scholarly journals Impact of Simulated Biogas Compositions (CH4 and CO2) on Vibration, Sound Pressure and Performance of a Spark Ignition Engine

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 7037
Author(s):  
Donatas Kriaučiūnas ◽  
Tadas Žvirblis ◽  
Kristina Kilikevičienė ◽  
Artūras Kilikevičius ◽  
Jonas Matijošius ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Negative Correlation ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Sound Pressure ◽  
Raw Materials ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Positive Correlation

Biogas has increasingly been used as an alternative to fossil fuels in the world due to a number of factors, including the availability of raw materials, extensive resources, relatively cheap production and sufficient energy efficiency in internal combustion engines. Tightening environmental and renewable energy requirements create excellent prospects for biogas (BG) as a fuel. A study was conducted on a 1.6-L spark ignition (SI) engine (HR16DE), testing simulated biogas with different methane and carbon dioxide contents (100CH4, 80CH4_20CO2, 60CH4_40CO2, and 50CH4_50CO2) as fuel. The rate of heat release (ROHR) was calculated for each fuel. Vibration acceleration time, sound pressure and spectrum characteristics were also analyzed. The results of the study revealed which vibration of the engine correlates with combustion intensity, which is directly related to the main measure of engine energy efficiency—break thermal efficiency (BTE). Increasing vibrations have a negative correlation with carbon monoxide (CO) and hydrocarbon (HC) emissions, but a positive correlation with nitrogen oxide (NOx) emissions. Sound pressure also relates to the combustion process, but, in contrast to vibration, had a negative correlation with BTE and NOx, and a positive correlation with emissions of incomplete combustion products (CO, HC).

A comparative study of the effect of compression ratio on the efficiency and flame development angle in a Cooperative Fuel Research engine fueled with binary gasoline–alcohol blends

2019 ◽  
pp. 146808741985910 ◽  
Author(s):  
Guillermo Rubio-Gómez ◽  
Lis Corral-Gómez ◽  
David Rodriguez-Rosa ◽  
Fausto A Sánchez-Cruz ◽  
Simón Martínez-Martínez
Keyword(s):  
Comparative Study ◽  
Compression Ratio ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Flame Development ◽  
The Impact

In the last few years, increasing concern about the harmful effects of the use of fossil fuels in internal combustion engines has been observed. In addition, the limited availability of crude oil has driven the interest in alternative fuels, especially biofuels. In the context of spark ignition engines, bioalcohols are of great interest owing to their similarities and blend capacities with gasoline. Methanol and ethanol have been widely used, mainly due to their knocking resistance. Another alcohol of great interest is butanol, thanks to its potential of being produced as biofuel and its heat value closer to gasoline. In this study, a comparative study of gasoline–alcohol blend combustion, with up to 20% volume, with neat gasoline has been carried out. A single-cylinder, variable compression ratio, Cooperative Fuel Research-type spark ignition engine has been employed. The comparison is made in terms of fuel conversion efficiency and flame development angle. Relevant information related to the impact in the combustion process of the use of the three main alcohols used in blends with gasoline has been obtained.

Assessing the Influence of Compression Ratio on Engine Characteristics Including Operational Limits of a Biogas-Fueled Spark-Ignition Engine

2020 ◽  
Vol 142 (12) ◽  
Author(s):  
Sachin Kumar Gupta ◽  
Mayank Mittal
Keyword(s):  
Compression Ratio ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Operating Range ◽  
Indicated Mean Effective Pressure ◽  
Wide Range

Abstract Biogas, which is a renewable alternative fuel, has high antiknocking properties with the potential to substitute fossil fuels in internal combustion engines. In this study, performance characteristics of a spark-ignition (SI) engine operated under methane (baseline case) and biogas are compared at the compression ratio (CR) of 8.5:1. Subsequently, the effect of CR on operational limits, performance, combustion, and emission characteristics of the engine fueled with biogas is evaluated. A variable compression ratio, spark-ignition engine was operated at various CRs of 8.5:1, 10:1, 11:1, 13:1, and 15:1 over a wide range of operating loads at 1500 rpm. Results showed that the operating range of the engine at 8.5:1 CR reduced when biogas was utilized in the engine instead of methane. However, the operating range of the engine for biogas extended with an increase in CR—an increase from 9.6 N-m-16.5 N-m to 2.8 N-m-15.1 N-m was observed when CR was increased from 8.5:1 to 15:1. The brake thermal efficiency improved from 13.7% to 16.3%, and the coefficient of variation (COV) of indicated mean effective pressure (IMEP) reduced from 12.7% to 1.52% when CR was increased from 8.5:1 to 15:1 at 8 N-m load. The emission level of carbon dioxide was decreased with an increase in CR due to an improvement in the thermal efficiency and the combustion process.

Analysis of Thermal Efficiency in a Hydrogen Premixed Spark Ignition Engine

1999 ◽  
Author(s):  
Toshio Shudo ◽  
Yasuo Nakajima ◽  
Takayuki Futakuchi
Keyword(s):  
Combustion Chamber ◽  
Thermal Efficiency ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Methane Combustion ◽  
Spark Ignition ◽  
Hydrogen Combustion ◽  
Spark Ignition Engine ◽  
Chamber Wall ◽  
Flame Velocity

Abstract Hydrogen has higher flame velocity and smaller quenching distance than hydrocarbon fuels, and is supposed to have special characteristics in combustion process of internal combustion engines. In this research, contributors to thermal efficiency in a hydrogen premixed spark ignition engine were analyzed and compared with methane combustion. Results showed hydrogen combustion had higher cooling loss to combustion chamber wall, and thermal efficiency of hydrogen combustion was mainly dominated by both cooling loss to combustion chamber wall and degree of constant volume combustion.

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

2019 ◽  
Author(s):  
Jinlong Liu ◽  
Cosmin E. Dumitrescu ◽  
Hemanth Bommisetty
Keyword(s):  
Natural Gas ◽  
Equivalence Ratio ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Spark Ignition ◽  
High Energy ◽  
Operating Conditions ◽  
Spark Ignition Engine ◽  
Intake Manifold ◽  
Spark Timing

Abstract The conversion of existing internal combustion engines to natural-gas operation can reduce U.S. dependence on petroleum imports and curtail engine-out emissions. In this study, a diesel engine with a 13.3 compression ratio was modified to natural-gas spark-ignited operation by replacing the original diesel injector with a high-energy spark plug and by fumigating fuel inside the intake manifold. The goal of this research was to investigate the combustion process inside the flat-head and bowl-in-piston chamber of such retrofitted engine when operated at different spark timings, mixture equivalence ratios, and engine speeds. The results indicated that advanced spark timing, a lower equivalence ratio, and a higher speed operation increased the ignition lag and made it more difficult to initiate the combustion process. Further, advanced spark timing, a larger equivalence ratio, and a lower speed operation accelerated the flame propagation process inside the piston bowl and advanced the start of the burn inside the squish. However, such conditions increased the burning duration inside the squish due to more fuel being trapped inside the squish volume and the smaller squish height during combustion. As a result, the end of combustion was almost the same despite the change in the operating conditions. In addition, the reliable ignition, stable combustion, and the lack of knocking showed promise for the application of natural-gas lean-burn spark-ignition operation in the heavy-duty transportation.

scholarly journals The study of the spark ignition engine operation at fuelling with n-butanol-gasoline blends

2020 ◽  
Vol 180 ◽  
pp. 01010
Author(s):  
Cristian Sandu ◽  
Constantin Pană ◽  
Niculae Negurescu ◽  
Alexandru Cernat ◽  
Cristian Nuţu ◽  
...  
Keyword(s):  
Oxygen Content ◽  
Alternative Fuels ◽  
Internal Combustion Engines ◽  
Combustion Process ◽  
Good Alternative ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Engine Operation ◽  
High Oxygen Content ◽  
Combustion Properties

For conventional internal combustion engines alternative fuels such alcohols (ethanol, methanol and butanol) have attracted more attention. This aspect is due to the fact that alcohols have good combustion properties and high oxygen content. Butanol is a viable fuel for blending with conventional fuels such as gasoline or diesel because of its high miscibility with these conventional fuels. The high combustion speed of butanol compared to that of gasoline ensures a shorter burning process thus the engine thermal efficiency can potentially be improved. Moreover, the additional oxygen content of the alcohol n-butanol can potentially improve the combustion process and can lead to a reduction of carbon monoxide and unburnt hydrocarbons emissions level. Utilizing butanol-gasoline blends can provide a good solution for the reduction of greenhouse gases level (CO2) and pollutants level (CO, HC, and NOx). An experimental study was carried out in a spark ignition engine which was fueled with a blend of n-butanol-gasoline at different volume percentages. The objective of this paper is to determine the effects of butanol on the engine energetic performances and on the emissions (HC, CO and NOx). At first the engine fueled with pure gasoline to set up a reference at the engine load χ=55%, engine speed of n=2500 min-1 and different excess air coefficients (λ). After setting the reference the engine was fueled with butanol-gasoline blend (10% vol. butanol 90% vol. gasoline) with the same engine adjustments. At butanol use the CO, HC and CO2 emissions level decreased, but the NOx emission level increased. The butanol can be considered a good alternative fuel for the spark ignition engines without modifications.

Extraction and Determination of Physico-chemical Properties of Oil from Watermelon Seeds (Citrullus lanatus L) to Use in Internal Combustion Engines

2017 ◽  
Vol 68 (11) ◽  
pp. 2676-2681
Author(s):  
Mihaela Gabriela Dumitru ◽  
Dragos Tutunea
Keyword(s):  
Fatty Acid ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Citrullus Lanatus ◽  
Combustion Process ◽  
Chemical Properties ◽  
Physico Chemical ◽  
Mean Diameter ◽  
Geometrical Mean ◽  
Reduction Of Nox

The purpose of this work was to investigate the physicochemical properties of watermelon seeds and oil and to find out if this oil is suitable and compatible with diesel engines. The results showed that the watermelon seeds had the maximum length (9.08 mm), width (5.71mm), thickness (2.0 mm), arithmetic mean diameter (5.59 mm), geometrical mean diameter (4.69 mm), sphericity (51.6%), surface area (69.07), volume 0.17 cm3 and moisture content 5.4%. The oil was liquid at room temperature, with a density and refractive index of 0.945 and 1.4731 respectively acidity value (1.9 mgNaOH/g), free fatty acid (0.95 mgNaOH), iodine value (120 mgI2/100g), saponification value (180 mgKOH/g), antiradical activity (46%), peroxide value (7.5 mEqO2/Kg), induction period (6.2 h), fatty acid: palmitic acid (13.1%), stearic acid (9.5 %), oleic acid (15.2 %) and linoleic acid (61.3%). Straight non food vegetable oils can offer a solution to fossil fuels by a cleaner burning with minimal adaptation of the engine. A single cylinder air cooled diesel engine Ruggerini RY 50 was used to measure emissions of various blends of watermelon oil (WO) and diesel fuel (WO10D90, WO20D80, WO30D70 and WO75D25). The physic-chemical properties of the oil influence the combustion process and emissions leading to the reduction of NOX and the increase in CO, CO2 and HC.

scholarly journals Numerical Study of Engine Performance and Emissions for Port Injection of Ammonia into a Gasoline\Ethanol Dual-Fuel Spark Ignition Engine

2021 ◽  
Vol 11 (4) ◽  
pp. 1441
Author(s):  
Farhad Salek ◽  
Meisam Babaie ◽  
Amin Shakeri ◽  
Seyed Vahid Hosseini ◽  
Timothy Bodisco ◽  
...  
Keyword(s):  
Numerical Study ◽  
Combustion Process ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Combustion Model ◽  
Dual Fuel ◽  
Spark Ignition Engines ◽  
Performance And Emissions ◽  
Hc Emissions

This study aims to investigate the effect of the port injection of ammonia on performance, knock and NOx emission across a range of engine speeds in a gasoline/ethanol dual-fuel engine. An experimentally validated numerical model of a naturally aspirated spark-ignition (SI) engine was developed in AVL BOOST for the purpose of this investigation. The vibe two zone combustion model, which is widely used for the mathematical modeling of spark-ignition engines is employed for the numerical analysis of the combustion process. A significant reduction of ~50% in NOx emissions was observed across the engine speed range. However, the port injection of ammonia imposed some negative impacts on engine equivalent BSFC, CO and HC emissions, increasing these parameters by 3%, 30% and 21%, respectively, at the 10% ammonia injection ratio. Additionally, the minimum octane number of primary fuel required to prevent knock was reduced by up to 3.6% by adding ammonia between 5 and 10%. All in all, the injection of ammonia inside a bio-fueled engine could make it robust and produce less NOx, while having some undesirable effects on BSFC, CO and HC emissions.

scholarly journals LES study on mixing and combustion in a Direct Injection Spark Ignition engine

2018 ◽  
Vol 73 ◽  
pp. 32
Author(s):  
Nicolas Iafrate ◽  
Anthony Robert ◽  
Jean-Baptiste Michel ◽  
Olivier Colin ◽  
Benedicte Cuenot ◽  
...  
Keyword(s):  
Ignition Time ◽  
Direct Injection ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Pollutant Emissions ◽  
Spark Ignition Engines ◽  
Eddy Simulation ◽  
Mixture Preparation ◽  
The Impact

Downsized spark ignition engines coupled with a direct injection strategy are more and more attractive for car manufacturers in order to reduce pollutant emissions and increase efficiency. However, the combustion process may be affected by local heterogeneities caused by the interaction between the spray and turbulence. The aim for car manufacturers of such engine strategy is to create, for mid-to-high speeds and mid-up-high loads, a mixture which is as homogeneous as possible. However, although injection occurs during the intake phase, which favors homogeneous mixing, local heterogeneities of the equivalence ratio are still observed at the ignition time. The analysis of the mixture preparation is difficult to perform experimentally because of limited optical accesses. In this context, numerical simulation, and in particular Large Eddy Simulation (LES) are complementary tools for the understanding and analysis of unsteady phenomena. The paper presents the LES study of the impact of direct injection on the mixture preparation and combustion in a spark ignition engine. Numerical simulations are validated by comparing LES results with experimental data previously obtained at IFPEN. Two main analyses are performed. The first one focuses on the fuel mixing and the second one concerns the effect of the liquid phase on the combustion process. To highlight these phenomena, simulations with and without liquid injection are performed and compared.

Comparison of Random Forest and Neural Network in Modelling the Performance and Emissions of a Natural Gas Spark Ignition Engine

2021 ◽  
pp. 1-20
Author(s):  
Jinlong Liu ◽  
Qiao Huang ◽  
Christopher Ulishney ◽  
Cosmin E. Dumitrescu
Keyword(s):  
Neural Network ◽  
Random Forest ◽  
Natural Gas ◽  
Internal Combustion Engines ◽  
Engine Performance ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Data Driven ◽  
Ann Model ◽  
Mean Square Errors

Abstract Machine learning (ML) models can accelerate the development of efficient internal combustion engines. This study assessed the feasibility of data-driven methods towards predicting the performance of a diesel engine modified to natural gas spark ignition, based on a limited number of experiments. As the best ML technique cannot be chosen a priori, the applicability of different ML algorithms for such an engine application was evaluated. Specifically, the performance of two widely used ML algorithms, the random forest (RF) and the artificial neural network (ANN), in forecasting engine responses related to in-cylinder combustion phenomena was compared. The results indicated that both algorithms with spark timing, mixture equivalence ratio, and engine speed as model inputs produced acceptable results with respect to predicting engine performance, combustion phasing, and engine-out emissions. Despite requiring more effort in hyperparameter optimization, the ANN model performed better than the RF model, especially for engine emissions, as evidenced by the larger R-squared, smaller root-mean-square errors, and more realistic predictions of the effects of key engine control variables on the engine performance. However, in applications where the combustion behavior knowledge is limited, it is recommended to use a RF model to quickly determine the appropriate number of model inputs. Consequently, using the RF model to define the model structure and then employing the ANN model to improve the model's predictive capability can help to rapidly build data-driven engine combustion models.

Sign in / Sign up

Export Citation Format

Share Document