scholarly journals Study on support optimization of coal roadway with soft and broken surrounding rock

2020 ◽  
Vol 165 ◽  
pp. 03037
Author(s):  
Li Li
Keyword(s):  
Field Investigation ◽  
Surrounding Rock ◽  
Mine Pressure ◽  
Deformation And Failure ◽  
Mining Depth ◽  
Coal Roadway ◽  
Geological Conditions ◽  
Support Optimization ◽  
Optimization Schemes

With the increase of mining depth, the geological conditions tend to be complex. The problems of high mine pressure and soft and broken surrounding rock are more serious, and the difficulty of support is significantly increased. In this paper, the coal roadway with soft and broken surrounding rock in Shuangliu coal mine was taken as the research object, the model was established by FLAC3D software, the deformation and failure characteristics of the surrounding rock of the roadway were studied, the distribution of the stress and plastic area of the roadway were analyzed, and the problems of the original support scheme were analyzed. Combined with the field investigation and analysis, a variety of optimization schemes were proposed, and the optimal support scheme was obtained through modelling and calculation. The results show that the sidewall and corner of coal roadway are the key parts of support, and strengthening its support strength is conducive to improving the overall stability of the roadway. W-type steel band can be used to connect the rock bolt and anchor cable together to play the role of coupling support, so as to achieve the overall support effect.

Study on the Truss Support Technology for Coal Side in a Soft Broken Coal Roadway Under High Stress

2012 ◽  
Vol 524-527 ◽  
pp. 360-363
Author(s):  
Shou Yi Dong ◽  
Qi Tao Duan ◽  
Fu Lian He ◽  
Qi Li ◽  
Hong Jun Jiang
Keyword(s):  
Production Condition ◽  
High Stress ◽  
Field Investigation ◽  
Surrounding Rock ◽  
Theory Analysis ◽  
Large Section ◽  
Cable Channel ◽  
Coal Roadway ◽  
Measurement Results ◽  
Steel Truss

The coal side deformation and sliding can not be effectively controlled by use of the traditional bolt or cable support in the high stress crushed surrounding rock and large section roadway. For solving this problem, the new prestressed truss support technology is put forward, and its supporting principles of roof and two walls are stated. The mechanical model of cable-channel steel truss is established, and then the tensile strength of the cable and the maximum deflection of the channel steel are derived. By way of field investigation, mechanics theory analysis and actual production condition, the scheme is defined and applied in the replacement roadway. Measurement results of surrounding rock behavior show that the coal side displacement is no more than 254mm and the roof convergence is less than 172mm. Apparent economic and technical profits have been achieved.

scholarly journals An Experimental Research on Surrounding Rock Unloading during Solid Coal Roadway Excavation

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Hongjun Guo ◽  
Ming Ji ◽  
Dapeng Liu ◽  
Mengxi Liu ◽  
Gaofeng Li ◽  
...  
Keyword(s):  
Energy Storage ◽  
Deformation Energy ◽  
Surrounding Rock ◽  
Dissipated Energy ◽  
Rock Stress ◽  
Deformation And Failure ◽  
Coal Roadway ◽  
Solid Coal ◽  
Unloading Rate ◽  
Surrounding Rock Stress

In order to further explore the deformation and failure essence of the deep coal body, based on the characteristics of surrounding rock stress adjustment before and after solid coal roadway excavation, an experiment of unloading confining pressure and loading axial pressure of the coal body was designed and conducted in this study. Based on test results, the failure mechanics and energy characteristics of the coal body were analyzed through experiments. Rapid unloading is considered a key factor contributing to lateral deformation and expansion failure, which exacerbates the deterioration of coal body and reduces the deformation energy storage capacity of coal. On the other hand, the larger loading rate tends to shorten the accumulation time of microcracks and cause damage to the coal body, resulting in strengthening the coal body and improving energy storage. Under the circumstance that the coal body is destroyed, the conversion rates of the internal deformation energy and dissipated energy are more significantly affected by unloading rate. The increasing unloading rate and rapid decreases in the conversion rate of deformation energy make the coal body more vulnerable to damage. Under the same stress conditions, the excavation unloading is more likely to deform, destroy, or even throw the coal than the experiment unloading. In order to reduce or avoid the occurrence of deep roadway excavation accidents, the understanding of the excavation unloading including possible influencing factors and the monitoring of the surrounding rock stress and energy during the excavation disturbance should be strengthened. It can be used as the basis for studying the mechanism of deformation and failure of coal and rock and dynamic disasters in deep mines, as well as the prediction, early warning, prevention, and control of related dynamic disasters.

scholarly journals Key Factors Affecting the Deformation and Failure of Surrounding Rock Masses in Large-Scale Underground Powerhouses

2020 ◽  
Vol 2020 ◽  
pp. 1-20
Author(s):  
Meng Wang ◽  
Jia-wen Zhou ◽  
An-chi Shi ◽  
Jin-qi Han ◽  
Hai-bo Li
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Surrounding Rock ◽  
Rock Masses ◽  
Affecting Factors ◽  
Key Factors ◽  
Underground Powerhouse ◽  
Deformation And Failure ◽  
Factors Affecting ◽  
Geological Conditions

The stability of the surrounding rock masses of underground powerhouses is always emphasized during the construction period. With the general trends toward large-scale, complex geological conditions and the rapid construction progress of underground powerhouses, deformation and failure issues of the surrounding rock mass can emerge, putting the safety of construction and operation in jeopardy and causing enormous economic loss. To solve these problems, an understanding of the origins and key affecting factors is required. Based on domestic large-scale underground powerhouse cases in the past two decades, key factors affecting the deformation and failure of the surrounding rock mass are summarized in this paper. Among these factors, the two most fundamental factors are the rock mass properties and in situ stress, which impart tremendous impacts on surrounding rock mass stability in a number of cases. Excavation is a prerequisite of surrounding rock mass failure and support that is classified as part of the construction process and plays a pivotal role in preventing and arresting deformation and failure. Additionally, the layout and structure of the powerhouse are consequential. The interrelation and interaction of these factors are discussed at the end of this paper. The results can hopefully advance the understanding of the deformation and failure of surrounding rock masses and provide a reference for design and construction with respect to hydroelectric underground powerhouses.

scholarly journals The method for determining working resistance of advance support bracket in deep fully mechanized roadway based on Flac3D

2018 ◽  
Vol 10 (6) ◽  
pp. 168781401878362 ◽  
Author(s):  
Guanghui Xue ◽  
Jijie Cheng ◽  
Jian Guan ◽  
Jingxuan Chai ◽  
Guofeng Zhang ◽  
...  
Keyword(s):  
Coupling Model ◽  
Surrounding Rock ◽  
Numerical Calculations ◽  
Stress And Strain ◽  
Determination Method ◽  
Mechanical Coupling ◽  
Mining Depth ◽  
Geological Conditions ◽  
Working Principle ◽  
Working Resistance

Fully mechanized roadway is an area of high accident incidence, and the problem is more prominent with the increase of mining depth of coal resources. The advance support scheme put forward for fully mechanized mining roadway with self-moving support and anchor combined unit, and the configuration and working principle of support robot was explicated. A determination method on the working resistance of advance support bracket was proposed based on mechanical coupling model of surrounding rock-advance support brackets. Taking the geological conditions of the Qishan mine as an example, the process of analyzing and determining the working resistance of the advance support bracket was described using this method. An advance support bracket was designed using SolidWorks, and the working load was obtained based on numerical calculations. Then the stress and strain were analyzed using ANSYS. The results showed that the designed advance support bracket can withstand the corresponding top plate pressure. It provides a new method and thought for study and development of advance supporting equipment in deep fully mechanized roadway.

scholarly journals Research on Control Mechanism of Surrounding Rock of Deep Gob-Side Entry Retaining

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jianxiong Liu ◽  
Jingke Wu ◽  
Yun Dong ◽  
Yanyan Gao ◽  
Jihua Zhang ◽  
...  
Keyword(s):  
Large Deformation ◽  
High Stress ◽  
Original System ◽  
Field Investigation ◽  
Surrounding Rock ◽  
Eccentric Load ◽  
Deformation And Failure ◽  
Body Fracture ◽  
Stress States ◽  
Term Creep

To address the large deformation of the surrounding rock of deep gob-side entry retaining under high stress, lithological characteristics of the surrounding rock and failure model of support body and their evolutionary processes are analyzed through field investigation and theoretical analysis. Failure mechanisms of surrounding rock and the technology to control it are studied systematically. The results show that the causes of the large deformation of the surrounding rock are weak thick mudstones with softening property and water absorption behavior, as well as its fragmentation, dilatancy, and long-term creep during strong disturbance and highly centralized stress states. The cross-section shape of the roadway after deformation and failure of the surrounding rock is obviously asymmetric in both the horizontal and vertical directions. Since the original system supporting the surrounding rock is unable to completely bear the load, each part of the supporting system is destroyed one after the other. The failure sequences of the surrounding rock are as follows: (1) roadway roof fracture in the filling area, (2) filling body fracture under eccentric load, (3) rapid subsidence of the roadway roof, and (4) external crack drum and rib spalling at the solid coal side. Due to this failure sequence, the entire surrounding rock becomes unstable. A partitioned coupling support and a quaternity control technology to support the surrounding rock are proposed, in which the roof of the filling area plays a key role. The technology can improve the overall stability of gob-side entry retaining, prevent support structure instability caused by local failure of the surrounding rock, and ensure the safety and smoothness of roadways.

scholarly journals Analysis of pressure relief and outburst prevention effect and mining depth effect of floor roadway in single serious outburst coal seam

2021 ◽  
Vol 267 ◽  
pp. 01051
Author(s):  
Guohong Chen
Keyword(s):  
Coal Seam ◽  
Field Test ◽  
Surrounding Rock ◽  
Test Results ◽  
Pressure Relief ◽  
Depth Effect ◽  
Mining Depth ◽  
Geological Conditions ◽  
Ground Stress ◽  
Outburst Coal Seam

In order to solve the serious problem of single serious outburst coal seam gas disaster, based on the gas geological conditions of Jiangxi Fengcheng Qujiang company, theoretical analysis, numerical simulation, field test and other comprehensive research methods were used to analyze the partition fracture law of roadway surrounding rock under different mining depth conditions. The results show that: under the conditions of high ground stress, high temperature and other environmental conditions, the radius of pressure relief loose circle of surrounding rock of roadway is significantly increased, and it is significantly larger than that of shallow part. In the deep area of - 800m elevation, the distance between floor roadway and coal seam is optimized to be 12 ~ 15m. The field test results show that the original permeability coefficient of overlying coal seam of floor roadway increases by 55.74 times, and the pressure relief effect is good.

scholarly journals Deformation and Failure Characteristics and Control Technology of Roadway Surrounding Rock in Deep Coal Mines

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-15 ◽  
Author(s):  
Jucai Chang ◽  
Dong Li ◽  
Tengfei Xie ◽  
Wenbao Shi ◽  
Kai He
Keyword(s):  
High Stress ◽  
Development Stage ◽  
Surrounding Rock ◽  
Deformation And Failure ◽  
Deformation Stage ◽  
Mining Depth ◽  
Floor Heave ◽  
Rock Tunnel ◽  
Two Sides

With the increase in mining depth, the problem of the floor heave of a roadway is becoming increasingly prominent. Solving this problem for a deep high-stress roadway is the key to ensure safe supply and utilization of coal resources in China. This study investigates the floor heave of a horizontal transportation rock roadway at the depth of 960 m at the Xieyi Mine. A four-way loading simulation test frame similar to the Xieyi Mine was used to reproduce the high-stress environment of a deep roadway by loading different pressures on the roof, floor, and two sides of the roadway. The experimental results show that after the tunnel had been excavated, the surrounding rock failure could be divided into three stages: the initial deformation stage, fissure development stage, and mild deformation stage. The destruction time periods of these stages were 0–0.5 h, 0.5–2 h, and 2–6 h, and the destruction ranges were 0.4 m, 1 m, and 1.5 m, respectively. The amount of roof subsidence, the displacement of the two sides, and the floor heave influence each other, and the range of the bearing ring (5.6 m) of the floor is larger than that of the roof (3.4 m) after the surrounding rock has been damaged. The findings suggest that the floor should be supported first, before the two sides and the roof; then, the support of the key parts (roof and floor corners) should be strengthened. The roof, floor, and two sides are considered for controlling the deformation of the surrounding rock in a coupled trinity support mode. Because of the unfavorable conditions in the area, overexcavation backfill technology was used. The new support was successfully applied during the subsequent construction of the rock tunnel. Based on the long-term monitoring results of the surrounding rock deformation, the floor heave control yielded satisfactory results and maintained the long-term stability of the roadway. Therefore, this study can serve as a reference for preventing floor heave in similar high-stress roadways in the future.

scholarly journals Study on the Fracture Distribution Law and the Influence of Discrete Fractures on the Stability of Roadway Surrounding Rock in the Sanshandao Coastal Gold Mine, China

2019 ◽  
Vol 11 (10) ◽  
pp. 2758
Author(s):  
Gang Liu ◽  
Fengshan Ma ◽  
Haijun Zhao ◽  
Guang Li ◽  
Jiayuan Cao ◽  
...  
Keyword(s):  
Field Investigation ◽  
Surrounding Rock ◽  
Gold Mine ◽  
Rock Masses ◽  
Distribution Law ◽  
Deformation And Failure ◽  
Roadway Stability ◽  
The Stability ◽  
Fracture Distribution ◽  
Matlab Programming

Cracks are critical for the deformation and failure of rock masses, but the effects of real cracks are rarely considered when evaluating the stability and safety of practical engineering. This paper presents a study on the application of fractures in the Sanshandao Gold Mine. Field investigation and statistical analysis methods were adopted to obtain the distribution laws of the cracks. Laboratory tests, MATLAB programming, and simulation using the software, GDEM (Gdem Technology, Beijing, China, Co., Ltd.), were employed to study the mechanical behaviors of rock masses with real fractures after excavation. The main results are as follows: (1) Three sets of highly discrete cracks were developed in the study area. Their inclination and dip can be approximately considered to follow a Gaussian distribution or uniform distribution. They had close ties to the three faults developed in the mining area. (2) Compared with the model that did not consider cracks and the model processed by the equivalence idea, the surrounding rock deformation caused by excavation of the model that considered real cracks was larger than that of the former and smaller than that of the latter. However, its influence range was larger than that of the other two models. The results show that it is reasonable to use three sets of discrete cracks to characterize the fracture distribution of the surrounding rock. In the evaluation of roadway stability, it is not advisable to use the equivalence method to deal with all the cracks. Considering a part of the cracks that are compatible with the size of the calculation model, a relatively accurate evaluation can be obtained in terms of the deformation, failure, and permeability changes of the surrounding rock.

scholarly journals A Control Method of Rock Burst for Dynamic Roadway Floor in Deep Mining Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-16 ◽  
Author(s):  
Zhimin Xiao ◽  
Jun Liu ◽  
Shitan Gu ◽  
Mingqing Liu ◽  
Futian Zhao ◽  
...  
Keyword(s):  
Rock Burst ◽  
Control Method ◽  
Tectonic Stress ◽  
Surrounding Rock ◽  
Floor Rock ◽  
Deep Mining ◽  
Failure Characteristics ◽  
Deformation And Failure ◽  
Working Face ◽  
Geological Conditions

Roadway floor rock burst is an important manifestation of rock bursts in deeply buried mines. With the increase of mining depth and mining intensity, rock burst disasters in the roadway floor such as floor heaves are becoming more serious. The article investigated the roadway floor severe heave caused by floor rock burst during excavation of the No. 3401 working face, which was controlled by an anticlinal structure and deep mining in Shandong Mine, China. Firstly, by analyzing geological conditions of the working face, roadway support parameters, and characteristics of coal and rock, it was revealed that high tectonic stress and high crustal stress were main causes of the floor rock burst. Secondly, based on the Theory of Mechanics and Theory of Energy, the energy conversion process in the roadway floor was discussed, and the rock burst condition caused by elastic energy in the roadway floor was analyzed. The failure characteristics of roadway-surrounding rock were also inspected, using a borehole recorder. The roof and sidewalls of roadway mainly contained fissures and cracks, whereas cracks and broken areas are distributed in the roadway floor. Finally, based on the deformation and failure characteristics of roadway-surrounding rock, a method termed “overbreaking-bolting and grouting-backfill” was proposed to control roadway floor rock burst. The method was tested in the field, and the results showed that it could effectively control the deformation of roadway floor and rock burst, guaranteeing the stability of roadway floor. This impact control method for the roadway floor can provide a reference for the prevention and control of roadway rock burst in mines with similar geological conditions.

Analysis on Causes of Deformation and Failure of Large Scale Underground Powerhouse

2011 ◽  
Vol 71-78 ◽  
pp. 644-650 ◽  
Author(s):  
Jin Yu Dong ◽  
Ji Hong Yang ◽  
Guo Xiang Yang ◽  
Fa Quan Wu
Keyword(s):  
Large Scale ◽  
Shear Failure ◽  
Surrounding Rock ◽  
Concrete Cracking ◽  
Underground Powerhouse ◽  
Deformation And Failure ◽  
Underground Caverns ◽  
Geological Conditions ◽  
The Right

Jinoping No.1 is a dominant reservoir cascade hydropower station which locates at the downstream of Yalong river. The underground powerhouse locates at the right bank of the dam, lithology is marble that belongs to the second member of Zagunao group. It is constructed at region with very complicated geological conditions and high geo-stress. Concrete cracking, spalling and steel buckling and bending occurred at the downstream crown after supporting. This paper analysed the causes of deformation and failure through geological analysis and numerical simulation, and concluded that deformation and failure mainly occurred at the region where the quality of surrounding rock belongs to Ⅲ1 and had nothing to do with the unstable block cut by cracks; stress field of surrounding rock varied continueously with the proceeding of successive excavation of underground powerhouse, so the compressive stress and shear stress concentration occurred which caused the compression and shear failure of downstream crown and made it bending to the free face. It is significant to the further enforcement of this project and to the research on other similar underground caverns theoretically and practically.

Sign in / Sign up

Export Citation Format

Share Document