scholarly journals The study of the spark ignition engine operation at fuelling with n-butanol-gasoline blends

2020 ◽  
Vol 180 ◽  
pp. 01010
Author(s):  
Cristian Sandu ◽  
Constantin Pană ◽  
Niculae Negurescu ◽  
Alexandru Cernat ◽  
Cristian Nuţu ◽  
...  
Keyword(s):  
Oxygen Content ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Good Alternative ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Engine Operation ◽  
High Oxygen Content ◽  
Combustion Properties

For conventional internal combustion engines alternative fuels such alcohols (ethanol, methanol and butanol) have attracted more attention. This aspect is due to the fact that alcohols have good combustion properties and high oxygen content. Butanol is a viable fuel for blending with conventional fuels such as gasoline or diesel because of its high miscibility with these conventional fuels. The high combustion speed of butanol compared to that of gasoline ensures a shorter burning process thus the engine thermal efficiency can potentially be improved. Moreover, the additional oxygen content of the alcohol n-butanol can potentially improve the combustion process and can lead to a reduction of carbon monoxide and unburnt hydrocarbons emissions level. Utilizing butanol-gasoline blends can provide a good solution for the reduction of greenhouse gases level (CO2) and pollutants level (CO, HC, and NOx). An experimental study was carried out in a spark ignition engine which was fueled with a blend of n-butanol-gasoline at different volume percentages. The objective of this paper is to determine the effects of butanol on the engine energetic performances and on the emissions (HC, CO and NOx). At first the engine fueled with pure gasoline to set up a reference at the engine load χ=55%, engine speed of n=2500 min-1 and different excess air coefficients (λ). After setting the reference the engine was fueled with butanol-gasoline blend (10% vol. butanol 90% vol. gasoline) with the same engine adjustments. At butanol use the CO, HC and CO2 emissions level decreased, but the NOx emission level increased. The butanol can be considered a good alternative fuel for the spark ignition engines without modifications.

A comparative study of the effect of compression ratio on the efficiency and flame development angle in a Cooperative Fuel Research engine fueled with binary gasoline–alcohol blends

2019 ◽  
pp. 146808741985910 ◽  
Author(s):  
Guillermo Rubio-Gómez ◽  
Lis Corral-Gómez ◽  
David Rodriguez-Rosa ◽  
Fausto A Sánchez-Cruz ◽  
Simón Martínez-Martínez
Keyword(s):  
Comparative Study ◽  
Compression Ratio ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Flame Development ◽  
The Impact

In the last few years, increasing concern about the harmful effects of the use of fossil fuels in internal combustion engines has been observed. In addition, the limited availability of crude oil has driven the interest in alternative fuels, especially biofuels. In the context of spark ignition engines, bioalcohols are of great interest owing to their similarities and blend capacities with gasoline. Methanol and ethanol have been widely used, mainly due to their knocking resistance. Another alcohol of great interest is butanol, thanks to its potential of being produced as biofuel and its heat value closer to gasoline. In this study, a comparative study of gasoline–alcohol blend combustion, with up to 20% volume, with neat gasoline has been carried out. A single-cylinder, variable compression ratio, Cooperative Fuel Research-type spark ignition engine has been employed. The comparison is made in terms of fuel conversion efficiency and flame development angle. Relevant information related to the impact in the combustion process of the use of the three main alcohols used in blends with gasoline has been obtained.

Theoretical and Experimental Researches Regard the Use of Bioethanol at the Supercharged Spark Ignition Engine

2016 ◽  
Vol 822 ◽  
pp. 190-197
Author(s):  
Obeid Zuhair H. Obeid ◽  
Constantin Pana ◽  
Niculae Negurescu ◽  
Alexandru Cernat ◽  
Iulius Bondoc
Keyword(s):  
Combustion Process ◽  
Alternative Fuel ◽  
Good Alternative ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Experimental Investigations ◽  
Spark Ignition Engines ◽  
Local Cooling ◽  
Combustion Properties ◽  
Si Engines

The use of bioethanol as alternative fuel for automotive supercharged spark ignition engines is required especially for to respect the pollutant norms which become more and more severe, especially for NOx emissions.The general objective of the researches is improving of a automotive supercharged spark ignition engine efficiency, improving performance of power and torque and decreasing of the emissions level by the use of bioethanol. Bioethanol is so a very good alternative fuel for SI engines because of its better combustion proprieties comparative to the gasoline as a good cooling agent of the intake air due to its high vaporization heat.The paper presents results of some theoretical and experimental investigations on a 1.5 L supercharged SI engine fuelled with gasoline-bioethanol blends. The investigations show that the improvement of the combustion process by use the bioethanol at the supercharged spark ignition engine leads to the reduction of BSFC, to the accentuated reduction CO and HC due to a lower C content and better combustion properties of the bioethanol. In same time, the NOx emissions level significantly decreases because of the local cooling effect produced by bioethanol vaporization.

scholarly journals Impact of Simulated Biogas Compositions (CH4 and CO2) on Vibration, Sound Pressure and Performance of a Spark Ignition Engine

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7037
Author(s):  
Donatas Kriaučiūnas ◽  
Tadas Žvirblis ◽  
Kristina Kilikevičienė ◽  
Artūras Kilikevičius ◽  
Jonas Matijošius ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Negative Correlation ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Sound Pressure ◽  
Raw Materials ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Positive Correlation

Biogas has increasingly been used as an alternative to fossil fuels in the world due to a number of factors, including the availability of raw materials, extensive resources, relatively cheap production and sufficient energy efficiency in internal combustion engines. Tightening environmental and renewable energy requirements create excellent prospects for biogas (BG) as a fuel. A study was conducted on a 1.6-L spark ignition (SI) engine (HR16DE), testing simulated biogas with different methane and carbon dioxide contents (100CH4, 80CH4_20CO2, 60CH4_40CO2, and 50CH4_50CO2) as fuel. The rate of heat release (ROHR) was calculated for each fuel. Vibration acceleration time, sound pressure and spectrum characteristics were also analyzed. The results of the study revealed which vibration of the engine correlates with combustion intensity, which is directly related to the main measure of engine energy efficiency—break thermal efficiency (BTE). Increasing vibrations have a negative correlation with carbon monoxide (CO) and hydrocarbon (HC) emissions, but a positive correlation with nitrogen oxide (NOx) emissions. Sound pressure also relates to the combustion process, but, in contrast to vibration, had a negative correlation with BTE and NOx, and a positive correlation with emissions of incomplete combustion products (CO, HC).

Effects of Blending Gasoline With Ethanol and Butanol on Engine Efficiency and Emissions Using a Direct-Injection, Spark-Ignition Engine

2009 ◽  
Author(s):  
Christopher Cooney ◽  
Thomas Wallner ◽  
Steve McConnell ◽  
Jeffrey C. Gillen ◽  
Clint Abell ◽  
...  
Keyword(s):  
Alternative Fuels ◽  
Direct Injection ◽  
Substantial Reduction ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Engine Operation ◽  
Advanced Biofuels ◽  
Engine Calibration ◽  
Combustion Behavior ◽  
Test Engine

The new U.S. Renewable Fuel Standard requires an increase of ethanol and advanced biofuels to 36 billion gallons by 2022. Due to its high octane number, renewable character and minimal toxicity, ethanol was believed to be one of the most favorable alternative fuels to displace gasoline in spark-ignited engines. However, ethanol fuel results in a substantial reduction in vehicle range when compared to gasoline. In addition, ethanol is fully miscible in water which requires blending at distribution sites instead of the refinery. Butanol, on the other hand, has an energy density comparable to gasoline and lower affinity for water than ethanol. Butanol has recently received increased attention due to its favorable fuel properties as well as new developments in production processes. The advantageous properties of butanol warrant a more in-depth study on the potential for butanol to become a significant component of the advanced biofuels mandate. This study evaluates the combustion behavior, performance, as well as the regulated engine-out emissions of ethanol and butanol blends with gasoline. Two of the butanol isomers; 1-butanol as well as iso-butanol, were tested as part of this study. The evaluation includes gasoline as a baseline, as well as various ethanol/gasoline and butanol/gasoline blends up to a volume blend ratio of 85% of the oxygenated fuel. The test engine is a spark ignition, direct-injection, (SIDI), four-cylinder test engine equipped with pressure transducers in each cylinder. These tests were designed to evaluate a scenario in terms of using these alcohol blends in an engine calibrated for pump gasoline operation. Therefore no modifications to the engine calibration were performed. Following this analysis of combustion behavior and emissions with the base engine calibration, future studies will include detailed heat release analysis of engine operation without exhaust gas recirculation. Also, knock behavior of the different fuel blends will be studied along with unregulated engine out emissions.

scholarly journals Quantitative, time-resolved detection of CH<sub>4</sub> concentrations in flows for injection analysis in CNG engines using IR absorption

2017 ◽  
Vol 6 (1) ◽  
pp. 185-198 ◽  
Author(s):  
Stephan Bauke ◽  
Kai Golibrzuch ◽  
Frank Rotter ◽  
Hainer Wackerbarth ◽  
Olaf Thiele ◽  
...  
Keyword(s):  
Alternative Fuels ◽  
Light Attenuation ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Infrared Light ◽  
Transport Sector ◽  
High Time Resolution ◽  
Ir Absorption ◽  
Engine Operation ◽  
Inlet Manifold

Abstract. The reduction of CO2 and other greenhouse gas emissions is an important driving force for the development of modern engines. Especially in the transport sector, the use of alternative fuels like methane, the main component of compressed natural gas (CNG), is an applied measure to achieve this goal. This work describes the development of an optical measurement system for accurate quantification of CH4 densities in gas flows based on broadband absorption of infrared light, i.e. non-dispersive IR absorption spectroscopy (NDIR). We demonstrate the capability of the system to achieve high time resolution as well as high measurement accuracy and precision. The optical set-up of the system is designed for usage at the inlet manifold of CNG-fuelled spark ignition engines. It allows for detailed analysis of the mixture formation during single engine cycles. CH4 densities can be determined by monitoring the infrared light attenuation around 3.3 µm caused by the ν3 anti-symmetric C–H-stretch vibration. We calculate the nonlinear relation between transmittance and CH4 density from absorption cross sections calculated from the HITRAN database. The theoretical transmittance signals are corrected for spectral influences of the bandpass filter, the detector sensitivity, the fibre transmittance and the emission spectrum of the light source in order to calculate CH4 densities directly from the measured transmittance. A calibration function corrects remaining differences between experimental and simulated values and improves the accuracy. We show that the sensor system is capable for determination of air–fuel ratios (λ-values) and demonstrate the dynamic quantification of a CH4 injection into a flow channel under various flow conditions. Furthermore, we present the first measurements with a prototype probe capable of measurements inside the inlet manifold of a four-stroke spark ignition engine. We validate the detection strategy in experiments with premixed gases using a modified inlet geometry and demonstrate its application under standard engine operation with port fuel injection while varying the injection parameters.

A Multiple-Zone Cycle Simulation for Spark-Ignition Engines: Thermodynamic Details

2001 ◽  
Author(s):  
Jerald A. Caton
Keyword(s):  
Combustion Process ◽  
Load Condition ◽  
Engine Performance ◽  
Thermodynamic Cycle ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Engine Operation ◽  
Part Load ◽  
Cycle Simulation ◽  
The Individual

Abstract A thermodynamic cycle simulation was developed for a spark-ignition engine which included the use of multiple zones for the combustion process. This simulation was used to complete analyses for a commercial, spark-ignition V-8 engine operating at a part load condition. Specifically, the engine possessed a compression ratio of 8.1:1, and had a bore and stroke of 101.6 and 88.4 mm, respectively. A part load operating condition at 1400 rpm with an equivalence ratio of 1.0 was examined. Results were obtained for overall engine performance, for detailed in-cylinder events, and for the thermodynamics of the individual processes. In particular, the characteristics of the engine operation with respect to the combustion process were examined. Implications of the multiple zones formulation for the combustion process are described.

Analysis of Thermal Efficiency in a Hydrogen Premixed Spark Ignition Engine

1999 ◽  
Author(s):  
Toshio Shudo ◽  
Yasuo Nakajima ◽  
Takayuki Futakuchi
Keyword(s):  
Combustion Chamber ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Methane Combustion ◽  
Spark Ignition ◽  
Hydrogen Combustion ◽  
Spark Ignition Engine ◽  
Chamber Wall ◽  
Flame Velocity

Abstract Hydrogen has higher flame velocity and smaller quenching distance than hydrocarbon fuels, and is supposed to have special characteristics in combustion process of internal combustion engines. In this research, contributors to thermal efficiency in a hydrogen premixed spark ignition engine were analyzed and compared with methane combustion. Results showed hydrogen combustion had higher cooling loss to combustion chamber wall, and thermal efficiency of hydrogen combustion was mainly dominated by both cooling loss to combustion chamber wall and degree of constant volume combustion.

The study of a tractor diesel engine operation on ethanol and rapeseed oil at various speed modes

Trudy NAMI ◽  
2022 ◽  
pp. 53-59
Author(s):  
A. N. Kozlov ◽  
M. I. Araslanov
Keyword(s):  
Diesel Engine ◽  
Rapeseed Oil ◽  
Power Plants ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Renewable Energy Sources ◽  
Comparative Method ◽  
Combustion Process ◽  
Engine Operation ◽  
Tractor Diesel

Introduction (problem statement and relevance). The depletion of oil fuels reserves and the steady growth of their consumption will require new solutions in the development of technologies based on renewable energy sources. The study of the possible alternative fuels use in internal combustion engines is a complex scientific task, including the research of the alternative fuels effect on the power plants operation efficiency.The purpose of the study was to obtain the speed characteristics of a diesel engine operating on ethyl alcohol and rapeseed oil.Methodology and research methods. An air-cooled with volumetric mixture formation tractor diesel engine of dimension 2Ch 10.5/12.0 was selected as an object of research. The study was carried out by a comparative method. To measure the speed characteristic a fixed cyclic fuel supply was applied after the engine reaching the nominal operating mode at a crankshaft speed of 1800 min-1 and an average effective pressure in the cylinder of 0.588 MPa. This approach, with the all-mode regulator of the fuel pump turned off, made it possible to identify the main regularities of intra-cylinder processes at different speed modes of engine operation.Scientific novelty and results. The article presents the bench tests results of a diesel engine operating at various speed modes on ethanol and rapeseed oil, and analyzes in detail the main indicators of the combustion process and the effective engine performance in comparison to the use of traditional fuel. The practical significance lies in the possibility of using the obtained results to improve the diesel engines operation on alternative renewable fuels.

scholarly journals Parametric Investigation on Single Cylinder Spark Ignition Engine Fueled Methanol Blends; Water-Based Micro Emulsions and Conventional Gasoline

2021 ◽  
Vol 39 (3) ◽  
pp. 919-924
Author(s):  
Ufaith Qadiri ◽  
Amjad Ali Pasha ◽  
Mustafa Mutiur Rahman ◽  
Mohammed Abdul Raheem ◽  
Abdul Gani Abdul Jameel ◽  
...  
Keyword(s):  
Alternative Fuels ◽  
Spark Ignition ◽  
Simulation Software ◽  
Spark Ignition Engine ◽  
Emission Characteristics ◽  
Nox Emissions ◽  
Single Cylinder ◽  
Performance And Emission ◽  
Combustion Properties ◽  
Water Based

In this contribution, the investigation conducted on alternative fuels includes methanol 20% blended with gasoline 80% and emulsion-based fuel with the composition of gasoline 80%, ethanol 15%, and H2O 5% are compared with 100% conventional gasoline fuel. These fueled single-cylinders spark ignition engine is studied for checking their performance and emission characteristics as per future emission norms. This work is performed on One-dimensional AVL Boost Simulation Software. The simulations predicted the performance and emission characteristics were far lesser than conventional 100% gasoline. These fuels meet the strict emission regulations of Euro VII. The main purpose of this investigation is to use alternative fuels to improve the performance and emission characteristics of the single- cylinder spark ignition engine and reduce the consumption of fossil fuel reserves. This investigation led to the conclusion that by using methanol 20% in 80% gasoline and micro-emulsion, fuel improves the power, BSFC (brake specific fuel consumption), thermal efficiency and combustion properties of the single-cylinder spark-ignition engine. The CO, HC and NOx emissions were also reduced for alternative fuel than 100% gasoline fuel. The novel water-based emulsion fuel showed the lowest value of NOx emissions as compared to blended 20% methanol with 80% gasoline and 100% gasoline fuel.

scholarly journals Investigating Combustion Process of N-Butanol-Diesel Blends in a Diesel Engine with Variable Compression Ratio

2021 ◽  
Vol 3 (3) ◽  
pp. 618-628
Author(s):  
György Szabados ◽  
Kristóf Lukács ◽  
Ákos Bereczky
Keyword(s):  
Heat Release ◽  
Heat Release Rate ◽  
Compression Ratio ◽  
Release Rate ◽  
Ignition Delay ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Injection Angle ◽  
Combustion Properties

The search for alternative fuels for internal combustion engines is ongoing. Among the alternatives, plant-based fuels can also be mentioned. Alcohol is not a common fuel for diesel engines because the physical and chemical properties of the alcohols are closer to those of gasoline. In our research, the combustion properties of diesel-n-butanol mixtures have been investigated to obtain results on the effect of butanol blending on combustion. Among the combustion properties, ignition delay, in-cylinder pressure, and heat release rate can be mentioned. They have been observed under different compression conditions on an engine on which the compression ratio can be adjusted. The method used was a quite simple one, so the speed of the engine was set to a constant 900 rpm without load, while three compression ratios (19.92, 15.27, and 12.53) were adjusted with a fuel flow rate of 13 mL/min and the pre-injection angle of 18° BTDC. Blending butanol into the investigated fuel does not significantly affect maximal values of indicated pressure, while much more effect on the pressure rising rate can be detected. Furthermore, heat release rate and ignition delay increased at every compression ratio investigated. Despite the low blending rates of butanol in the mixtures, butanol significantly affects the combustion parameters, especially at high compression ratios.

Sign in / Sign up

Export Citation Format

Share Document