scholarly journals A study on municipal leachate treatment through a combination of biological processes and ozonation

2019 ◽  
Vol 276 ◽  
pp. 06030 ◽  
Author(s):  
Iva Yenis Septiariva ◽  
Tri Padmi ◽  
Enri Damanhuri ◽  
Qomarudin Helmy
Keyword(s):  
Treatment Process ◽  
Biological Process ◽  
Cod Removal ◽  
Batch Reactors ◽  
Biological Processes ◽  
Solid Waste Disposal ◽  
Leachate Treatment ◽  
Pre Treatment ◽  
Aerobic And Anaerobic ◽  
Post Treatment Process

Landfill is the most commonly method of municipal solid waste disposal in many countries. This practice has great potential to produce highly polluted leachate in massive quantities, which can cause environmental contamination. Biological processes are known as a common method to treat municipal leachate however this process alone in is less effective, especially in reducing the concentration of organic pollutants (BOD5/COD ratio). Leachate properties are site-specific and greatly influenced by landfill age. This study focuses on the investigation of treatment methods that can increase the extent of leachate biodegradability by applying an ozone concentration of 2.5 mg/L with up to 360 minutes of contact time. In this study, batch reactors were used and operated in anaerobic and aerobic conditions. The leachate used here represents both young and old leachate. Several treatment combinations were compared: Variation I (a combination of biologically aerobic and anaerobic process), Variation II (ozonation included as a pre-treatment process), and Variation III (ozonation was included as a post-treatment process). The results suggest that the BOD5/COD ratios of young and old leachates were 0.58 and 0.21, respectively. The COD removal for a young and old leachate treatment by biological process alone was 96.8% and 50.8%, respectively. Meanwhile, a combination of anaerobic-ozonation-aerobic processes gave better COD removal. Ozonation had a significant effect on the old leachate treatment, where the COD removal rose from 50.8% to 75%. Ozonation is a type of technology that can be applied to a subsequence treatment of biological processes in order to elevate the COD removal efficiency.

scholarly journals Application of Anaerobic and Ozonation Processes in the Landfill Leachate Treatment

2006 ◽  
Vol 1 (3) ◽  
Author(s):  
A. Vilar ◽  
S. Gil ◽  
M. A. Aparicio ◽  
C. Kennes ◽  
M. C. Veiga
Keyword(s):  
Organic Matter ◽  
Landfill Leachate ◽  
Biological System ◽  
Contact Time ◽  
Treatment Process ◽  
Tap Water ◽  
Leachate Treatment ◽  
Ozone Dose ◽  
Pre Treatment ◽  
Ozonation Process

The optimization of leachate treatment was investigated as well as the configuration of a biological-ozonation process. The leachate used for the experiments was diluted to 1/5 with tap water and treated anaerobically. The anaerobic effluent and the raw leachate were treated with ozone in order to increase their biodegradability getting the minimum organic matter removal. Both were submitted to the ozonation process, applying a constant ozone dose and varying the contact time. The ozonation of raw leachate produced a decrease of COD and BOD5 concentrations as well as BOD5/COD ratios, applying an ozone dose of 38.72 mg/L·min and contact times between 15 and 60 minutes. Ozonation as a pre-treatment process to the biological system did not improve the biodegradability of the raw leachate. The anaerobic effluent from the reactor fed with leachate diluted to 1/5, was subjected to an ozone dose of 34.99 mg/L·min and applying different contact times. BODf values increased from 74.75 up to 1220 mg/L and BODf/COD ratios reached values higher than 1. Then, the application of ozone to the anaerobic effluent led to the improvement of the biodegradability of the leachate as well as the BODf/COD ratio for all the contact times used.

Biological Treatment Technology for Landfill Leachate

2015 ◽  
pp. 219-249
Author(s):  
Husnul Azan Bin Tajarudin ◽  
Mohd Firdaus Bin Othman ◽  
Noor Aziah Binti Serri ◽  
Muhammad Redzwan Bin Tamat
Keyword(s):  
Landfill Leachate ◽  
Biological Treatment ◽  
Biological Process ◽  
Low Cost ◽  
New Technology ◽  
Environmentally Friendly ◽  
Biological Processes ◽  
Treatment Technology ◽  
Leachate Treatment ◽  
Environmental Preservation

Biological process for environmental preservation and treatment is not a new technology. It was used a decade ago until now. The most important tools in biological processes are the microorganism and upstream instruments (bioreactor, pond and others) to run the process. Furthermore, the efficiency of the process depends on many factors such as temperature, pH, type of microorganism, conditions, and other nutrients. To understand the factors that will affect the process, mechanisms of microorganisms to treat or protect the environment must be considered. For leachate treatment, biological process is one of the most widely used techniques for low cost and environmentally friendly.

Biological Treatment Technology for Landfill Leachate

2020 ◽  
pp. 775-806
Author(s):  
Husnul Azan Bin Tajarudin ◽  
Mohd Firdaus Bin Othman ◽  
Noor Aziah Binti Serri ◽  
Muhammad Redzwan Bin Tamat
Keyword(s):  
Landfill Leachate ◽  
Biological Treatment ◽  
Biological Process ◽  
Low Cost ◽  
New Technology ◽  
Environmentally Friendly ◽  
Biological Processes ◽  
Treatment Technology ◽  
Leachate Treatment ◽  
Environmental Preservation

Biological process for environmental preservation and treatment is not a new technology. It was used a decade ago until now. The most important tools in biological processes are the microorganism and upstream instruments (bioreactor, pond and others) to run the process. Furthermore, the efficiency of the process depends on many factors such as temperature, pH, type of microorganism, conditions, and other nutrients. To understand the factors that will affect the process, mechanisms of microorganisms to treat or protect the environment must be considered. For leachate treatment, biological process is one of the most widely used techniques for low cost and environmentally friendly.

scholarly journals Comparison of in Batch Aerobic and Anaerobic Processes for the Degradation of Organic Matter in a Tropical Reservoir

2020 ◽  
Vol 29 (54) ◽  
pp. e10892
Author(s):  
Johanna Elvira Rodríguez-Ballesteros ◽  
Diana Catalina Rodriguez-Loaiza ◽  
Gustavo Antonio Peñuela-Mesa
Keyword(s):  
Organic Matter ◽  
Greenhouse Gases ◽  
Physicochemical Parameters ◽  
Plant Material ◽  
Polymer Chains ◽  
Batch Reactors ◽  
Biological Processes ◽  
Tropical Reservoir ◽  
Anaerobic Processes ◽  
Aerobic And Anaerobic

The decomposition of submerged organic matter after the flooding process of a reservoir and the organic matter transported by the tributaries that supply it, gives rise to the formation of greenhouse gases (GHG), such as CO2 and CH4, product of the aerobic and anaerobic biological processes that take place both on the surface and at the bottom of the reservoir. In this study, the dynamics of aerobic and anaerobic processes as well as the generation of greenhouse gases in the degradation of organic matter, present in a tropical reservoir, were compared. Batch reactors and plant material extracted from the protection strip were used. Likewise, the behavior of the variation of the COD, physicochemical parameters such as pH, dissolved oxygen, redox potential, and conductivity were evaluated, and the kinetic constants that represent the behavior of organic matter were defined. The results showed that the degradation of the organic material leads to the generation of GHG, however, when using water plus vegetal material, the GHG increased considerably after a time. This process is due to the fact that the plant material suffers the breakdown of its polymer chains and so it degrades more quickly, which increases the concentration of organic matter available to microorganisms. GHG values ​​were on average 10.290 g CO2eq/m2.d with water only, and 24.536 g CO2eq/m2.d with water and vegetal material for aerobic processes. In anaerobic processes, the values were on average 12.056 g CO2eq/m2.d with water only, and 33.470 g CO2eq/m2.d with water plus vegetal material. These laboratory scale results allow analyzing the behavior of the reservoir and the incidence of flooded plant material on GHGs.

Pond Treatment of Rettery Wastewaters

1987 ◽  
Vol 19 (12) ◽  
pp. 79-83
Author(s):  
K. Bartoszewski ◽  
A. Bilyk
Keyword(s):  
Activated Sludge ◽  
Treatment Process ◽  
New Technology ◽  
Treatment Plant ◽  
Anaerobic Treatment ◽  
Cod Removal ◽  
Experimental Results ◽  
Aerobic Conditions ◽  
Aerobic Stabilization ◽  
In Series

Rettery wastewaters were treated in anaerobic and aerobic ponds. Anaerobic treatment yielded efficiencies of BOD5 and COD removal as low as 20%. The treatment process conducted under aerobic conditions in aerated and stabilizing ponds arranged in series took from 18 to 20 days and gave efficiencies of BOD5 and COD removal amounting to 90%. The experimental results were interpreted by virtue of the Eckenfelder equation. Excess activated sludge was subjected to aerobic stabilization in a separate tank. A new technology was suggested for the existing obsolete industrial treatment plant.

Reuse of Wastewaters in Agriculture by Means of Sprinkler Irrigation on a Farmland Area of 3000 ha – Large Scale Experience in Germany

1986 ◽  
Vol 18 (9) ◽  
pp. 163-173
Author(s):  
R. Boll ◽  
R. Kayser
Keyword(s):  
Large Scale ◽  
Treatment Process ◽  
Treatment Plant ◽  
Sprinkler Irrigation ◽  
Paper Briefly ◽  
Treatment Results ◽  
Sewage Farm ◽  
Western Germany ◽  
Pre Treatment ◽  
Main Components

The Braunschweig wastewater land treatment system as the largest in Western Germany serves a population of about 270.000 and has an annual flow of around 22 Mio m3. The whole treatment process consists of three main components : a pre-treatment plant as an activated sludge process, a sprinkler irrigation area of 3.000 ha of farmland and an old sewage farm of 200 ha with surface flooding. This paper briefly summarizes the experiences with management and operation of the system, the treatment results with reference to environmental impact, development of agriculture and some financial aspects.

Approach to the Reforms in Nightsoil Treatment Process Introduced Abroad

1991 ◽  
Vol 24 (5) ◽  
pp. 189-196 ◽  
Author(s):  
S. B. Guo ◽  
R. Z. Chen ◽  
G. Li ◽  
H. Y. Shoichi
Keyword(s):  
Treatment Cost ◽  
Treatment Process ◽  
Biological Process ◽  
Treatment Plant ◽  
Plant Performance ◽  
First Year ◽  
Original Design ◽  
Effluent Quality ◽  
Public Toilets

In 1987 Guangzhou Liede Nightsoil Treatment Plant started commissioning. The purpose of the plant is to dispose of 400 tons of nightsoi1 from city public toilets per day. In the first year of the commissioning a biological process was basically used according to the original design made by a Danish company. Practically it has been proved that the design is effective. The process can reduce BOD from 3800 mg/l to about 133 mg/l, or by approximately 96.5 percent. The performance of the sludge digester system is satisfactory. Because the primary investigation on characteristics of the nightsoil was insufficient there were some problems raised during the commissioning. So in the first year the effluent failed to achieve the desired quality. After the analysis of the plant performance some necessary reforms have been carried out. Now the effluent quality can stably meet the national discharge limits and the treatment cost decreases.

Vivianite Occurrence and Remediation Techniques in Biosolids Pre-treatment Process

2018 ◽  
Vol 2018 (4) ◽  
pp. 103-117
Author(s):  
Bipin Pathak ◽  
Ahmed Al-Omari ◽  
Scott Smith ◽  
Nicholas Passarelli ◽  
Ryu Suzuki ◽  
...  
Keyword(s):  
Treatment Process ◽  
Pre Treatment

scholarly journals Bioethanolic yeasts from dung beetles: tapping the potential of extremophilic yeasts for improvement of lignocellulolytic feedstock fermentation

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Anita Ejiro Nwaefuna ◽  
Karl Rumbold ◽  
Teun Boekhout ◽  
Nerve Zhou
Keyword(s):  
Treatment Process ◽  
Dung Beetles ◽  
Production Costs ◽  
Industrial Wastes ◽  
Major Drawback ◽  
Renewable Fuel ◽  
Extreme Stress ◽  
Pre Treatment ◽  
The Cost ◽  
Simultaneous Saccharification

AbstractBioethanol from abundant and inexpensive agricultural and industrial wastes possesses the potential to reduce greenhouse gas emissions. Bioethanol as renewable fuel addresses elevated production costs, as well as food security concerns. Although technical advancements in simultaneous saccharification and fermentation have reduced the cost of production, one major drawback of this technology is that the pre-treatment process creates environmental stressors inhibitory to fermentative yeasts subsequently reducing bioethanol productivity. Robust fermentative yeasts with extreme stress tolerance remain limited. This review presents the potential of dung beetles from pristine and unexplored environments as an attractive source of extremophilic bioethanolic yeasts. Dung beetles survive on a recalcitrant lignocellulose-rich diet suggesting the presence of symbiotic yeasts with a cellulolytic potential. Dung beetles inhabiting extreme stress environments have the potential to harbour yeasts with the ability to withstand inhibitory environmental stresses typically associated with bioethanol production. The review further discusses established methods used to isolate bioethanolic yeasts, from dung beetles.

scholarly journals Integrative, multi-omics, analysis of blood samples improves model predictions: applications to cancer

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Erica Ponzi ◽  
Magne Thoresen ◽  
Therese Haugdahl Nøst ◽  
Kajsa Møllersen
Keyword(s):  
Lung Cancer ◽  
Biological Process ◽  
Case Control ◽  
Integrative Analysis ◽  
Data Sources ◽  
Omics Data ◽  
Biological Processes ◽  
Blood Samples ◽  
Model Predictions

Abstract Background Cancer genomic studies often include data collected from several omics platforms. Each omics data source contributes to the understanding of the underlying biological process via source specific (“individual”) patterns of variability. At the same time, statistical associations and potential interactions among the different data sources can reveal signals from common biological processes that might not be identified by single source analyses. These common patterns of variability are referred to as “shared” or “joint”. In this work, we show how the use of joint and individual components can lead to better predictive models, and to a deeper understanding of the biological process at hand. We identify joint and individual contributions of DNA methylation, miRNA and mRNA expression collected from blood samples in a lung cancer case–control study nested within the Norwegian Women and Cancer (NOWAC) cohort study, and we use such components to build prediction models for case–control and metastatic status. To assess the quality of predictions, we compare models based on simultaneous, integrative analysis of multi-source omics data to a standard non-integrative analysis of each single omics dataset, and to penalized regression models. Additionally, we apply the proposed approach to a breast cancer dataset from The Cancer Genome Atlas. Results Our results show how an integrative analysis that preserves both components of variation is more appropriate than standard multi-omics analyses that are not based on such a distinction. Both joint and individual components are shown to contribute to a better quality of model predictions, and facilitate the interpretation of the underlying biological processes in lung cancer development. Conclusions In the presence of multiple omics data sources, we recommend the use of data integration techniques that preserve the joint and individual components across the omics sources. We show how the inclusion of such components increases the quality of model predictions of clinical outcomes.

Sign in / Sign up

Export Citation Format

Share Document