scholarly journals Utility of nail enamel for inking of surgical margins in oral biopsy: a comparative study

2021 ◽  
Vol 28 (1) ◽  
pp. 4
Author(s):  
Suvarna Kizhakkoottu ◽  
Archana Santhanam ◽  
Herald. J. Sherlin ◽  
Gifrina Jayaraj ◽  
Kanchi Ravi Don

Background: India Ink is the most commonly used ink in surgical pathology. The main disadvantages of India Ink are longer drying time, monochrome, toxicity and cost. Because of these disadvantages, alternative materials have been suggested to replace India ink. The aim of this study is to evaluate the effectiveness of nail enamel for inking of surgical margin and to compare it with India ink. Materials and methods: N = 20, which included 10 mucosal and 10 skin samples. Each selected margin is divided into 2 equal halves and one is inked with India ink and the other with nail enamel (Vernis A Ongles: Dark green). After routine processing and staining, the effectiveness of nail enamel and India ink were compared based on macroscopic and microscopic parameters. Results: Less drying time and visibility on paraffin wax block were excellent for nail enamel. Microscopic visibility of nail enamel was comparable with that of India ink. However, processing fluids contamination is the main drawback of nail enamel. Conclusion: Nail enamel can be used as an alternative to India ink because of its less drying time, ease of application, good visibility on wax blocks and microscopically, availability in multiple colours, cost effectiveness and non-toxicity.

2015 ◽  
Vol 6 (1) ◽  
pp. 26-30 ◽  
Author(s):  
Anuprita Patil ◽  
Rahul Anand ◽  
Pratiksha Mahajan

ABSTRACT Objective To compare acrylic color and India ink for their use as a surgical margin. Since, acrylic paints are available in multiple colors, they can be used to mark different surgical margins with different specific colors. Materials and methods The study was carried out on 30 surgically excised and formalin fixed oral squamous cell carcinoma (OSCC) specimens. Four surgical margins of each 15 specimens were marked with India ink and the remaining were marked with acrylic colors. The grossed specimens were then processed using routine histopathology technique. The 4 mm sections of tissue block were cut using microtome and sections were stained with hematoxylin and eosin stain. Various macroscopic and microscopic parameters were used to study the suitability of acrylic color as surgical ink. Results Three different technicians found equal ease of application for acrylic color and India ink. The drying time for acrylic color (1.30 ± 0.009 minutes) was significantly less than India ink (2.30 ± 0.05 minutes). Out of total 60 blocks made for acrylic colors, 52 (86.66%) displayed clear visibility on paraffin blocks (93.33%). In contrast, out of 60 blocks made for India ink, only 34 showed faint visibility on paraffin blocks (56.66%). All acrylic colors were visible very clearly and uninterruptedly under the microscope, while three (5%) surgical margins stained with India ink were interrupted. With the acrylic colors, no contamination or staining of other tissues, processing fluids and solutions were reported. However, with India ink, three (5%) samples reported contamination in alcohol and xylene. There was no interference with the microscopic interpretation of nuclear and cellular details for both acrylic color and India ink whatsoever. Conclusion Acrylic colors are more suitable as surgical ink over India ink because of its availability in different colors, ease of application, faster drying time, and no contamination with processing fluids, easy availability and excellent visibility on paraffin blocks and under microscope. Moreover, if needed, painting with multiple colors could also help in reassessment of surgical margins of the gross specimen in the future. How to cite this article Sarode SC, Sarode GS, Patil S, Mahajan P, Anand R, Patil A. Comparative Study of Acrylic Color and India Ink for Their Use as a Surgical Margin Inks in Oral Squamous Cell Carcinoma. World J Dent 2015;6(1):26-30.


1874 ◽  
Vol 1 (1) ◽  
pp. 1-2
Author(s):  
Edward Hull

This granite forms an isolated mass, rising into two eminences a few miles south of Louisburg, called Corvock Brack (1287 feet) and Knockaskeheen (1288 feet). It is a greyish granite—generally fine—grained—consisting of quartz, two felspars,—one orthoclase, the other triclinic, probably oligoclase—and dark green mica. In some places there are patches in which the felspar assumes the appearance of “graphic granite.” Numerous boulders of this granite are strewn over the district to the north-west, and on the south side of Knockaskeheen; the rock is traversed by regular joints ranging N. 10 W., along which it splits off into nearly vertical walls. The position of the granite is shown on Griffith's Geological Map of Ireland, and it is surrounded by schistose beds, generally metamorphosed, and probably of Lower Silurian age. The granite itself is of older date than the Upper Llandovery beds, which lie to the southward.


1883 ◽  
Vol 36 (228-231) ◽  
pp. 285-286

After the reading of the note on chlorophyll at the meeting of the society on December 13th, I was reminded by Professor Stokes that e and others had succeeded in separating the complex to which the erm chlorophyll had previously been applied into two substances, or ather groups of substances, one characterised by its green colour and ed fluorescence, the other showing a more distinctly yellow colour without fluorescence, and he suggested to me that it would be advisable to ascertain whether the property of yielding glucose by decomposition with acids might not belong to one of these substances or groups of substances only. Professor Stokes at the same time kindly communicated to me the details of the process whereby he succeeded n effecting the separation referred to, a process depending on the action of carbon disulphide in' removing some of the bodies contained n an alcoholic solution of crude chlorophyll in preference to others. The process employed for the same purpose by Mr. Sorby is essentially the same. Before applying disulphide of carbon to an alcoholic extract of green leaves according to the process of Professor Stokes, it was necessary first to remove the ready-formed glucose, tannin, and other matters soluble in water, which almost always exist in such extracts, and which would by their presence have rendered the result of the experiment quite uncertain. This was done in the way I have already described. An ethereal solution of chlorophyll prepared by my method was evaporated, and the residue having been dissolved in alcohol, the solution was mixed with a quantity of carbon disulphide larger than the alcohol would dissolve, and the mixture well shaken. The carbon disulphide acquired a dark green colour, while the supernatant alcoholic liquid, containing principally the xanthophyll of Professor Stokes and Mr. Sorby, was yellow with a tinge of green. The two liquids having been separated, the lower dark green one was washed several times with alcohol to remove any of the xanthophyll that might still be present, and having then been mixed with a large quantity of alcohol, a current of air was passed through it to remove the excess of carbon disulphide as directed by Professor Stokes. In this way I obtained two liquids, one intensely green, the other deep yellow with only a tinge of green. The two liquids were found to contain substances essentially different so far as regards their products of decomposition with acids. The yellow liquid having been mixed with dilute sulphuric acid was evaporated in the waterbath, water being added during evaporation, until the liquid had lost nearly all its colour. A quantity of yellow fatty matter separated during evaporation, and this having been filtered off the liquid was found to contain an abundance of glucose. The yellow fatty matter insoluble in water, dissolved easily in alcohol, but the yellow solutio showed none of the characteristic absorption bands of “acid chloro phyll.” The dark green liquid, treated in exactly the same way yielded a dark green product insoluble in water. The filtrate Iron this gave a slight reaction with Fehling’s solution, but so trifling comparatively that I am inclined to attribute it to the presence o some substance not completely removed from the disulphide of carboi solution by washing with alcohol. The dark green product of tin action of acid insoluble in water was soluble, though with difficultyin boiling alcohol, the solution being dull green and showing the absorption bands due to “acid chlorophyll.” If, therefore, chloro phyll be defined as the constituent of the green parts of plants, which gives a spectrum showing the well-known bands at the red end, and yields by decomposition with acids the product or products going by the name of “acid chlorophyll,” of which Fremy’s phyllocyanin is the most important and most characteristic, then chlorophyll is not a glucoside. The glucoside which accompanies it and resembles it as regards solubility in various menstrua may have to be sought among the group of bodies to which the generic name of xanthophyll has been applied.


2020 ◽  
Vol 2 (1) ◽  
pp. 17-25
Author(s):  
Ivan Santoso ◽  
Tria Prayoga ◽  
Ika Agustina ◽  
Wiwit Setya Rahayu

Aloe vera (Aloe Vera L.) is a plant which commonly used by local people as moisturizer. The usage of aloe vera can be applied in form of peeled off gel mask with polyvinyl alcohol as gelling agent. The goal of this research is to determine the influence of increase of polyvinyl alcohol as gelling agent to the formulation of peeled off mask from aloe vera juice. The formulation was made in a few concentration, 10%, 12%, and 14% by adding 0,5% of aloe vera juice. After that, the formulation evaluated for 4 weeks about the organoleptics, homogenity, pH, drying time and viscosity. The date of pH test and drying time analyzed by using one way ANOVA statistically and then followed by Tukey HSD test and the viscosity analyzed by using Kruskall Wallis statistically which result in the significantcy less than 0,05 that mean there are difference in drying time and viscosity, on the other hand there is no difference in pH.


Author(s):  
Munawar A Riyadi ◽  
Irawan D Sukawati ◽  
Teguh Prakoso ◽  
Darjat Darjat

The recent progress of dimension scaling of electronic device into nano scale has motivated the invention of alternative materials and structures. One new device that shows great potential to prolong the scaling is junctionless FET (JLFET). In contrast to conventional MOSFETs, JLFET does not require steep junction for source and drain. The device processing directly influence the performance, therefore it is crucial to understand the role of gate processing in JLFET. This paper investigates the influence of gate material and process on subthreshold performance of junctionless FET, by comparing four sets of gate properties and process techniques. The result shows that in terms of subthreshold slope, JLFET approaches near ideal value of 60 mV/decade, which is superior than the SOI FET for similar doping rate. On the other hand, the threshold value shows different tendencies between those types of device.


2017 ◽  
Vol 48 (1) ◽  
pp. 75-77 ◽  
Author(s):  
Felix Bongomin
Keyword(s):  

1910 ◽  
Vol 3 (3) ◽  
pp. 297-300 ◽  
Author(s):  
Jacob G. Lipman

Several years ago the writer's attention was called to the apparently favourable influence of field peas on oats when the two were grown together. The rank growth of the oats, their dark-green colour and the delayed ripening gave every indication of an abundant supply of available nitrogen compounds. On the other hand, oats seeded without the peas, at about the same time, were less rank in their growth and matured at an earlier date. Further observation and inquiry strengthened the impression in the writer's mind that the associative growth of legumes and non-legumes is frequently advantageous to the latter in that they are supplied with nitrogen compounds derived either from the decay of the fibrous roots of the legumes, or from the soluble materials passing out of the roots into the surrounding soil.


1953 ◽  
Vol 43 (4) ◽  
pp. 422-431 ◽  
Author(s):  
Marca Burns

The follicle population of the Blackface breed (‘double-coated’) was followed in skin samples taken from four lambs at eight intervals between 3 days and 43 weeks of age. The follicle population differs greatly from that of the Romney and Leicester breeds previously studied (Burns, 1949).1. At 1 month old the secondary/primary follicle ratio (S/P) was slightly lower than the Leicester and much lower than the Romney, and the difference became accentuated with age.2. Fewer secondary follicles are developed after birth than in the Leicester or Romney, although the period during which they can be developed is longer, extending at least to 12 and possibly to 17 weeks after birth.3. The follicle density is less than half that of the Leicester, but the difference in S/P ratio is not sufficiently large to account for this, which is mainly due to the Blackface having a much lower density of primary follicles at birth.4. The possibility is suggested that the secondary follicles arise as a result of ‘induction’ by ‘follicle organizer’ coming from primary follicles in a quantity which decreases with advancing age. It may be that when the primary density is high the areas affected by organizer from each primary overlap, providing sufficient organizer to permit of numerous secondary follicles developing at a late post-natal stage, as reported in the Merino.5. The Blackface contrast with the other breeds in that its primary follicles are conspicuously larger than its largest secondary follicles. All primary fibres are medullated except when about to shed, but many secondary fibres are free of medulla. Kemps are produced only by primary follicles, some of which however produce long ‘hair’ fibres.6. Many fibres which grow strongly medullated fibres during summer change to the production of non-medullated fibres in winter. The shedding of the kemps in spring should probably be looked upon as physiologically an autumn moult, since the fibres cease growth and produce ‘brushes’ during the autumn.


2021 ◽  
Author(s):  
Amrapali Rajput ◽  
Shipeng Zhou ◽  
Madhava Meegaskumbura

It is known that animal-associated microbiomes form indispensable relationships with hosts and are responsible for many functions important for host-survival. Next-gen driven approaches documenting the remarkable diversity of microbiomes have burgeoned, with amphibians too, benefiting from such treatments. The microbiome of Gymnophiona (caecilians), one of the three amphibian orders, constituting of 3% of amphibians, however, remains almost unknown. The present study aims to address this knowledge gap through analysis of the microbiome of Ichthyophis bannanicus. As these caecilian larvae are aquatic and hence exposed to a greater propensity for bacterial microbiomic interchange, we hypothesize that bacterial phyla would overlap between gut and skin. Further, from the host-specificity patterns observed in other vertebrate taxa, we hypothesize that Gymnophiona have different dominant gut bacterial microbiomes at a higher taxonomic level when compared to the larvae of the other two amphibian orders (Anura and Caudata). We used 16S rRNA gene amplicon sequencing based on Illumina Nova sequencing platform to characterize and compare the gut (represented by faecal samples) and skin microbiome of I. bannanicus larvae (N = 13), a species distributed across South-East-Asia and the only caecilian species occurring in China. We compared our gut microbiome results with published anuran and caudate larval microbiomes. For I. bannanicus, a total of 4,053 operational taxonomic units (OTU) across 13 samples were detected. Alpha-diversity indices were significant between gut and skin samples. Non-metric multidimensional scaling analysis suggest that gut and skin samples each contained a distinct microbiome at OTU level. We record significant differences between the bacterial phyla of gut and skin samples in larvae of I. bannanicus. The study provides an overview of gut and skin bacterial microbiomes of a caecilian, while highlighting the major differences between larval microbiomes of the three amphibian orders. We find a partial overlap of gut bacterial microbiomes at phylum level for the three orders; however, the relative abundance of the dominant phyla is distinct. The skin and gut microbiomes are distinct with little overlap of species, highlighting that gut-skin axis is weak. This in turn suggests that many of the microbial species on skin and gut are functionally specialized to those locations. We also show that the skin microbiome is more diverse than the gut microbiome at species level; however, a reason for this could be a portion of the gut microbiome not being represented in faecal samples. These first microbiome information from a caecilian lay the foundation for comparative studies of the three amphibian orders.


HortScience ◽  
2014 ◽  
Vol 49 (11) ◽  
pp. 1381-1391 ◽  
Author(s):  
Hai-Fang Yang ◽  
Hye-Ji Kim ◽  
Hou-Bin Chen ◽  
Jillur Rahman ◽  
Xing-Yu Lu ◽  
...  

Litchi trees flower at the apex of terminal shoots. Flowering is affected by the maturity of terminal shoots before growth cessation occurs during the winter. In this study, we focused on changes of flowering in three important cultivars, Guiwei, Feizixiao, and Huaizhi, from Dec. 2012 to Mar. 2013 under natural winter conditions. Flowering rate, carbohydrate accumulation, and expression of the flowering-related genes were determined at three different developmental stages of terminal shoots with dark green, yellowish green and yellowish red leaves, respectively. The results showed that the total soluble sugar and starch contents in the dark green leaves were the highest, whereas those in the yellowish red leaves were the lowest. Trees with dark green terminal shoots had the highest flowering rates, whereas those with yellowish green or yellowish red shoots had relatively lower flowering rates. SPAD was highest in dark green leaves and lowest in yellowish red leaves at the start of the trial. The SPAD value of yellowish red leaves slightly increased but did not reach the levels of the dark green leaves, whereas levels of the other leaf stages remained fairly constant. Expression level of the litchi homolog FLOWERING LOCUS C (LcFLC), the floral inhibitor in yellowish red leaves, increased from 16 Jan., whereas that in dark green leaves declined to a level lower than the yellowish red leaves on 4 Feb. Expression level of the litchi homolog CONSTANTS (LcCO), the floral promoter in dark green leaves, was higher than that of yellowish red leaves before 26 Jan. Expression level of the litchi homolog FLOWERING LOCUS T 2 (LcFT2), encoding florigen, was higher in dark green leaves than in the other two leaf types. Our results suggest that terminal shoots should be matured and leaves should turn green for successful flowering. Mature leaves had higher expression levels of the floral promoter and florigen. In litchi production, leaves of the terminal shoots (potential flowering branches) should be dark green during floral induction and differentiation stages, and winter flushes should be removed or killed.


Sign in / Sign up

Export Citation Format

Share Document