scholarly journals Research on capacity configuration method of microgrid considering system cost

2020 ◽  
Vol 198 ◽  
pp. 01051
Author(s):  
Ning Hu ◽  
Juncheng Si ◽  
Yuanyuan Wang ◽  
Dehua Wang ◽  
Hanghang Liu ◽  
...  

Microgrid is a new type of power supply structure and will play an important role in ensuring power supply. Because of the high cost of micro grid construction, this is very necessary to determine the lowest capacity configuration and realize the best function configuration, which is an urgent problem in engineering construction. Therefore, this paper first establishes simulation analysis model, puts forward economic optimization model and constraints, and formulates system configuration scheme and construction cost. The results show that the method is feasible and effective. This scheme not only reduces the operation cost of the system, but also provides a reference for the construction of microgrid engineering.

Circuit World ◽  
2017 ◽  
Vol 43 (4) ◽  
pp. 152-155
Author(s):  
Guozeng Wu ◽  
Quanlin Dong

Purpose The purpose of this paper is to improve the stability of high voltage DC power supply and reduce the ripple. Design/methodology/approach The study was conducted using the simulation analysis model and numerical calculation. Findings By increasing the output arm capacitance, the expression of ripple and times of the output arm capacitance and the auxiliary arm capacitance is derived. The output ripple is determined by the value of the output arm capacitance. Finally, the correctness of the method and the formula are verified using circuit simulation. Originality value This paper presents a method to improve the power supply stability.


2014 ◽  
Vol 556-562 ◽  
pp. 1408-1412
Author(s):  
Zhi Qiang Zhang

In this paper, the following work is done: a new type of translational transmission device is designed; explained in detail are the operating principle, structural features, relationship of mechanism parameter and non interference conditions of the movement; the optimization analysis of transmission device is implemented on the basis of non interference conditions of the bucket movement; structural modeling and simulation analysis are carried out by utilization of Pro/e & Recurdyn; and based on virtual prototype technology, the new type of translational transmission device is verified by experiments, the data of which prove the translational transmission device reasonable and practicable. In conclusion, this paper has laid the theoretical foundation of the practical application of the translational transmission device.


2012 ◽  
Vol 271-272 ◽  
pp. 1742-1749
Author(s):  
Peng Cheng Huang ◽  
Qing Hua Yang ◽  
Guan Jun Bao ◽  
Li Bin Zhang

Aimed at existing problems on the bending performance of pneumatic bending joint, a new type of pneumatic bending joint is proposed in this paper. Double flexible pneumatic actuators are used as actuating drivers. Based on the first law of thermodynamics and the joint dynamic equation, the angle dynamic model is established and analyzed. Moreover simplified model is proposed. Meanwhile, its dynamic characteristic is analyzed through simulation analysis. The simulation suggests the following results: in the gas-filled phase, the joint’s pressure response time is about 10ms; while it is about 60ms in the gas-escape phase; and the angle response time of joint is 10 to 20ms. When the joint damping coefficient is increasing, this value will also increase.


2018 ◽  
Vol 878 ◽  
pp. 89-94 ◽  
Author(s):  
Er Lei Wang

Implementing monitoring over construction process of old bridge’s reinforcement serves as an important measure to ensure construction quality and safety and realize the goal of reinforcement. This paper, with a case study of the maintenance and reinforcement project of Zhicheng Yangtze River Bridge (steel truss highway-railway combined bridge), adopted MIDAS to establish finite element analysis model, and with stress and deformation as monitoring parameters, completed the construction monitoring work, numerical simulation analysis and site test for the reinforcement project.


2015 ◽  
Vol 645-646 ◽  
pp. 841-846 ◽  
Author(s):  
Jian Yan Wang ◽  
Ting Ting Wang ◽  
Hang Guo

Accelerometer in MEMS always is made by capacitive or piezoresistive, whose dynamic response is not good, the operating frequency is narrow, and the cross-axis sensitivity is low. A new type of piezoelectric micro-accelerometer is designed, and its structure is “x” type. The sensing unit is piezoelectric PZT films, which is achieved by sol-gel method. The accelerometer is a triaxial accelerometer. The theoretical and simulation analysis is used to achieve the charge sensitivity and response frequency, and also get the optimal structural parameters. A new circuit connection is proposed to improve the sensitivity and avoid the cross-axis sensitivity. The design achieves the z-axis sensitivity with more than 40 pC/g, x, y-axis sensitivity with more than 8pC/g, and the response frequency is about 3000Hz.


2020 ◽  
Vol 10 (4) ◽  
pp. 320-329
Author(s):  
V. A. Zubakin

Transition to digital technologies in management of power industry at all levels – an inevitable consequence of the technical progress which has generated opportunities for diversification, decarbonization and decentralization. Thus it is necessary to recognize that digitalization in power industry is NOT automation, and first of all creation of new business models, services and the markets with a support on possibility of digital economy. In this article questions of transformation of architecture of power industry, and also the main restrictions are considered: absence in regulatory base of new opportunities for consumers; general system inefficiency; impossibility “to legalize” appearance of new subjects (active consumers and prosumers, operators of micropower supply systems and aggregators of the distributed power objects, various service organizations), and also to deregulate the relations between them, to standardize interaction interfaces with EEC, to transform the energy markets.In article it is offered for transition to new digital power to make corresponding changes to the legislation: to enter new type of participants of the market (the active consumer, an active power complex), operated intellectual connection carrying out the standard with the electrical power system, completely responsible for management of the power supply and thus having the minimum regulatory restrictions on organizational model of the work; to improve rules of functioning of trade systems for creation of the markets of the distributed power providing an effective exchange of goods and services between traditional participants of the markets and participants of new type; to enter possibility of application of technologies of the coordinated management of the distributed sources and consumers of energy, systems of storage of energy, means of regulation of loading (“aggregators”) for the purpose of increase of efficiency of their use and participation in the electric power and power markets, including rendering system services and performance of other functions in these markets (the pilot project of such system is realized under the leadership of the author of the present article by subsidiary PAO “Lukoil” “Energy and gas of Romania”); to increase technological and economic flexibility of conditions on reliability and quality of power supply, creation of possibility of a choice by the consumer of conditions of power supply necessary for him and the account them in cost; to enter the accounting of the opportunities given by “new” decisions, at an assessment, formation and implementation of investment programs of the adjustable companies (including introduction of a technique of an assessment of investment projects at possession cost on all life cycle of the decision); to replace cross subsidizing of the population by industrial consumers with mechanisms of address social support and / or with system of restriction of volumes of consumption on reduced rates (“соцнорма”); to refuse further deployment of system of subsidizing of power supply of one regions at the expense of consumers of other regions (as it leads to growth of inefficient power consumption in the subsidized regions, not provided with available generation and infrastructure); to change norms of technical regulation, norms of design on the basis of new technologies; to make changes to programs of development of the infrastructure organizations of power industry taking into account trends of diversification, decentralization, decarbonization and a digitalization; to provide possibility of stimulation, including tariff, implementation of regional programs (pilot and regular), aimed at the complex development of power industry on the basis of new approaches, technologies and the practician, and also the hi-tech companies of small and medium business providing development.


2014 ◽  
Vol 940 ◽  
pp. 132-135 ◽  
Author(s):  
Yi Fan Zhao ◽  
Ling Sha ◽  
Yi Zhu

Established the dynamics simulation analysis model of crane hoisting mechanism based on the theory of dynamics in Adams software, and then through the three dimensional model of lifting mechanism dynamics entities, the constraints, load, drive can be added, the motion law can be defined to simulation analysis the change of the force of wire rope, the change of displacement, velocity and acceleration of lifting weight in the lifting process. On the basis of the simulation results, it can make a great improvement for the structure of crane and provide a meaningful theoretical reference for the hoisting machinery innovation design.


2021 ◽  
Vol 141 (10) ◽  
pp. 629-641
Author(s):  
Shintaro Negishi ◽  
Keisuke Kimura ◽  
Ikumi Suzuki ◽  
Takashi Ikegami

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Xing Wang ◽  
Yu Jiang ◽  
Yonghui Huang ◽  
Yue Huang ◽  
Fan Wang

Plate-cone reticulated shell is a new type of spatial structures with good mechanical behavior, technical economy, and architectural appearance. In this paper, using ANSYS software, the strength failure analysis model of composite laminates is established in cooperation with the Strength Criterion of Hoffman. The effects of layer number, laying direction, and thickness of laminates on the ultimate strength of laminates are studied by detailed parametric analysis, which provides a theoretical basis for the design of composite plate-cone reticulated shell and GFRP laminated plates. Some important conclusions are obtained and can be applied to engineering practice.


Sign in / Sign up

Export Citation Format

Share Document