scholarly journals Ballast water management for sustainable development – some remarks on Polish law

2018 ◽  
Vol 57 ◽  
pp. 01027
Author(s):  
Dorota Pyć

The main aim of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments (BWM Convention) is to prevent, minimize and ultimately eliminate the risk of introducing harmful aquatic organisms and pathogens (HAOP) transferred in ships’ ballast waters and sediments to non-native environment for them, mainly for waters in seaports and coastal waters. The BWM Convention entered into force globally on 8 September 2017. This convention is based on the precautionary principle and the ecosystem approach to achieving sustainable development goals. Effective protection and preservation of the maritime environment depends on the preventive and reasonable actions, especially in case of environmental threats or combating pollution. This means that it is necessary to react efficiently by relevant authorities and boost international and regional cooperation, as well as development of other instruments such as inspection and reporting systems. The purpose of this paper is to present the state of preparation to the implementation of the BWM Convention in connection with its ratification by Poland, which is planned for 2018.

Author(s):  
M. Diasamidze ◽  
A. Shotadze

Ballast water provides stability and maneuverability to a ship. Large ships can carry millions of gallons of ballast water. Ballast water discharged by ships can have a negative impact on the marine environment. There are thousands of marine species that may be carried in ships’ ballast water; In order to reduce the risk of new introductions of exotic species, the UN International Maritime Organization (IMO) has adopted the International Convention for the Control and Management of Ship’s Ballast Water and Sediments in 2004. This Convention aims ‘to continue the development of safer and more effective Ballast Water Management options that will result in continued prevention, minimization and ultimate elimination of the transfer of harmful aquatic organisms and pathogens’. To prevent possible invasions, organisms should not be discharged from ballast tanks. This can be achieved by treating the ballast water, for instance by killing organisms that are travelling in the ballast water.


Author(s):  
Robin Fearnley

Ratification of the International Maritime Organization (IMO) International Convention for the Control and Management of Ships' Ballast Water and Sediments (BWMC)[i] has now forced the hand of operators and ship owners to comply with the BWM, and without a great deal of time to react. The need to integrate and operate Ballast Water Treatment (BWT) Systems on In-Service ships, however, is not new, and BMT have recent and relevant experience in end-to-end BWT system solutions. In 2011 BMT Defence Services Ltd (BMT) produced the installation specification to enable A and P Falmouth Ltd (A and P) to carry out a ballast water treatment plant retrofit installation on the RFA Bay Class ships (i.e. RFA MOUNTS BAY, LARGS BAY and CARDIGAN BAY), enabling the ship to be approved and operated in compliance with the BWMC. In addition, BMT produced documentation to enable A and P to arrange, manage and perform the necessary test, trials and commissioning to prove the equipment installation and that it can be operated in accordance with the requirements of the BWMC. The objective of this paper is to take the reader through the process of design and embodiment of a BWT system retrofit on a relatively complex (with respect to the ballast system) ship. The Bay Class ships are Landing Ship Dock (Auxiliary) ships with separate forward and aft ballast systems (to allow the ships to function in their amphibious roles by way of their stern dock), and a ship wide Ballast Stripping system. Key design and engineering considerations are discussed below and recommendations for the installation of a ballast water treatment system are also offered. International Convention for the Control and Management of Ships' Ballast Water and Sediments, International Maritime Organization, Adoption: 13 February 2004; Entry into force: 8 September 2017.


Author(s):  
Yang Yong ◽  
Ma Jie

With the process of industry productions, the polar region which is the last maiden land for human being on the earth is confronted to the environment pollution increasingly. In accordance with the development of green shipbuilding technologies in the world, the ballast system of a science icebreaker should be researched and designed particularly because the International Maritime Organization (IMO) has developed international legislation, the International Convention for the Control and Management of ships’ ballast water and sediments, to regulate discharges of ballast water and reduce the risk of introducing non-native species from ships’ ballast water. Not only the scientific research icebreaker is ensured to work normally in the polar region, but also the weak ocean environment is protected.


2017 ◽  
Vol 10 (3) ◽  
pp. 187
Author(s):  
Urkhan Alakbarov ◽  
John E. S. Lawrence

In face of mounting evidence for complex environmental threats to human development, countries have been seeking new paths to progress less damaging to the planet. The objective of this paper is to explore innovative ways for monitoring efficiency of sustainable development policy, not only in the Caucasus region, but beyond. We propose that this goal can beachieved through two steps: measuring energy use as a contributing element to gross domestic production (GDP) and the associated progression in equitable distribution of national wealth. The case is presented of Azerbaijan, a vibrant, resource-rich Caucasian country which has demonstrated spectacular GDP growth only a few years into independence from the former Soviet Union. Using a single indicator, energy consumption for GDP production, in association with the classic Gini coefficient of economic equity, the authors argue empirically for renewed and innovative measurement of progress towards achievement of crucial United Nations Sustainable Development Goals.


2017 ◽  
Author(s):  
Paul Evans ◽  
Emma Langley

The adoption of the International Convention for the Control and Management of Ships’ Ballast Water and Sediments (BWMC) in 2004 (herewith the Convention) has sought to prevent the spread of harmful aquatic organisms and pathogens in the ballast water and sediments of ships, threatening marine ecosystems worldwide. The Convention sets out the various requirements and the various steps vessels owners / operators and port States need to undertake in order to effectively manage ballast water and sediments. However, there are still open issues and uncertainty, including the scientific and practical challenges of sampling of ballast tanks and monitoring compliance with the Convention’s standards. In order to monitor compliance with the Convention’s standards, documented management practices can be inspected for appropriateness and inspection of vessel log books can give an indication that practices have been implemented. However, sampling is the most effective way to ensure compliance with standards set out in the Convention. To check compliance with the D-1 (exchange) standard, vessel log books should be inspected and sampling can be used to check for anomalies in the composition of the ballast water (e.g. salinity). D-1 compliance is intended as an interim step until treatment systems are more widely available – although, some ports may require exchange as well as treatment in the long term. Compliance with the D-2 (performance) standard following treatment of the ballast water requires the sampling of biological, chemical and physical parameters. Whether checking compliance to the D-1 or D-2 standards, there are significant sampling challenges. These include the logistics of gaining vessel access; having multiple sample methods available to suit ballast tank access restrictions; getting a representative sample; sample analyses; sample interpretation and; what to do if a sample fails? In addition to this, local requirements can present further challenges (e.g. small time windows for bacterial analysis). This paper will highlight the difficulties of sampling ballast tanks in practice, drawing from national and international experiences, and will also comment more broadly on the sampling process and governance – such as regional differences and the role of port State control. Drawing on protocols adopted by other states will help to facilitate a more efficient, consistent and organised implementation of the Convention to the shipping community worldwide.


Pomorstvo ◽  
2021 ◽  
Vol 35 (2) ◽  
pp. 207-214
Author(s):  
Katarina Balić ◽  
Damir Zec

The paper analyses statutory foundations applicable to ships requiring to be exempted from the mandatory installation of the ballast water management system. In particular, it deals with ships sailing on regular international lines but within the semi-closed seas, such as the Adriatic Sea. The legal framework is set out in the International Convention for the Control and Management of Ships’ Ballast Water and Sediments (BWM, 2004), the IMO Guidelines for Risk Assessment A-4 (G7), and the Croatian Ordinance on Ballast Water Control and Management, 2012 [Pravilnik o upravljanju i nadzoru balastnih voda]. The paper presents the model procedure to be followed by main stakeholders, mainly national maritime administrations and shipping companies. The paper outlines the main advantages and disadvantages of the whole process and analyses several cases of good practice. Furthermore, the main stakeholders in the approval procedure and their responsibilities are described, available risk assessment models are analysed, with the particular emphasis on the species-specific risk assessment method as the most preferred method. Finally, the need for cooperation between the involved states and their maritime administrations is considered. It is concluded that bilateral and regional cooperations are an essential element in preserving the marine environment of any sea area. In that respect, the proposed model of the BWM system exemption approval in closed and semi-closed seas, such as the Adriatic Sea, is essential for shipping companies connecting ports in different countries on regular routes. Although demanding in respect of efforts and time, a procedure is viable and may be carried out in due time and with satisfactory outcomes.


Kapal ◽  
2016 ◽  
Vol 13 (3) ◽  
pp. 126
Author(s):  
Mohammad Sholikhan Arif ◽  
Hesty Anita Kurniawati ◽  
M. Nurul Misbah

Peraturan yang mengatur dan manajemen dari air ballas dikeluarkan oleh IMO (International Maritime Organization) melalui konvensi Manajemen air ballas. Konvensi tersebut menyatakan bahwa organisme yang berbahaya terhadap lingkungan, kesehatan manusia, properti atau sumber daya merusak keanekaragaman hayati atau mengganggu pemanfaatan terhadap suatu area jika dilepaskan di air laut. Pemerintah Republik Indonesia mengeluarkan Peraturan Presiden No. 132 tahun 2015 mengenai pengesahan Konvensi internasional untuk pengendalian dan manajemen air ballas dan sedimen dari kapal 2004 (The  International Convention for the control and management of ships ballast water and sediment’s 2004). Penelitian ini bertujuan untuk menganalisa sejauh mana kesiapan Indonesia dalam ratifikasi peraturan (come into force) Ballast water Management serta dampak yang diakibatkan setelah peraturan tersebut diratifikasi. Metode yang dilakukan dalam penelitian ini menggunakan 3 pendekatan yaitu dari aspek hukum, aspek teknis dan aspek ekonomis. Hasil dari penelitian ini adalah Peraturan Pemerintah Nomor 21 Tahun 2010 tentang Perlindungan Lingkungan Maritim sebagai jabaran dari Undang-Undang Nomor 17 Tahun 2008 tentang Pelayaran, telah sejalan dengan Konvensi Internasional untuk Pengendalian dan Manajemen Air Ballas dan Sedimen dari Kapal, 2004 dan Undang-Undang Nomor 17 Tahun 1985 tentang pengesahan United Nations Convention on the LAW of the Sea (UNCLOS). Serta Penggunaan sistem manajemen air ballas untuk kapal di perairan Indonesia lebih efektif dan efisien menggunakan filtration + electrolysis


2021 ◽  
Vol 13 (14) ◽  
pp. 7648
Author(s):  
Kun-Tu Lu ◽  
Hon-Kit Lui ◽  
Chen-Tung Arthur Chen ◽  
Li-Lian Liu ◽  
Lei Yang ◽  
...  

Based on the International Convention for the Control and Management of Ships’ Ballast Water and Sediments (the Ballast Water Management Convention, or BWM Convention) of the International Maritime Organization, from 8 September 2017, all ships must have an approved Ballast Water Management Treatment System (BWTS) to prevent the invasion of alien species through the discharge of ballast. Generally speaking, the need for an approved BWTS is limited to large vessels, as they are too large or too expensive for small vessels to install. This study aims to propose a simple ballast-free approach for small vessels (e.g., tugs, workboats, research vessels) that require ballast to compensate for the weight loss of fuel when sailing. Our approach involves refitting the dedicated ballast tank of these small vessels to be drinking water tanks and filling the tanks with onboard-generated distilled or reverse osmosis water to adjust the stability of the ships. We assessed our approach using three vessels. Two ships using our proposed method were certified by the American Bureau of Shipping as containing no ballast water tank, and not being subject to the BWM Convention. This study provides an environmentally harmless, easy to use, and economical approach for small vessels to comply with the BWM Convention.


2021 ◽  
Vol 128 ◽  
pp. 06001
Author(s):  
Dmitry Ivanov ◽  
Mariia Levina

The article is devoted to the study of the role of the regional component in implementation of the Agenda for Sustainable Development until 2030. Achievement of the 17 Goals and 169 targets in the field of sustainable development indicated in it can hardly be conditioned only by the successful and effective policy of each of the UN member states in this direction. This is explained, first of all, by the fact that the implementation of the Agenda envisages both the interaction of countries at a universal level and largely depends on their regional cooperation, including through integration associations. Wherein, the study of the relevant experience of the Eurasian Economic Union as one of the largest regional associations of economic integration is of considerable interest in this matter. The authors consider practical achievement of the mentioned Goals, primarily Goal 8, through the prism of ensuring freedom of movement of labor within the Union and the effective functioning of its common labor market.


Sign in / Sign up

Export Citation Format

Share Document