scholarly journals Molecular dynamics simulation of multi-pass nano-grinding process

2018 ◽  
Vol 178 ◽  
pp. 03016
Author(s):  
Nikolaos E. Karkalos ◽  
Angelos P. Markopoulos
Keyword(s):  
Molecular Dynamics ◽  
Material Removal ◽  
Cutting Tools ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Grinding Process ◽  
Grinding Forces ◽  
Workpiece Surface ◽  
Abrasive Grains ◽  
Quality Surface

Grinding involves the use of a large number of micrometric abrasive grains in order to remove material from workpiece surface efficiently and finally render a high quality surface. More specifically, grinding in the nano-metric level serves for attaining nano-level surface quality by removing several layers of atoms from the workpiece surface. The abrasive grains act as individual cutting tools, performing primarily material removal but also induce alterations in the subsurface regions. In order to study the nano-grinding process, Molecular Dynamics (MD) method is particularly capable to provide comprehensive observations of the process and its outcome. In this study, MD simulations of multi-pass grinding for copper substrates, using two abrasive grains, are performed. After the simulations are carried out, results concerning grinding forces and temperatures are presented and discussed.

Molecular Dynamics Simulation of Nano-Grinding with Multiple Abrasive Grains

2017 ◽  
Vol 261 ◽  
pp. 115-120 ◽  
Author(s):  
Nikolaos E. Karkalos ◽  
Angelos P. Markopoulos
Keyword(s):  
Molecular Dynamics ◽  
Cutting Tools ◽  
Copper Substrate ◽  
Dynamics Simulation ◽  
Depth Of Cut ◽  
Workpiece Surface ◽  
Abrasive Grains ◽  
Process Simulations ◽  
Dynamics Method

During grinding a large number of micrometer or sub-micrometer grains remove material from the surface of a workpiece, acting as cutting tools. As the grains perform the material removal process, the alterations on the workpiece surface are correlated to the grain characteristics, as well as process parameters. In the case of nano-grinding, only several atomic layers are removed and surface quality of nanometer level is attained. For this process, simulations can be carried out with Molecular Dynamics method, with a view to determine its characteristics. In the present study, the case of peripheral nano-grinding of a copper substrate with multiple abrasive grains is investigated for various depths of cut (namely 0.35, 0.54 and 0.72 nm) and results concerning grinding forces, temperature and workpiece deformation are presented and discussed. Cutting forces, temperature and workpiece deformation was observed to increase between the cases with 0.54 and 0.72 nm depth of cut to a greater extent than between the cases with 0.35 and 0.54 nm depth of cut.

scholarly journals Mechanisms of subsurface damage and material removal during high speed grinding processes in Ni/Cu multilayers using a molecular dynamics study

RSC Advances ◽  
2017 ◽  
Vol 7 (67) ◽  
pp. 42047-42055 ◽  
Author(s):  
QiHong Fang ◽  
Qiong Wang ◽  
Jia Li ◽  
Xin Zeng ◽  
YouWen Liu
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulation ◽  
Material Removal ◽  
High Speed ◽  
Subsurface Damage ◽  
Dynamics Simulation ◽  
Grinding Process ◽  
Grinding Processes ◽  
High Speed Grinding

Molecular dynamics simulation of Ni/Cu multilayers under grinding process with a diamond tip is performed, with the aim of investigating the subsurface damage and material removal in Ni/Cu multilayers.

scholarly journals Molecular Dynamics Study of the Effect of Abrasive Grains Orientation and Spacing during Nanogrinding

Micromachines ◽  
2020 ◽  
Vol 11 (8) ◽  
pp. 712
Author(s):  
Nikolaos E. Karkalos ◽  
Angelos P. Markopoulos
Keyword(s):  
Molecular Dynamics ◽  
Chip Formation ◽  
Material Removal ◽  
Flat Surface ◽  
Ground Surface ◽  
Rake Angle ◽  
Dynamics Model ◽  
Grinding Forces ◽  
Abrasive Grains ◽  
Time Chip

Grinding at the nanometric level can be efficiently employed for the creation of surfaces with ultrahigh precision by removing a few atomic layers from the substrate. However, since measurements at this level are rather difficult, numerical investigation can be conducted in order to reveal the mechanisms of material removal during nanogrinding. In the present study, a Molecular Dynamics model with multiple abrasive grains is developed in order to determine the effect of spacing between the adjacent rows of abrasive grains and the effect of the rake angle of the abrasive grains on the grinding forces and temperatures, ground surface, and chip formation and also, subsurface damage of the substrate. Findings indicate that nanogrinding with abrasive grains situated in adjacent rows with spacing of 1 Å leads directly to a flat surface and the amount of material remaining between the rows of grains remains minimal for spacing values up to 5 Å. Moreover, higher negative rake angle of the grains leads to higher grinding forces and friction coefficient values over 1.0 for angles larger than −40°. At the same time, chip formation is suppressed and plastic deformation increases with larger negative rake angles, due to higher compressive action of the abrasive grains.

scholarly journals Understanding Covalent Grafting of Nanotubes onto Polymer Nanocomposites: Molecular Dynamics Simulation Study

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2621
Author(s):  
Seunghwa Yang
Keyword(s):  
Molecular Dynamics ◽  
Load Transfer ◽  
Cell Model ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Covalent Grafting ◽  
Modelling Strategies ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
External Loads

Here, we systematically interrogate the effects of grafting single-walled (SWNT) and multi-walled carbon nanotubes (MWNT) to polymer matrices by using molecular dynamics (MD) simulations. We specifically investigate key material properties that include interfacial load transfer, alteration of nanotube properties, and dispersion of nanotubes in the polymer matrix. Simulations are conducted on a periodic unit cell model of the nanocomposite with a straight carbon nanotube and an amorphous polyethylene terephthalate (PET) matrix. For each type of nanotube, either 0%, 1.55%, or 3.1% of the carbon atoms in the outermost nanotubes are covalently grafted onto the carbon atoms of the PET matrix. Stress-strain curves and the elastic moduli of nanotubes and nanocomposites are determined based on the density of covalent grafting. Covalent grafting promotes two rivalling effects with respect to altering nanotube properties, and improvements in interfacial load transfer in the nanocomposites are clearly observed. The enhanced interface enables external loads applied to the nanocomposites to be efficiently transferred to the grafted nanotubes. Covalent functionalization of the nanotube surface with PET molecules can alter the solubility of nanotubes and improve dispersibility. Finally, we discuss the current limitations and challenges in using molecular modelling strategies to accurately predict properties on the nanotube and polymers systems studied here.

A Study on the Uniaxial Tension of FCC Metals at Nano Level Using MD

2008 ◽  
Vol 32 ◽  
pp. 255-258
Author(s):  
Bohayra Mortazavi ◽  
Akbar Afaghi Khatibi
Keyword(s):  
Molecular Dynamics ◽  
Uniaxial Tension ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Face Centered Cubic ◽  
Engineering Strain ◽  
Fcc Metals ◽  
Engineering Stress ◽  
Nano Science ◽  
Face Centered

Molecular Dynamics (MD) are now having orthodox means for simulation of matter in nano-scale. It can be regarded as an accurate alternative for experimental work in nano-science. In this paper, Molecular Dynamics simulation of uniaxial tension of some face centered cubic (FCC) metals (namely Au, Ag, Cu and Ni) at nano-level have been carried out. Sutton-Chen potential functions and velocity Verlet formulation of Noise-Hoover dynamic as well as periodic boundary conditions were applied. MD simulations at different loading rates and temperatures were conducted, and it was concluded that by increasing the temperature, maximum engineering stress decreases while engineering strain at failure is increasing. On the other hand, by increasing the loading rate both maximum engineering stress and strain at failure are increasing.

Molecular Dynamics Simulation of a Pullout Test on a Carbon Nanotube in a Polymer Matrix

2014 ◽  
Vol 1700 ◽  
pp. 61-66
Author(s):  
Guttormur Arnar Ingvason ◽  
Virginie Rollin
Keyword(s):  
Molecular Dynamics ◽  
Polymer Matrix ◽  
Large Scale ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Atomistic Simulations ◽  
Polymer Molecules ◽  
Molecular Potential ◽  
Pull Out ◽  
Walled Carbon Nanotubes

ABSTRACTAdding single walled carbon nanotubes (SWCNT) to a polymer matrix can improve the delamination properties of the composite. Due to the complexity of polymer molecules and the curing process, few 3-D Molecular Dynamics (MD) simulations of a polymer-SWCNT composite have been run. Our model runs on the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS), with a COMPASS (Condensed phase Optimized Molecular Potential for Atomistic Simulations Studies) potential. This potential includes non-bonded interactions, as well as bonds, angles and dihedrals to create a MD model for a SWCNT and EPON 862/DETDA (Diethyltoluenediamine) polymer matrix. Two simulations were performed in order to test the implementation of the COMPASS parameters. The first one was a tensile test on a SWCNT, leading to a Young’s modulus of 1.4 TPa at 300K. The second one was a pull-out test of a SWCNT from an originally uncured EPON 862/DETDA matrix.

scholarly journals An Analysis Based on Molecular Docking and Molecular Dynamics Simulation Study of Bromelain as Anti-SARS-CoV-2 Variants

2021 ◽  
Vol 12 ◽  
Author(s):  
Trina Ekawati Tallei ◽  
Fatimawali ◽  
Afriza Yelnetty ◽  
Rinaldi Idroes ◽  
Diah Kusumawaty ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Molecular Docking ◽  
Molecular Dynamics Simulation ◽  
Three Dimensional ◽  
Md Simulations ◽  
Inhibitory Effect ◽  
Dynamics Simulation ◽  
Novel Coronavirus

The rapid spread of a novel coronavirus known as SARS-CoV-2 has compelled the entire world to seek ways to weaken this virus, prevent its spread and also eliminate it. However, no drug has been approved to treat COVID-19. Furthermore, the receptor-binding domain (RBD) on this viral spike protein, as well as several other important parts of this virus, have recently undergone mutations, resulting in new virus variants. While no treatment is currently available, a naturally derived molecule with known antiviral properties could be used as a potential treatment. Bromelain is an enzyme found in the fruit and stem of pineapples. This substance has been shown to have a broad antiviral activity. In this article, we analyse the ability of bromelain to counteract various variants of the SARS-CoV-2 by targeting bromelain binding on the side of this viral interaction with human angiotensin-converting enzyme 2 (hACE2) using molecular docking and molecular dynamics simulation approaches. We have succeeded in making three-dimensional configurations of various RBD variants using protein modelling. Bromelain exhibited good binding affinity toward various variants of RBDs and binds right at the binding site between RBDs and hACE2. This result is also presented in the modelling between Bromelain, RBD, and hACE2. The molecular dynamics (MD) simulations study revealed significant stability of the bromelain and RBD proteins separately up to 100 ns with an RMSD value of 2 Å. Furthermore, despite increases in RMSD and changes in Rog values of complexes, which are likely due to some destabilized interactions between bromelain and RBD proteins, two proteins in each complex remained bonded, and the site where the two proteins bind remained unchanged. This finding indicated that bromelain could have an inhibitory effect on different SARS-CoV-2 variants, paving the way for a new SARS-CoV-2 inhibitor drug. However, more in vitro and in vivo research on this potential mechanism of action is required.

Molecular Dynamics Simulation of Neutron Damage in β-SIC

1998 ◽  
Vol 540 ◽  
Author(s):  
J.M. Perlado ◽  
L. Malerba ◽  
T. Diaz De La Rubia
Keyword(s):  
Molecular Dynamics ◽  
Molecular Dynamics Simulation ◽  
Point Defects ◽  
Damage Accumulation ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Temperature Sensitive ◽  
Neutron Damage ◽  
Preliminary Study ◽  
Threshold Displacement

AbstractMolecular Dynamics (MD) simulations of neutron damage in β-SiC have been performed using a modified version of the Tersoff potential. The Threshold Displacement Energy (TDE) for Si and C atoms at 300 K has been determined along directions [001], [110], [111] and [ 1 1 1 ]. The existence of recombination barriers, which allow the formation of metastable, temperature-sensitive defects even below the threshold, has been observed. Displacement cascades produced by both C- and Si-recoils of energies spanning from 0.5 keV up to, respectively, 5 keV and 8 keV have also been simulated at 300 K and 1300 K. Their analysis, together with the analysis of damage accumulation (∼3.4×10-3 DPA) at 1300 K, reveals that the two sub-lattices exhibit opposite responses to irradiation: whereas only a little damage is produced on the “ductile” Si sub-lattice, many point-defects accumulate on the much more “fragile” C sub-lattice. A preliminary study of the nature and clustering tendency of these defects is performed. The possibility of disorder-induced amorphization is considered and the preliminary result is that no amorphization takes place at the dose and temperature simulated.

Influence of Carbon Nanotube Aspect Ratio on Glass Transition Temperature of Polymers: A Molecular Dynamics Simulation Study

2015 ◽  
Vol 817 ◽  
pp. 797-802 ◽  
Author(s):  
Cai Jiang ◽  
Jian Wei Zhang ◽  
Shao Feng Lin ◽  
Su Ju ◽  
Da Zhi Jiang
Keyword(s):  
Molecular Dynamics ◽  
Glass Transition ◽  
Carbon Nanotube ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Aspect Ratio ◽  
Epoxy Resin ◽  
Md Simulations ◽  
Diglycidyl Ether ◽  
Dynamics Simulation

Molecular dynamics (MD) simulations on three single walled carbon nanotube (SWCNT) reinforced epoxy resin composites were conducted to study the influence of SWCNT type on the glass transition temperature (Tg) of the composites. The composite matrix is cross-linked epoxy resin based on the epoxy monomers bisphenol A diglycidyl ether (DGEBA) cured by diaminodiphenylmethane (DDM). MD simulations of NPT (constant number of particles, constant pressure and constant temperature) dynamics were carried out to obtain density as a function of temperature for each composite system. The Tg was determined as the temperature corresponding to the discontinuity of plot slopes of the densityvsthe temperature. In order to understand the motion of polymer chain segments above and below the Tg, various energy components and the MSD at various temperatures of the composites were investigated and their roles played in the glass transition process were analyzed. The results show that the Tg of the composites increases with increasing aspect ratio of the embedded SWCNT

A Molecular Dynamics Simulation Study of the Mechanical Properties of Carbon-Nanotube Reinforced Polystyrene Composite

2014 ◽  
pp. 466-477
Author(s):  
Nabila Tahreen ◽  
K. M. Masud
Keyword(s):  
Molecular Dynamics ◽  
Carbon Nanotube ◽  
Longitudinal Direction ◽  
Md Simulations ◽  
Dynamics Simulation ◽  
Minimization Method ◽  
Polymer Properties ◽  
Polystyrene Matrix ◽  
Nanotube Composites ◽  
Strain Energy Minimization

In recent years, polymer/carbon nanotube composites have attracted increased attention because the polymer properties have significantly improved. In this paper, a single walled carbon nanotube (SWCNT) is used to reinforce polystyrene matrix. Molecular dynamics (MD) simulations are used to study two periodic systems - a long CNT-reinforced polystyrene composite and amorphous polystyrene matrix itself. The axial and transverse elastic moduli of the amorphous polystyrene matrix and nanocomposites are evaluated using constant-strain energy minimization method. The results from MD simulations are compared with corresponding rule-of-mixture predictions. The simulation results show that CNTs significantly improve the stiffness of polystyrene/CNT composite, especially in the longitudinal direction of the nanotube. Polystyrene posses a strong attractive interaction with the surface of the SWCNT and therefore play an important role in providing effective adhesion. The conventional rule-of-mixture predicts a smaller value than MD simulation where there are strong interfacial interactions. Here the authors report a study on the interfacial characteristics of a CNT-PS composite system through MD simulations and continuum mechanics.

Sign in / Sign up

Export Citation Format

Share Document