Interfacial reactions between impurities and slag onset of Si purification by slag addition

2021 ◽  
Vol 119 (1) ◽  
pp. 101
Author(s):  
Yaqiong Li ◽  
Yunlong Yu ◽  
Lifeng Zhang ◽  
Zhengtao Li

The interfacial reactions between impurities (Al and Ti) and slag onset of Si purification by 51 mol% SiO2–34 mol% CaO–15 mol% MgO slag addition were studied to enhance impurity removal efficiency from Si. The Al distribution behavior at the Si/Slag interface was investigated; a short reaction time (10 s) resulted in the formation of successive SiO2–CaO–MgO–Al2O3 layers in the slag with a thickness of 10 µm; increasing the reaction time (60 s) resulted in the entire ternary slag being changed into SiO2–CaO–MgO–Al2O3 quaternary slag due to the diffusion of Al2O3. It was shown that the highest impurity removal rate of Al could be achieved at the onset of the slag refining process. Based on the Ti distribution at the Si/slag interface, the slag refinement with 51 mol% SiO2–34 mol% CaO–15 mol% MgO had no effect on Ti removal.

2013 ◽  
Vol 295-298 ◽  
pp. 1307-1310
Author(s):  
Xi Tian ◽  
Ming Xin Huo ◽  
De Jun Bian ◽  
Sheng Shu Ai ◽  
Qing Kai Ren

The wastewater produced from the polytetrahydrofuran (PolyTHF) was treated with iron-carbon micro electrolysis process. This paper had studied the COD removal efficiency influences of primary PH value, reaction time, the quality ratio of the iron-carbon, the quality and volume ratio of Fe-wastewater. The results show that when pH value is 3, the quality ratio of the iron-carbon is 11 and the quality and volume ratio of Fe and wastewater is 17 with contact time of 90 min, the wastewater COD removal rate can reach as high as 95.0%.


2012 ◽  
Vol 217-219 ◽  
pp. 843-848
Author(s):  
Lei Lei Hou ◽  
Yu Qi Wang ◽  
Tie Gao ◽  
Jia Jing Jiang

Use single and coexistence of simulated mine water contains Fe2+ and Mn2+ as processing object, the new NWMO medicament on Fe2+ and Mn2+’s removal efficiency, NWMO dosage, pH, reaction time and temperature on NWMO’s removal efficiency were investigated. When treated mine water only contains Fe2+, the appropriate conditions of the factors are that NWMO dosage/Fe2+ content=19:1, pH=5, room temperature, the reaction time is 10min, and the removal rate of Fe2+ is more than 80%; When treated mine water only contains Mn2+, the appropriate conditions of the factors are that NWMO dosage/Mn2+ content=22:1, pH=6, 35°C, the reaction time is 10min, the removal rate of Mn2+ is more than 60%; When the processing of Fe2+ and Mn2+ coexistence of mine water, the appropriate conditions of the factors are that NWMO dosage/Fe2+content=19:1, Fe2+ content/Mn2+ content=5:1, pH=6, 35°C, the reaction time is 10min, the removal rate of Fe2+ can be as high as 100%, and the highest Mn2+ removal rate can amount to 75%. In view of the current mine water quality characteristics that contains Fe2+ and Mn2+, the NWMO medicament is very suitable, and can achieve quick and efficient removal of iron and manganese.


2021 ◽  
Vol 118 (2) ◽  
pp. 216
Author(s):  
Yaqiong Li ◽  
Lifeng Zhang ◽  
Xinyu Cai ◽  
Ying Zhang ◽  
Ligang Liu ◽  
...  

Impurity removal from Cu-Zn (brass) alloy is an important issue for copper feedstock production. This study investigated brass alloy purification through the slag refining process using two kinds of agents, namely Cu2O and ZnO. The results showed that using ZnO as the slag to purify brass alloy for 1 h can remove impurities, such as Al, Pb, Fe, Ca, and Si, among which the removal efficiencies of Si reached to 60%. After the ZnO slag refining, the Zn loss ratio was only approximately 2%; thus, the brass alloy composition remained stable. The slag refining process using ZnO-contained slag did not only realize brass purification, but also maintained the brass composition stability.


2011 ◽  
Vol 287-290 ◽  
pp. 1789-1794 ◽  
Author(s):  
Min Li ◽  
Yan Zhi Sun ◽  
Cai Ying Li ◽  
Ping Yu Wan

The present paper studies the removal of the nitrogen in the form of nitrate in water by electrochemical catalysis reduction. The influence of electrode materials and various test conditions on the removal efficiency was studied. The experimental results show that the removal rate of nitrate can reach above 90% by using a three-dimensional permeable electrode of Fe-Si alloy under the condition of flowrate of 600ml/h, current density of 10mA/cm2and reaction time of 2h.


2013 ◽  
Vol 726-731 ◽  
pp. 2604-2608
Author(s):  
Ying Hong Xiang ◽  
Yang Yang Zhong ◽  
Xiang Dong Li ◽  
Jun Ke Song

The organic compounds in radioactive wastewater were treated using ozone oxidation technology. The influence of pH, ozone dosage, reaction time, initial COD, H2O2 on the removal of COD by ozone was investigated. The results showed that the removal efficiency of COD in the alkaline condition was higher than that of acidic condition, the COD removal rate increased with increasing ozone dosage, reaction time, H2O2 dosage, decreased with increasing initial COD. Under the conditions of COD 362 mg/L, pH value 9.0, ozone dosage 7.86 mg•L-1•min-1, reaction time 30 min , the removal rate of COD was 25.9%; the removal rate of COD increased to 37.8% when 0.2 ml H2O2 was added in addition.


2020 ◽  
Author(s):  
Katsuya Maruyama ◽  
Takashi Ishiyama ◽  
Yohei Seki ◽  
Kounosuke Oisaki ◽  
Motomu Kanai

A novel Tyr-selective protein bioconjugation using the water-soluble persistent iminoxyl radical is described. The conjugation proceeded with high Tyr-selectivity and short reaction time under biocompatible conditions (room temperature in buffered media under air). The stability of the conjugates was tunable depending on the steric hindrance of iminoxyl. The presence of sodium ascorbate and/or light irradiation promoted traceless deconjugation, restoring the native Tyr structure. The method is applied to the synthesis of a protein-dye conjugate and further derivatization to azobenzene-modified peptides.


2020 ◽  
Vol 17 (6) ◽  
pp. 438-442
Author(s):  
Xiaofang Ma ◽  
Shunxi Li ◽  
Samrat Devaramani ◽  
Guohu Zhao ◽  
Daqian Xu

The elimination of volatile organic solvents in organic synthesis is the most important goal in “Green” chemistry. We report a simple, efficient and facile method for the addition of progargyl bromide to carbonyl compounds using Mg metal as a mediator under solvent-free conditions which could regioselectively generate homopropargyl alcohols efficiently in good to excellent yields. The procedure has advantages such as short reaction time, operationally simple, excellent product yields, high regioselectivity and organic solvent-free.


2019 ◽  
Vol 16 (8) ◽  
pp. 676-682
Author(s):  
Ankusab Noorahmadsab Nadaf ◽  
Kalegowda Shivashankar

The polycyclic dihydropyridine nucleus represents the heterocyclic system of invaluable core motifs with wide applications in chemical, biological and physical properties. Although this kind of compounds have been extensively synthesized by other groups, the synthesis of these compounds under CFL light intensity were not explored. The synthesis of polycyclic dihydropyridine derivatives were achieved through the reaction of 4-hydroxycoumarin, aromatic aldehydes and ammonium acetate under CFL light irradiation conditions. A series of polycyclic dihydropyridine derivatives were prepared under CFL light irradiation conditions with high yield, short reaction time, ambient condition and without the use of catalyst. The results displayed an efficient method for the synthesis of polycyclic dihydropyridine derivatives. Clean profile, short reaction time, low cost and use of CFL light intensity instead of catalyst making it a genuinely green protocol.


2020 ◽  
Vol 7 (2) ◽  
pp. 145-156
Author(s):  
Pravinkumar Patil ◽  
Gangadhar Bhopalkar ◽  
Sainath Zangade

Background: The various industrial processes have a diverse effect on the environment through pollution. In view of these observations, some environmentally benign synthetically protocols have developed under green chemistry. For rapid and sustainable synthesis, the microwave irradiation (MI) has gained popularity as a powerful tool compared to conventional synthesis. The present study describes the synthesis of novel substituted 1, 3-diaryl-2-propene-1-one derivative using alumina supported K3PO4-MWI combination. Objective: Chalcones are important compounds which are widely spread in nature like in fruits, vegetables, tea, spices, etc. The 2’-hydroxy derivative of chalcones plays an important role in the synthesis of bioactive compounds. The present communication deals with a convenient and rapid synthesis of 1, 3-diaryl-2-propene-1-one under the support of alumina-tripotassium phosphate and microwave irradiation. Our efforts are focused on the introduction of typical and easier route for the synthesis of title compounds using a microwave. All synthesized chalcones have been screened and evaluated for the antioxidant activity by DPPH and nitric oxide radical scavenging. Some of these compounds are found to be more potent scavengers and may lead to the development of a new class of antioxidants. Methods: The α, β-unsaturated carbonyl functionality contains two electrophilic centers allowing them to undergo addition and cyclization reactions with different nucleophiles. In the literature survey, we found that Chalcones were synthesized using tripotassium phosphate catalyst under refluxing by a conventional method. A novel method for the synthesis of 1, 3-diaryl-2-propene-1-one via Claisen Schmidt has been introduced by reacting substituted 2’- hydroxyl acetonaphthones with substituted aromatic aldehydes under the support of basic alumina –tripotassium phosphate via microwave radiations. Formation of corresponding Chalcones was confirmed by spectral studies followed by their screening for antioxidant activity. The scavenging activity is expressed in terms of % inhibition and IC50 value (μg/ml). Results: The structures of newly synthesized Chalcones were confirmed and in good agreement with obtained spectral analysis such as IR, NMR, Mass and elemental analysis. Commercially available basic alumina and tripotassium phosphate in combination of microwave were utilized and found to be effective, convenient route for the synthesis of 1, 3-diaryl-2-propene-1-one derivatives with desirable yields in short reaction time (5-12 min). The results of antioxidant activity revealed that the IC50 value for compounds 3a, 3d, 3e, 3f, 3g, 3h, 3j, 3l and 3n are lower than that of standard ascorbic acid to scavenge DPPH radical. This indicates that these compounds are more significant scavengers in comparison with standard drug. On the other hand, compounds 3a, 3b, 3c, 3d, 3g, 3l and 3n are more potent scavengers for NO free radical. Conclusion: We have introduced an efficient, ecofriendly, simple and fast microwave assisted method using basic alumina-tripotassium phosphate for the synthesis of 1, 3-diaryl-2-propene-1- one derivatives. Microwave irradiation provides an effective way for the preparation of Chalcones in terms of several advantages as a simple procedure, short reaction time, milder reaction condition, cleaner reaction and excellent yield. The scavenging activity of chalcones against DPPH and NO free radicals showed excellent properties of antioxidants.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mohammad Hossein Abdollahi-Basir ◽  
Boshra Mirhosseini-Eshkevari ◽  
Farzad Zamani ◽  
Mohammad Ali Ghasemzadeh

AbstractA one-pot three component reaction of benzaldehydes, 1H-tetrazole-5-amine, and 3-cyanoacetyl indole in the presence of a new hexamethylenetetramine-based ionic liquid/MIL-101(Cr) metal–organic framework as a recyclable catalyst was explored. This novel catalyst, which was fully characterized by XRD, FE-SEM, EDX, FT-IR, TGA, BET, and TEM exhibited outstanding catalytic activity for the preparation of a range of pharmaceutically important tetrazolo[1,5-a]pyrimidine-6-carbonitriles with good to excellent yields in short reaction time.


Sign in / Sign up

Export Citation Format

Share Document