Muhammedan (SMU MUHI), Yogyakarta and their parents, totally is one hundred and sixty person. The two instruments administered in data gathering (quantitative data) include parent’s rearings scale for students’ parent (within there was a identity of parent’s job), agressiveness scale for students, and interview (qualitative data). Variance analysis 2-stripes (Anava 2-jalur) were applied to analyze the data. The outcome shows the following: (a) there is a significant difference of three parent’s rearings to bring about aggressiveness with F=366.479, standar error p=0.000, and difference average is: authoritarian=69.344; democratic=79.283; permissive=87.862. (b) there is not a significant difference of three parent’s jobs to bring about aggressiveness with F=0.054, standar error p=0.583, and difference  average is: entrepreneur=77.632; official civil servant=76.436; military=76.960. From the result of parent’s rearings appeared that permissive is the most influential from all (authoritarian and democratic) to bring about aggressiveness in students of Senior High School of First Muhhammedan, Yogyakarta, and parent’s rearings hasn’t influence to bring about children’s aggressiveness.

Entropy of Nanostructures

2017 ◽  
pp. 600-614
Author(s):  
Ottorino Ori ◽  
Franco Cataldo ◽  
Mihai V. Putz
Keyword(s):  
Mechanical Properties ◽  
Free Energy ◽  
Gibbs Free Energy ◽  
Defect Formation ◽  
Vacancy Concentration ◽  
Structural Evolution ◽  
Point Of View ◽  
Structural Defects ◽  
Formation Mechanisms ◽  
Topological Invariants

Recent advances in graphene studies deal with the influence of structural defects on graphene chemical, electrical, magnetic and mechanical properties. Here the complex mechanisms leading to the formation of clusters of vacancies in 2D honeycomb HD lattices are described by a pure topological point of view, aiming to correlate the variation of specific topological invariants, sensible to vacancy concentration, to the structural evolution of the defective networks driven by the topo-thermodynamical Gibbs free energy. Interesting predictions on defect formation mechanisms add details on the topological mechanisms featured by the graphenic structures with defects. Future roles of bondonic particles in defective HD materials are also envisaged.

High Performance Fine Grained Concrete with Content of Pumice

2020 ◽  
Vol 309 ◽  
pp. 21-25
Author(s):  
Vlastimil Bilek ◽  
Michal Pešata ◽  
Lukáš Procházka
Keyword(s):  
Mechanical Properties ◽  
Volcanic Rock ◽  
High Performance ◽  
Volcanic Glass ◽  
Volume Density ◽  
Point Of View ◽  
Fine Grained ◽  
Low Volume ◽  
Small Elements ◽  
High Absorption

Pumice is a volcanic rock that consists of a highly vesicular rough textured volcanic glass. It is very porous and shows a high absorption - it can contain a lot of water. Thanks to its low volume density, it is sometimes used as a light natural aggregate, especially for some small elements such as chimney blocks. The paper is focused on the development of concretes and mortars for these purposes. The optimum content of pumice was specified from the point of view of mechanical properties. Special attention was paid to absorbed water - it can be a source of self-curing of concrete.

Sign in / Sign up

Export Citation Format

Share Document